X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=wrt-setup-local;h=aabfca3fb5c030be02a9de91f34454fa27399a8f;hb=HEAD;hp=8b53702f3a0eb8eeebff81791a902be47fd242f2;hpb=f856a11aa6b4aaa454a5c93c4f1d9672591ca2eb;p=automated-distro-installer

diff --git a/wrt-setup-local b/wrt-setup-local
index 8b53702..527e4a8 100755
--- a/wrt-setup-local
+++ b/wrt-setup-local
@@ -16,7 +16,8 @@
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
 
 
-f=/usr/local/lib/err;test -r $f || { echo "error: $0 no $f" >&2;exit 1;}; . $f
+set -e; . /usr/local/lib/bash-bear; set +e
+
 
 usage() {
   cat <<EOF
@@ -53,7 +54,7 @@ libremanage_host=wrt2
 lanip=1
 while getopts hm:t:yz opt; do
   case $opt in
-    h) usage ;;
+    h) usage 0 ;;
     t)
       case $2 in
         2|3)
@@ -112,6 +113,7 @@ fi
 secrets=false
 if [[ -e /root/router-secrets ]]; then
   secrets=true
+  # shellcheck source=/p/router-secrets
   source /root/router-secrets
 fi
 
@@ -139,7 +141,7 @@ pmirror() {
   # doesn't go into the firmware. build new firmware if you want
   # lots of upgrades. I think /tmp/opkg-lists is a pre openwrt 14 location.
   f=(/var/opkg-lists/*)
-  if ! (( $(date -r $f +%s) + 60*60*24 > $(date +%s) )); then
+  if ! (( $(date -r ${f[0]} +%s) + 60*60*24 > $(date +%s) )); then
     if ! opkg update; then
       echo "$0: warning: opkg update failed" >&2
     fi
@@ -157,7 +159,7 @@ pi() {
       pmirror
     fi
   done
-  if [[ $to_install ]]; then
+  if (( ${#to_install[@]} >= 1 )); then
     opkg install ${to_install[@]}
   fi
 }
@@ -238,7 +240,7 @@ fi
 if $secrets; then
   key=${rkey[$h]}
 fi
-: ${key:=pictionary49}
+: "${key:=pictionary49}"
 
 mask=255.255.0.0
 cidr=16
@@ -536,8 +538,7 @@ EOF
 #         option config /etc/openvpn/client.conf
 # EOF
 
-wgip4=10.3.0.1/24
-wgip6=fdfd::1/64
+
 wgport=26000
 
 network_restart=false
@@ -577,10 +578,10 @@ if $network_restart; then
   v /etc/init.d/network reload
 fi
 
-firewall-cedit() {
 
-  if $client; then
-    cedit wific /etc/config/firewall <<EOF
+### begin firewall edits ###
+if $client; then
+  cedit wific /etc/config/firewall <<EOF || firewall_restart=true
 config zone
  option name    wwan
  option input    REJECT
@@ -590,11 +591,11 @@ config zone
  option mtu_fix  1
  option network  wwan
 EOF
-  fi
+fi
 
-  case $hostname in
-    wrt)
-      cedit host /etc/config/firewall <<EOF
+case $hostname in
+  wrt)
+    cedit host /etc/config/firewall <<EOF || firewall_restart=true
 config redirect
  option name ssh
  option src              wan
@@ -602,9 +603,9 @@ config redirect
  option dest_ip          $l.3
  option dest             lan
 EOF
-      ;;
-    cmc)
-      cedit host /etc/config/firewall <<EOF
+    ;;
+  cmc)
+    cedit host /etc/config/firewall <<EOF || firewall_restart=true
 config redirect
  option name ssh
  option src              wan
@@ -612,11 +613,12 @@ config redirect
  option dest_ip          $l.2
  option dest             lan
 EOF
-      ;;
-  esac
-
+    ;;
+esac
 
-  cedit /etc/config/firewall <<EOF
+{
+  /root/cmc-firewall-data
+  cat <<EOF
 ## begin no external dns for ziva
 config rule
  option src  lan
@@ -684,32 +686,6 @@ config rule
  option target           ACCEPT
  option dest_port        9091
 
-
-config redirect
- option name nagioskd
- option src              wan
- option src_dport        3005
- option dest_port        3005
- option dest_ip          $l.2
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        3005
-
-
-config redirect
- option name sshkd
- option src              wan
- option src_dport        2202
- option dest_port        22
- option dest_ip          $l.2
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        2202
-
 # was working on an openvpn server, didn't finish
 # config redirect
 #  option name vpnkd
@@ -737,67 +713,6 @@ config rule
  option dest_port        8989
 
 
-config redirect
- option name sshx2
- option src              wan
- option src_dport        2205
- option dest_port        22
- option dest_ip          $l.5
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        2205
-
-config redirect
- option name sshx3
- option src              wan
- option src_dport        2207
- option dest_port        22
- option dest_ip          $l.7
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        2207
-
-config redirect
- option name sshtp
- option src              wan
- option src_dport        2208
- option dest_port        22
- option dest_ip          $l.8
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        2208
-
-config redirect
- option name sshbb8
- option src              wan
- option src_dport        2209
- option dest_port        22
- option dest_ip          $l.9
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        2209
-
-
-config redirect
- option name sshfrodo
- option src              wan
- option src_dport        2228
- option dest_port        22
- option dest_ip          $l.28
- option dest             lan
-config rule
- option src              wan
- option target           ACCEPT
- option dest_port        2228
-
 
 config redirect
  option name icecast
@@ -824,6 +739,18 @@ config rule
  option dest_port        $wgport
  option proto            udp
 
+config redirect
+ option name navidromehttps
+ option src              wan
+ option src_dport        4500
+ option dest_port        4500
+ option dest_ip          $l.2
+ option dest             lan
+config rule
+ option src              wan
+ option target           ACCEPT
+ option dest_port        4500
+
 config redirect
  option name navidrome
  option src              wan
@@ -836,7 +763,7 @@ config rule
  option target           ACCEPT
  option dest_port        4533
 
-# So a client can just have i.b8.nz dns even when they
+# So a client can just have b8.nz dns even when they
 # are on the lan.
 #config redirect
 # option name navidromelan
@@ -864,7 +791,7 @@ config redirect
  option src              wan
  option src_dport        80
  option dest             lan
- option dest_ip          $l.2
+ option dest_ip          $l.7
  option proto            tcp
 config rule
  option src              wan
@@ -877,7 +804,7 @@ config redirect
  option src              wan
  option src_dport        443
  option dest             lan
- option dest_ip          $l.2
+ option dest_ip          $l.7
  option proto            tcp
 config rule
  option src              wan
@@ -965,8 +892,9 @@ config rule
  option family ipv6
 
 EOF
-}
-firewall-cedit || firewall_restart=true
+} | cedit /etc/config/firewall || firewall_restart=true
+### end firewall edits ###
+
 
 # firewall comment:
 # not using and in newer wrt, fails, probably due to nonexistent file, error output
@@ -1101,32 +1029,14 @@ EOF
   # https dns will need to be blocked by ip in
   # order to be comprehensive
 
-  cedit /etc/unbound/unbound_ext.conf <<EOF || unbound_restart=true
 
-$(cat /root/ptr-data)
+
+  {
+    /root/ptr-data
+    cat  <<EOF
 
 local-data-ptr: "10.2.0.1 cmc.b8.nz"
-local-data-ptr: "10.2.0.4 wrt2.b8.nz"
-local-data-ptr: "10.2.0.6 x2w.b8.nz"
-local-data-ptr: "10.2.0.7 syw.b8.nz"
-local-data-ptr: "10.2.0.9 bb8.b8.nz"
-local-data-ptr: "10.2.0.14 wrt3.b8.nz"
-local-data-ptr: "10.2.0.17 x3w.b8.nz"
-local-data-ptr: "10.2.0.18 tp.b8.nz"
-local-data-ptr: "10.2.0.19 brother.b8.nz"
-local-data-ptr: "10.2.0.23 tpw.b8.nz"
-local-data-ptr: "10.2.0.24 one9p.b8.nz"
-local-data-ptr: "10.2.0.25 hp.b8.nz"
-local-data-ptr: "10.2.0.29 bow.b8.nz"
-local-data-ptr: "10.2.0.31 amazontab.b8.nz"
-local-data-ptr: "10.2.0.32 samsungtab.b8.nz"
-local-data-ptr: "10.2.0.38 x8.b8.nz"
-local-data-ptr: "10.2.0.48 bigs.b8.nz"
-local-data-ptr: "10.2.0.49 pi4.b8.nz"
-local-data-ptr: "10.2.0.50 pi4w.b8.nz"
-local-data-ptr: "10.2.0.52 s22.b8.nz"
-local-data-ptr: "10.2.0.53 cmcap.b8.nz"
-local-data-ptr: "10.2.0.88 demohost.b8.nz"
+
 local-data-ptr: "10.174.2.2 transmission.b8.nz"
 local-data-ptr: "10.173.8.1 defaultnn.b8.nz"
 local-data-ptr: "10.173.8.2 nn.b8.nz"
@@ -1166,6 +1076,7 @@ view:
   # try global if no match in view
   view-first: yes
 EOF
+  } | cedit /etc/unbound/unbound_ext.conf || unbound_restart=true
 
 
   if $unbound_restart; then
@@ -1196,12 +1107,17 @@ fi # end if $ap
 # so make sure we have this dir or else dnsmasq will fail
 # to start.
 mkdir -p /mnt/usb/tftpboot
-cedit /etc/dnsmasq.conf  <<EOF || dnsmasq_restart=true
+
+{
+  # generated with host-info-update
+  /root/dnsmasq-data
+  cat <<EOF
 # no dns
 port=0
 server=/b8.nz/#
 ptr-record=1.0.2.10.in-addr.arpa.,cmc.b8.nz
 
+
 # https://ret2got.wordpress.com/2018/01/19/how-your-ethereum-can-be-stolen-using-dns-rebinding/
 stop-dns-rebind
 rebind-domain-ok=b8.nz
@@ -1257,54 +1173,6 @@ server=10.2.0.1
 
 
 # default dhcp range is 100-150
-# bottom port,  iPXE (PCI 03:00.0) in seabios boot menu
-dhcp-host=c8:60:00:31:6b:75,set:kd,$l.2,kd
-#dhcp-host=94:05:bb:1e:2c:2e,set:bo,$l.38,bo
-# top port, iPXE (PCI 04:00.0) in seabios boot menu
-#dhcp-host=c8:60:00:2b:15:07,set:kd,$l.2,kd
-# 4 is reserved for a staticly configured host wrt2
-
-
-dhcp-host=c4:8e:8f:60:63:cb,set:x2w,$l.6,x2w
-dhcp-host=10:51:07:f5:f1:b8,set:syw,$l.7,syw
-dhcp-host=80:fa:5b:1c:6e:cf,set:amy,$l.8,amy
-dhcp-host=a0:ce:c8:9f:7a:f3,set:sy,$l.12,sy
-# alternate dongle
-#dhcp-host=94:05:bb:1e:2c:2e,set:sy,$l.12,sy
-dhcp-host=00:1f:16:16:39:24,set:x2,$l.13,x2
-
-## for using different dhcp server
-#dhcp-host=52:54:00:9c:ef:ad,ignore
-# 14 = wrt3
-dhcp-host=ac:d1:b8:5c:eb:d7,set:x3w,$l.17,x3w
-dhcp-host=00:1f:16:14:01:d8,set:x3,$l.18,x3
-# BRN001BA98CA823 in dhcp logs
-dhcp-host=00:1b:a9:8c:a8:23,set:brother,$l.19,brother
-
-dhcp-host=00:26:b6:f7:d4:d8,set:amyw,$l.23,amyw
-dhcp-host=9a:c6:52:6f:ce:7c,set:onep9,$l.24,onep9
-dhcp-host=38:63:bb:07:5a:f9,set:hp,$l.25,hp
-dhcp-host=14:dd:a9:d5:31:7a,set:frodo,$l.28,frodo
-#dhcp-host=00:26:b6:f6:0f:e9,set:frodow,$l.28,frodow
-dhcp-host=70:a6:cc:3a:bb:b4,set:bow,$l.29,bow
-dhcp-host=6c:56:97:88:7b:74,set:amazontab,$l.31,amazontab
-dhcp-host=0a:8a:9b:cf:b5:ec,set:samsungtab,$l.32,samsungtab
-# server d16:
-dhcp-host=38:2c:4a:c9:33:13,set:bigs,$l.48,bigs
-dhcp-host=e4:5f:01:07:50:40,set:pi4,$l.49,pi4
-dhcp-host=e4:5f:01:07:50:3f,set:pi4w,$l.50,pi4w
-# samsung phone
-dhcp-host=a8:79:8d:71:54:68,set:s22,$l.52,s22
-
-# This is so fai can have an explicit name to use for testing,
-# or else any random machine which did a pxe boot would get
-# reformatted. The mac is from doing a virt-install, cancelling it,
-# and copying the generated mac, so it should be randomish.
-dhcp-host=52:54:00:9c:ef:ad,set:demohost,$l.88,demohost
-
-
-# faiserver vm
-#dhcp-host=52:54:00:56:09:f9,set:faiserver,$l.15,faiserver
 
 # template
 # dhcp-host=,$l.,
@@ -1321,6 +1189,8 @@ dhcp-optsfile=/var/run/dnsmasq/dhcpopts.conf
 # for debugging dhcp
 #log-queries=extra
 EOF
+} | cedit /etc/dnsmasq.conf || dnsmasq_restart=true
+
 
 
 if $dnsmasq_restart && ! $dev2 && ! $ap; then