X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=switch-mail-host;h=11c0f40a382f17906fab4621ed0e9543ac9e6b29;hb=41235a1a070914920dc84f352abee00deccda146;hp=d71d4a8ce4340ab3f57bb8b9f06a84ca89ae3683;hpb=f7eaad64a7c5f3bc851f146e1f258d34f398a7d7;p=distro-setup

diff --git a/switch-mail-host b/switch-mail-host
old mode 100644
new mode 100755
index d71d4a8..11c0f40
--- a/switch-mail-host
+++ b/switch-mail-host
@@ -1,35 +1,51 @@
 #!/bin/bash
-set -x
-set -eE -o pipefail
-trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?" >&2' ERR
+
+source /usr/local/lib/err
 
 usage() {
   cat <<EOF
 Usage: ${0##*/} OLD_HOST NEW_HOST
 
-Adjust home network dns so NEW_HOST resolves locally if it is on the
-local network.  Turn off mail receiving on OLD_HOST, run btrbk to move
-mail to NEW_HOST, turn on mail receiving on NEW_HOST.
+Turn off mail receiving on OLD_HOST, run btrbk to move mail to NEW_HOST,
+turn on mail receiving on NEW_HOST.  Assumes we want to move all
+filesystems unless passing -o.
 
 -o         Only btrbk /o, instead of all filesystems.
--w         Don't try to ssh to wrt. Should only be used in unusual network situation.
 -h|--help  Print help and exit.
 
+I used to adjust home network dns so NEW_HOST resolves locally if it is
+on the local network, but its simpler just not to and just rely
+on the internet. Email can wait.
+
 Note: Uses GNU getopt options parsing style
 EOF
   exit $1
 }
 
+restore_new_btrbk=false
+restore_old_btrbk=false
+cleanup() {
+  if $restore_new_btrbk; then
+    m $new_shell sudo systemctl start btrbk.timer
+  fi
+  if $restore_old_btrbk; then
+    m $old_shell sudo systemctl start btrbk.timer
+  fi
+}
+_errcatch_cleanup=cleanup # used by sourced err
+
+pre="${0##*/}:"
+m() { printf "$pre %s\n"  "$*"; "$@"; }
+e() { printf "$pre %s\n"  "$*"; }
+
 ##### begin command line parsing ########
 
-update_wrt=true # default
 temp=$(getopt -l help owh "$@") || usage 1
-mp_args=
+mp_args="-m /o,/q,/a"
 eval set -- "$temp"
 while true; do
   case $1 in
     -o) mp_args="-m /o"; shift ;;
-    -w) update_wrt=false; shift ;;
     -h|--help) usage ;;
     --) shift; break ;;
     *) echo "$0: Internal error! unexpected args: $*" ; exit 1 ;;
@@ -43,8 +59,8 @@ old_host=$1
 new_host=$2
 source /a/bin/bash_unpublished/source-state
 
-if [[ $old_host != $MAIL_HOST ]]; then
-  read -p "warning: \$old_host != \$MAIL_HOST: $old_host != $MAIL_HOST, proceed? y/N "
+if [[ $old_host != "$MAIL_HOST" ]]; then
+  read -r -p "warning: \$old_host != \$MAIL_HOST: $old_host != $MAIL_HOST, proceed? y/N "
   if [[ $REPLY != [yY] ]]; then
     exit 1
   fi
@@ -68,58 +84,40 @@ if [[ ! $new_host || ! $old_host ]]; then
   exit 1
 fi
 
-at_home=false
-if timeout -s 9 5 ssh-keyscan -p 2220 -t rsa 10.0.0.1 2>/dev/null | grep -qFx '[10.0.0.1]:2220 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCH+/h1dGEfKEusBblndU2e6QT4wLCm5+yqr/sqh/0X9YfjR7BfWWm8nNmuP55cYc+Wuf5ljB1H1acXEcsl1y8e0j3agHfF0V74FE1N1zz5nn2Ep8NHnmqgEhza38ZxMPh+4p3X7zklEKU7+3SzybKBi8sg0wLzlS2LM0JaUN80zR2sK11Kye3dURUXPk78u5wodOkgcEYRwSYaDMJlUzWP+poRXIDJwFaMQnwmxbl/c84yOyaU0x/d6hFwoRscWecihX+vvBNeSyxR4xr2HDOyUWwJkctyAgt2p7w3tfkXOKcCRzTAjGVIMQLTvo0sG/yJbcyHoEFdFybCsgDvfyYn'; then
-  at_home=true
-fi
-echo "$0: at_home = $at_home"
-
-source /a/bin/bash_unpublished/source-state
-#### begin convert private hostnames to public hostnames ####
-#if ! $at_home; then
-#    for var in old_host new_host; do
-#        case ${!var} in
-#            tp)
-#                eval $var=$HOME_DOMAIN
-#                ;;
-#        esac
-#    done
-#fi
-####  end convert private hostnames to public hostnames ####
-
-
-# because our port forward is not robust enough, we can't use proxy command,
-# todo: setup vpn so this is all taken care of.
-if ! $update_wrt; then
-  wrt_shell=:
-else
-  wrt_shell="ssh wrt.b8.nz"
-fi
-
-btrbk_test="systemctl is-active btrbk.service"
-while $new_shell $btrbk_test || $old_shell $btrbk_test; do
-  echo "$0: btrbk is running on new or old host. sleeping for 8 seconds"
-  sleep 6
-  echo "$0: testing for btrbk activity in 2 seconds"
-  sleep 2
-done
-
+e $new_shell hostname
 new_hostname=$($new_shell hostname)
 
 ########### end initial processing, begin actually modifying things ##########
 
-restore_new_btrbk=false
 if $new_shell systemctl is-active btrbk.timer; then
-  $new_shell sudo systemctl stop btrbk.timer
+  m $new_shell sudo systemctl stop btrbk.timer
   restore_new_btrbk=true
 fi
-restore_old_btrbk=false
 if $old_shell systemctl is-active btrbk.timer; then
-  $old_shell sudo systemctl stop btrbk.timer
+  m $old_shell sudo systemctl stop btrbk.timer
   restore_old_btrbk=true
 fi
 
+btrbk_test="systemctl is-active btrbk.service"
+while true; do
+  for shell in "$new_shell" "$old_shell"; do
+    e $shell $btrbk_test
+    status=$($shell $btrbk_test) ||:
+    case $status in
+      inactive|failed) : ;;
+      *)
+        e "btrbk active on shell:$shell, status:$status, sleeping 8 seconds"
+        sleep 8
+        continue
+        ;;
+    esac
+  done
+  break
+done
+
+# ensure these are unused before doing anything
 
+e "umounting /m and /o via $new_shell"
 $new_shell bash -xs <<'EOF'
 set -eE
 if mountpoint -q /m; then sudo umount /m; fi
@@ -140,19 +138,12 @@ EOF
 # I think exim will try ipv6 first, so no need to disable
 # ipv6 i think.
 
-$old_shell primary-setup $new_hostname
+m $old_shell /a/exe/primary-setup $new_hostname
 
 if $localhost_new; then
-  btrbk-run -s $old_host $mp_args
+  m btrbk-run -v -s $old_host $mp_args
 else
-  btrbk-run -t $new_host $mp_args
+  m btrbk-run -v -t $new_host $mp_args
 fi
 
-$new_shell primary-setup $new_hostname
-
-if $restore_new_btrbk; then
-  $new_shell sudo systemctl start btrbk.timer
-fi
-if $restore_old_btrbk; then
-  $old_shell sudo systemctl start btrbk.timer
-fi
+m $new_shell /a/exe/primary-setup $new_hostname