X-Git-Url: https://iankelling.org/git/?p=automated-distro-installer;a=blobdiff_plain;f=pxe-server;h=6137386a1188d9ab9c50e4bee783e7ee57dfc053;hp=b8e2092214931505d5a050a03cb04af61f3e7439;hb=HEAD;hpb=c4337bdfa287cb3160b294d58c64b51f870117ea

diff --git a/pxe-server b/pxe-server
index b8e2092..1e99b03 100755
--- a/pxe-server
+++ b/pxe-server
@@ -15,146 +15,272 @@
 # along with this program; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 
-# Setup dhcp server to point to tftp server,
-# and depending on the type, setup the tftp server.
 
-# usage: $0 TYPE
-# default distro is the base debian/fedora type. others are fai & arch.
-# for no pxe server, use a no-op like : or true.
+[[ $EUID == 0 ]] || exec sudo -E "${BASH_SOURCE[0]}" "$@"
 
-set -eE -o pipefail
-trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
+readonly this_file="$(readlink -f -- "${BASH_SOURCE[0]}")"
+script_dir="${this_file%/*}"
+# shellcheck source=./bash-trace
+source "${script_dir}/bash-trace"
+cd $script_dir
+PATH="$PATH:$PWD"
 
 
 usage() {
-    cat <<EOF
-Usage: ${0##*/} [OPTIONS] TYPE [HOST]
-One line description
+  cat <<EOF
+Usage: ${0##*/} [OPTIONS] [HOST] [TYPE]
+Configure dnsmasq boot options and fai-chboot if appropriate. This is
+not general purpose, it has code specific to dhcp servers I run.
 
-TYPE is one of arch, plain, fai, or : for no pxe server.
-HOST makes the pxe server only for that specific host
+Without TYPE, disable  server and fai server. In that case, HOST is only
+needed for fsf office network.
 
+HOST       Only do dhcp pxe for HOST. The hostname must be known to the dhcp
+           server to target its mac. Use "default" for all hosts.
+           Required in fsf office environment.
+
+TYPE       One of arch, parabola, plain, fai.
+
+-a         Don't setup pxe, just Wait for 2 dhcp acks, then disable the pxe
+           server after a delay.  First ack is for pxe boot, 2nd ack is
+           for os boot. Sometimes on debian, there is a 3rd one shortly
+           after the 2nd. I can't remember exactly why this caused a
+           problem, but I'm hoping the sleep will take care of it.
+-d         Don't alter dhcp config. Only make sense for fai type, and on network
+           other than home or fsf, when using fai-cd, or pxe-kexec.
+-k         Pass -k to myfai-chboot.
+--no-r     Pass --no-r to myfai-chboot.
+-r         Don't redeploy fai config. For example, if there is a different host
+           that is mid-install.
+
+-S         sets FAI_ACTION=sysinfo, see myfai-chboot for more info.
+-w         Setup pxe, then wait like -a.
 -h|--help  Print help and exit
---         Subsequent arguments are never treated as options
--r         Don't redeploy fai config.
--a         Wait for 2 dhcp acks, then disable the pxe server after a delay.
-           First ack is for pxe boot, 2nd ack is for os boot. Sometimes
-           on debian, there is a 3rd one shortly after the 2nd. I can't remember
-           exactly why this caused a problem, but I'm hoping the sleep
-           will take care of it.
+
+
+Note, when switching between plain and arch or parabola, you will need to
+do something like:
+ssh wrt
+cd /mnt/usb
+rm tftpboot
+ln -s <arch/parabola/debian iso dir> tftpboot
+
+
+Notes on debugging pxe dhcp tftp:
+
+For debugging dhcp, add to /etc/dnsmasq.conf: log-dhcp
+
+Newer openwrt runs dnsmasq with a whitelist of readable files and dirs:
+
+ps ww :
+/sbin/ujail -t 5 -n dnsmasq -u -l -r /bin/ubus -r /etc/TZ -r /etc/dnsmasq.conf -r /etc/ethers -r /etc/group -r /etc/hosts -r /etc/passwd -w /tmp/dhcp.leases -r /tmp/dnsmasq.d -r /tmp/hosts -r /tmp/resolv.conf.d -r /usr/bin/jshn -r /usr/lib/dnsmasq/dhcp-script.sh -r /usr/share/dnsmasq/dhcpbogushostname.conf -r /usr/share/dnsmasq/rfc6761.conf -r /usr/share/dnsmasq/trust-anchors.conf -r /usr/share/libubox/jshn.sh -r /var/etc/dnsmasq.conf.cfg01411c -w /var/run/dnsmasq/ -- /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c -k -x /var/run/dnsmasq/dnsmasq.cfg01411c.pid
+
+logging tftp requests:
+/etc/default/tftpd-hpa:
+add -vv:
+TFTP_OPTIONS="--secure -vv"
+jr -u tftpd-hpa -f
+
+Note: Uses GNU getopt options parsing style
 EOF
-    exit $1
+  exit $1
 }
 
+pre="${0##*/}:"
+m() { printf "$pre %s\n"  "$*"; "$@"; }
+e() { printf "$pre %s\n"  "$*"; }
+err() { echo "[$(date +'%Y-%m-%d %H:%M:%S%z')]: $pre: $*" >&2; }
+
+PATH="/a/exe:$PATH"
+
 ##### begin command line parsing ########
 
-args=()
+dhcp=true
 redep=true
 acks=2
 wait=false
-while [[ $1 ]]; do
-    case $1 in
-        --) shift; break ;;
-        -h|--help) usage ;;
-        -r) redep=false; shift ;;
-        -a) wait=true; shift ;;
-        *) args+=("$1"); shift ;;
-    esac
-done
-args+=("$@")
+fsf_office=false
 
+case $HOSTNAME in
+  x3|kw) fsf_office=true ;;
+esac
 
-read type host <<<"${args[@]}"
+chboot_args=()
+temp=$(getopt -l no-r,help adkrSwh "$@") || usage 1
+eval set -- "$temp"
+while true; do
+  case $1 in
+    -a) wait=true; set=false; shift ;;
+    -d) dhcp=false; shift ;;
+    -k) chboot_args+=(-k); shift ;;
+    --no-r) chboot_args+=(--no-r); shift ;;
+    -r) redep=false; shift ;;
+    -S) chboot_args+=(-S); shift ;;
+    -w) wait=true; set=true; shift ;;
+    -h|--help) usage ;;
+    --) shift; break ;;
+    *) echo "$0: Internal error!" ; exit 1 ;;
+  esac
+done
+
+read -r host type <<<"$@"
 
-if [[ ! $type ]]; then
-    echo "$0: error: exptected 1 argument of type"
+case $# in
+  [01]);;
+  2)
+    case $type in
+      arch|parabola) cmd=archlike ;;
+      fai) cmd=fai ;;
+      *)
+        echo "$0: error expected type of arch|parabola|fai"
+        echo
+        usage 1
+        ;;
+    esac
+    ;;
+  *)
+    echo "$0: error: expected 0-2 arguments"
+    echo
     usage 1
+    ;;
+esac
+
+
+if $wait && ! $dhcp; then
+  echo "$0: error -w conflicts with -d, choose one or other" >&2
+  exit 1
 fi
 
-if [[ $host ]]; then
-    host_tag="tag:$host,"
+if $fsf_office && [[ ! $host ]]; then
+  echo "$0: at fsf_office, provide HOST arg" >&2
+  exit 1
+  fi
+
+if [[ $host && $host != default ]]; then
+  host_tag="tag:$host,"
 fi
 
 ##### end command line parsing ########
 
-e() {
-    echo "$@"
-    "$@"
-}
-
-arch() {
-    cat <<EOF
-dhcp-option-force=209,boot/syslinux/archiso.cfg
-dhcp-option-force=210,/arch/
-dhcp-boot=${host_tag}/arch/boot/syslinux/lpxelinux.0
+archlike() {
+  cat <<EOF
+${host_tag}209,boot/syslinux/${type}iso.cfg
+${host_tag}210,/${type}/
+${host_tag}option:bootfile-name,/${type}/boot/syslinux/lpxelinux.0
 EOF
 }
 
 plain() {
-    # if arch was used before, this additionally needs
-    # the tftp link in /mnt/usb to be changed.
-    cat <<EOF
-dhcp-boot=${host_tag}pxelinux.0
+  # if arch based was used before, this additionally needs
+  # the tftp link in /mnt/usb to be changed.
+  cat <<EOF
+${host_tag}option:bootfile-name,pxelinux.0
 EOF
 }
 
 fai() {
-    cat <<EOF
-$set_host_tag
-dhcp-boot=${host_tag}fai/pxelinux.0,faiserver.lan,faiserver.lan
+  cat <<EOF
+${host_tag}option:bootfile-name,pxelinux.0
+${host_tag}option:server-ip-address,$faiserverip
+${host_tag}option:tftp-server,$faiserverip
 EOF
+  # Note, previously used normal dnsmasq option, but it requires dnsmasq
+  # restart, which causes momentary dns failures, which can bork an
+  # install.
+  #
+  # dhcp-boot=${host_tag}pxelinux.0,faiserver.b8.nz,faiserver.b8.nz
 }
 
 ack-wait() {
-    wait_count=$1
-    if [[ $host ]]; then
-        host_regex=" $host"
+  if $fsf_office; then
+    wait_cmd="ssh tarantula.office.fsf.org tail -n0 -f /var/log/syslog"
+  else
+    wait_cmd="ssh cmc logread -f"
+  fi
+  wait_count=$1
+  if [[ $host ]]; then
+    if $fsf_office; then
+      host_regex=" $(getent hosts kw | awk '{print $1}' | sed 's/\./\\./g')"
+    else
+      host_regex=" $host"
     fi
-    regex=".*DHCPACK.*$host_regex$"
-    i=0
-    tmp=$(mktemp)
-    while (( i != wait_count )) && read line; do
-        if [[ $line =~ $regex ]]; then
-            i=$((i+1))
-            echo $line
-        fi
-    done < <(ssh wrt logread -f)
-    e sleep 20
+  fi
+  regex=".*DHCPACK.*$host_regex\b"
+  i=0
+  while (( i != wait_count )) && read -r line; do
+    if [[ $line =~ $regex ]]; then
+      i=$((i+1))
+      echo $line
+    fi
+  done < <($wait_cmd ||:) # tail returns 2 it seems
+  m sleep 20
 }
 
 set-pxe() {
-    ${1:-$type} | ssh wrt "cedit pxe-server /etc/dnsmasq.conf || /etc/init.d/dnsmasq restart
-if [[ $type == arch ]]; then arch-pxe-mount; fi"
+  $dhcp || return 0
+  if $fsf_office; then
+    if [[ ! $cmd ]]; then
+      e "removing pxe for $host on tarantula"
+      ssh tarantula.office.fsf.org bash -e <<EOF
+sed -ri 's/^( *host +$host *\{).*/\1/' /etc/dhcp/dhcpd.conf
+systemctl restart isc-dhcp-server
+EOF
+    elif [[ $cmd == fai ]]; then
+      e "adding pxe for $host on tarantula"
+      ssh tarantula.office.fsf.org bash -e <<EOF
+sed -ri 's/^( *host +$host *\{).*/\1 next-server faiserver.office.fsf.org; filename "pxelinux.0";/' /etc/dhcp/dhcpd.conf
+systemctl restart isc-dhcp-server
+EOF
+    fi
+  else
+    e "updating dnsmasq.conf:"
+    m $cmd
+    ${cmd:-:}|ssh cmc "dd of=/var/run/dnsmasq/dhcpopts.conf; /etc/init.d/dnsmasq reload
+$([[ $type == arch || $type == parabola ]] && echo archlike-pxe-mount)"
+  fi
 }
 
-if ! $wait && [[ $type != : ]]; then
-    set-pxe
+type -t host &>/dev/null || sudo apt-get -y install dnsutils
+faiserverip=$(host faiserver | sed -rn 's/^\S+ has address //p;T;q' ||:)
+if [[ ! $faiserverip || $faiserverip =~ [[:space:]] ]]; then
+  echo "$0: error: failed to get \$faiserverip, got: $faiserverip"
+  exit 1
+fi
+
 
-    if [[ $type == fai ]]; then
-        if $redep; then
-            fai-redep
-        fi
-        faiserver-enable
+if $set; then
+  set-pxe
+  if [[ $type == fai ]]; then
+    if $redep; then
+      m fai-redep
     fi
+    m myfai-chboot ${chboot_args[@]} $host
+  else
+    # This will fail if faiserver is not setup, so ignore any
+    # failure and don't bother us about it.
+    m myfai-chboot &>/dev/null ||:
+  fi
 fi
 
 if $wait; then
-    # fai's debian jessie 8.5ish does 2 dhcp requests when booting,
-    # roughly 4 seconds apart. Earlier
-    # versions did just 1. Now testing on a vm, it does 1.
-    # bleh.
-    echo "waiting for $acks dhcp acks then disabling pxe"
-    ack-wait $acks
-    set-pxe :
-
-    # previously tried waiting for one more ack then disabling faiserver,
-    # since it can contain sensitive info, so turn it off when not in use,
-    # but disabling that for now as it's inconvenient to clean this
-    # up and run it in the background etc.
-
-    # if [[ $type == fai ]]; then
-    #     echo "waiting for 1 dhcp ack then disabling fai server"
-    #     ack-wait 1
-    #     faiserver-disable
-    # fi
+  # fai's debian jessie 8.5ish does 2 dhcp requests when booting,
+  # roughly 4 seconds apart. Earlier
+  # versions did just 1. Now testing on a vm, it does 1.
+  # bleh.
+  echo "waiting for $acks dhcp acks then disabling pxe"
+  ack-wait $acks
+  type=
+  unset cmd
+  set-pxe
+
+  # previously tried waiting for one more ack then disabling faiserver,
+  # since it can contain sensitive info, so turn it off when not in use,
+  # but disabling that for now as it's inconvenient to clean this
+  # up and run it in the background etc.
+
+  # if [[ $type == fai ]]; then
+  #     echo "waiting for 1 dhcp ack then disabling fai server"
+  #     ack-wait 1
+  #     faiserver-disable
+  # fi
 fi