X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=mail-setup;h=e7020d74361301bf5c7b3d82f109b367014fa6cf;hb=5cb8fc0c2a8a3f9ffa3cb4d376075c1217eb6d8c;hp=36b0e9d6345334396ab4010b79a06f3b85bac9a0;hpb=fc2a33b827a7adede9cba7728e381820857189d5;p=distro-setup diff --git a/mail-setup b/mail-setup index 36b0e9d..e7020d7 100755 --- a/mail-setup +++ b/mail-setup @@ -3,6 +3,31 @@ # Copyright (C) 2019 Ian Kelling # SPDX-License-Identifier: AGPL-3.0-or-later +# Things I tend to forget. on MAIL_HOST, daemon runs with /etc/exim4/my.conf, +# due to /etc/default/exim4 containing: +# COMMONOPTIONS='-C /etc/exim4/my.conf' +# UPEX4OPTS='-o /etc/exim4/my.conf' +# +# The non-daemon config +# gets generated from this script calling update-exim4.conf -d /etc/myexim4 +# which has log path +# log_file_path = /var/log/exim4/my%s +# +# eximbackup folder is /bu/md +# it is cleaned up by mail-backup-clean, which is run by btrbk-run + +# shellcheck disable=SC2254 # makes for a lot of unneeded quotes + + +# perusing through /el/mainlog without test messages: +# &!testignore|jtuttle| +# +#&! testignore|jtuttle|eximbackup|/usr/sbin/exim4 -bpu + +# todo: check new macro DKIM_TIMESTAMPS + +# todo: check if REMOTE_SMTP_INTERFACE or REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE can simplify my or fsfs config + # todo: max line length macro changed in t11. look into it # todo: check that all macros we use are still valid in t11 @@ -131,7 +156,8 @@ if [[ -s /usr/local/lib/err ]]; then elif [[ -s /a/bin/errhandle/err ]]; then source /a/bin/errhandle/err else - err "no err tracing script found" + echo "no err tracing script found" + exit 1 fi source /a/bin/distro-functions/src/identify-distros source /a/bin/distro-functions/src/package-manager-abstractions @@ -287,7 +313,7 @@ reload=false if [[ -e /var/local/mail-setup-reload ]]; then reload=true fi -i() { # install file +u() { # update file. note: duplicated in brc local tmp tmpdir dest="$1" local base="${dest##*/}" local dir="${dest%/*}" @@ -295,13 +321,13 @@ i() { # install file # dest has a directory component mkdir -p "$dir" fi - ir=false # i result + ur=false # u result tmpdir=$(mktemp -d) cat >$tmpdir/"$base" tmp=$(rsync -ic $tmpdir/"$base" "$dest") if [[ $tmp ]]; then printf "%s\n" "$tmp" - ir=true + ur=true if [[ $dest == /etc/systemd/system/* ]]; then touch /var/local/mail-setup-reload reload=true @@ -323,9 +349,19 @@ soff () { done } sre() { + local enabled for service; do m systemctl restart $service - m systemctl enable $service; + # Optimization for exim, + # is-enabled: 0m0.015s + # enable: 0m0.748s + # It is related to this message: + # exim4.service is not a native service, redirecting to systemd-sysv-install. + # Executing: /lib/systemd/systemd-sysv-install enable exim4 + enabled=$(systemctl is-enabled $service 2>/dev/null ||:) + if [[ $enabled != enabled ]]; then + m systemctl enable $service + fi done } mailhost() { @@ -427,7 +463,7 @@ fi # * Mail clean cronjob -i /etc/systemd/system/mailclean.timer <<'EOF' +u /etc/systemd/system/mailclean.timer <<'EOF' [Unit] Description=Run mailclean daily @@ -438,7 +474,7 @@ OnCalendar=monthly WantedBy=timers.target EOF -i /etc/systemd/system/mailclean.service < EOF -i /etc/fail2ban/jail.d/exim.local <<'EOF' +u /etc/fail2ban/jail.d/exim.local <<'EOF' [exim] enabled = true port = 25,587 @@ -1025,7 +1061,7 @@ banaction = iptables-exim # 10.173.8.1 = non-nn net ignoreip = 209.51.188.13 2001:470:142::13 209.51.188.92 2001:470:142:3::10 72.14.176.105 2600:3c00:e000:280::2 10.173.8.1 EOF -if $ir; then +if $ur; then m systemctl restart fail2ban fi @@ -1131,26 +1167,26 @@ rm -fv /etc/exim4/conf.d/retry/37_retry cat >/etc/exim4/conf.d/retry/17_retry <<'EOF' # Retry fast for my own domains -iankelling.org * F,1d,4m;F,14d,1h -amnimal.ninja * F,1d,4m;F,14d,1h -expertpathologyreview.com * F,1d,4m;F,14d,1h -je.b8.nz * F,1d,4m;F,14d,1h -zroe.org * F,1d,4m;F,14d,1h -eximbackup.b8.nz * F,1d,4m;F,14d,1h +iankelling.org * F,1d,1m;F,14d,1h +amnimal.ninja * F,1d,1m;F,14d,1h +expertpathologyreview.com * F,1d,1m;F,14d,1h +je.b8.nz * F,1d,1m;F,14d,1h +zroe.org * F,1d,1m;F,14d,1h +eximbackup.b8.nz * F,1d,1m;F,14d,1h # The spec says the target domain will be used for temporary host errors, # but i've found that isn't correct, the hostname is required # at least sometimes. -nn.b8.nz * F,1d,4m;F,14d,1h -defaultnn.b8.nz * F,1d,4m;F,14d,1h -mx.iankelling.org * F,1d,4m;F,14d,1h -bk.b8.nz * F,1d,4m;F,14d,1h -eggs.gnu.org * F,1d,4m;F,14d,1h -fencepost.gnu.org * F,1d,4m;F,14d,1h +nn.b8.nz * F,1d,1m;F,14d,1h +defaultnn.b8.nz * F,1d,1m;F,14d,1h +mx.iankelling.org * F,1d,1m;F,14d,1h +bk.b8.nz * F,1d,1m;F,14d,1h +eggs.gnu.org * F,1d,1m;F,14d,1h +fencepost.gnu.org * F,1d,1m;F,14d,1h # afaik our retry doesnt need this, but just using everything -mx.amnimal.ninja * F,1d,4m;F,14d,1h -mx.expertpathologyreview.com * F,1d,4m;F,14d,1h +mx.amnimal.ninja * F,1d,1m;F,14d,1h +mx.expertpathologyreview.com * F,1d,1m;F,14d,1h mail.fsf.org * F,1d,15m;F,14d,1h @@ -1172,22 +1208,16 @@ cd /etc/exim4 for f in *-private.pem; do echo ${f%-private.pem} done -} | i /etc/exim4/conf.d/my-dkim-domains +} | u /etc/exim4/conf.d/my-dkim-domains -cat >/etc/exim4/conf.d/transport/11_iank <<'EOF' -# This unsets the default macro defined in on t11 in -# /etc/exim4/conf.d/transport/10_exim4-config_transport-macros -# It seems like a very odd choice that this has become -# the default in t11. Normal smarthost clients use username/password -# auth. Oh well. -REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS == -EOF +rm -f /etc/exim4/conf.d/transport/11_iank cat >/etc/exim4/conf.d/main/000_local <<'EOF' MAIN_TLS_ENABLE = true # require tls connections for all smarthosts -REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS = * +REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS = ! nn.b8.nz +REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS = nn.b8.nz # debian exim config added this in 2016 or so? # it's part of the smtp spec, to limit lines to 998 chars @@ -1199,8 +1229,8 @@ REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS = * # other says gmail does not reject. figure out and open a new bug. IGNORE_SMTP_LINE_LENGTH_LIMIT = true -# more verbose logs -MAIN_LOG_SELECTOR = +all +# more verbose logs. used to use +all, but made it less for more efficiency. +MAIN_LOG_SELECTOR = -skip_delivery -tls_cipher -tls_certificate_verified +all_parents +address_rewrite +arguments +deliver_time +pid +queue_time +queue_time_overall +received_recipients +received_sender +return_path_on_delivery +sender_on_delivery +smtp_confirmation +subject # Based on spec, seems like a good idea to be nice. smtp_return_error_details = true @@ -1217,16 +1247,6 @@ smtp_accept_queue_per_connection = 500 DKIM_CANON = relaxed DKIM_SELECTOR = li -# From comments in -# https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4 -# and its best for this to align https://tools.ietf.org/html/rfc7489#page-8 -# There could be some circumstance when the -# from: isnt our domain, but the envelope sender is -# and so still want to sign, but I cant think of any case. -#DKIM_DOMAIN = ${lc:${domain:$rh_from:}} -# In t11, we cant do the above anymore because this is tainted data used in a file lookup. -# /usr/share/doc/exim4/NEWS.Debian.gz suggests to use lookups to untaint data. -DKIM_DOMAIN = ${lookup {${domain:$rh_from:}}lsearch,ret=key{/etc/exim4/conf.d/my-dkim-domains}} # The file is based on the outgoing domain-name in the from-header. # sign if key exists @@ -1269,7 +1289,7 @@ delay_warning_condition = ${if or {\ # enable 587 in addition to the default 25, so that # i can send mail where port 25 is firewalled by isp -daemon_smtp_ports = 25 : 587 +daemon_smtp_ports = 25 : 587 : 10025 # default of 25, can get stuck when catching up on mail smtp_accept_max = 400 smtp_accept_reserve = 100 @@ -1280,9 +1300,27 @@ smtp_reserve_hosts = +iank_trusted LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE = /etc/exim4/conf.d/local_deny_exceptions_acl EOF +if dpkg --compare-versions "$(dpkg-query -f='${Version}\n' --show exim4)" ge 4.94; then + cat >>/etc/exim4/conf.d/main/000_local <<'EOF' +# In t11, we cant do the old anymore because this is tainted data used in a file lookup. +# /usr/share/doc/exim4/NEWS.Debian.gz suggests to use lookups to untaint data. +DKIM_DOMAIN = ${lookup {${domain:$rh_from:}}lsearch,ret=key{/etc/exim4/conf.d/my-dkim-domains}} +EOF +else + cat >>/etc/exim4/conf.d/main/000_local <<'EOF' +# From comments in +# https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4 +# and its best for this to align https://tools.ietf.org/html/rfc7489#page-8 +# There could be some circumstance when the +# from: isnt our domain, but the envelope sender is +# and so still want to sign, but I cant think of any case. +DKIM_DOMAIN = ${lc:${domain:$rh_from:}} +EOF +fi + rm -fv /etc/exim4/rcpt_local_acl # old path -i /etc/exim4/conf.d/local_deny_exceptions_acl <<'EOF' +u /etc/exim4/conf.d/local_deny_exceptions_acl <<'EOF' # This acl already exists in rcpt, this just makes it more widespread. # See the comment there for its rationale. The reason it needs to be # more widespread is that I've turned on sender verification, but cron @@ -1299,7 +1337,7 @@ EOF rm -fv /etc/exim4/data_local_acl # old path -i /etc/exim4/conf.d/data_local_acl <<'EOF' +u /etc/exim4/conf.d/data_local_acl <<'EOF' # Except for the "condition =", this was # a comment in the check_data acl. The comment about this not # being suitable has been changed in newer exim versions. The only thing @@ -1311,7 +1349,7 @@ i /etc/exim4/conf.d/data_local_acl <<'EOF' # those docs are rather old and I see a 110k spam message # pretty quickly looking through my spam folder. -warn +#warn !hosts = +iank_trusted remove_header = X-Spam_score: X-Spam_score_int : X-Spam_bar : X-Spam_report @@ -1335,7 +1373,207 @@ warn EOF -i /etc/exim4/conf.d/router/900_exim4-config_local_user <<'EOF' + +# old file +rm -fv /etc/exim4/conf.d/router/8{8,9}0_backup_copy \ + /etc/exim4/conf.d/router/865_backup_redir \ + /etc/exim4/conf.d/router/870_backup_local + +# It is important for this to exist everywhere except in MAIL_HOST +# non-nn config. Previously, just had it in the nn-config on MAIL_HOST, +# but that is a problem if we change mail host and still have something +# in the queue which was destined for this router, but hosts were +# unreachable, the routers will be reevaluated on the next retry. +u /etc/exim4/conf.d/router/170_backup_copy </etc/exim4/update-exim4.conf.conf <<'EOF' # default stuff, i havent checked if its needed dc_minimaldns='false' -dc_relay_nets='' CFILEMODE='644' dc_use_split_config='true' dc_mailname_in_oh='true' @@ -1514,7 +1753,7 @@ if mailhost; then # in the log it just says "Starting Radicale". If you run # it in the foreground, it will give more info. Background # plus debug does not help. - # sudo -u radicale radicale -D -f + # sudo -u radicale radicale -D # created password file with: # htpasswd -c /p/c/machine_specific/li/filesystem/etc/caldav-htpasswd @@ -1522,8 +1761,9 @@ if mailhost; then # # setup chgrp www-data in ./conflink pi-nostart radicale + m usermod -a -G radicale iank - i /etc/systemd/system/radicale.service.d/override.conf < @@ -2028,9 +2268,11 @@ if [[ $HOSTNAME == bk ]]; then rcdir=${rcdirs[i]} rcbase=${rcdir##*/} ncdir=${ncdirs[i]} + myncdir=/root/${ncdir##*/} + mkdir -p $myncdir # copied from debians cronjob - i /etc/cron.d/$rcbase </dev/null @@ -2090,7 +2332,7 @@ EOF rctmpdir=/var/tmp/$rcbase rcdb=/m/rc/$rcbase.sqlite # config from mailinabox - i $rcdir/config/config.inc.php <tmp.php <$myncdir/tmp.php <config.php - # leave in place for debugging - #m rm -f tmp.php - m sudo -u www-data php $ncdir/occ maintenance:update:htaccess + e running php $myncdir/tmp.php + # note: we leave it around place for debugging + php $myncdir/tmp.php >config.php + cd $ncdir + m sudo -u www-data php occ maintenance:update:htaccess list=$(sudo -u www-data php $ncdir/occ --output=json_pretty app:list) # user_external not compaible with nc 23 for app in contacts calendar; do if [[ $(printf "%s\n" "$list"| jq ".enabled.$app") == null ]]; then - m sudo -u www-data php $ncdir/occ app:install $app + cd $ncdir + m sudo -u www-data php occ app:install $app fi done - i /etc/systemd/system/$ncbase.service <>/etc/exim4/update-exim4.conf.conf <>/etc/exim4/conf.d/main/000_local <>/etc/exim4/update-exim4.conf.conf <>/etc/exim4/update-exim4.conf.conf <>/etc/myexim4/conf.d/main/000_local <<'EOF' # this makes it easier to see which exim is doing what log_file_path = /var/log/exim4/my%s @@ -3130,11 +3325,39 @@ EOF bk) # config for the non-nn exim - cat >/etc/myexim4/conf.d/main/000_local-nn <<'EOF' + cat >>/etc/myexim4/conf.d/main/000_local <<'EOF' MAIN_HARDCODE_PRIMARY_HOSTNAME = mail2.iankelling.org EOF ;; $MAIL_HOST) + + + u /etc/myexim4/conf.d/router/185_sentarchive <<'EOF' +sentarchive: + driver = redirect + domains = ! +local_domains + senders = <; *@fsf.org ; *@posteo.net + condition = ${if !bool{${lookup{$local_part@$domain}lsearch{/etc/exim4/ignore-sent}{true}}}} + data = vojdedIdNejyebni@b8.nz + unseen +EOF + + u /etc/myexim4/conf.d/router/160_backup_redir <<'EOF' +backup_redir: +driver = redirect +# i dont email myself from my own machine much, so lets ignore that. +domains = ! +local_domains +senders = <; *@fsf.org ; *@posteo.net +condition = ${if !bool{${lookup{$local_part@$domain}lsearch{/etc/exim4/ignore-sent}{true}}}} +# b is just an arbirary short string +data = b@eximbackup.b8.nz +# note, to test this, i could temporarily allow testignore. +# alerts avoids potential mail loop. +local_parts = ! root : ! testignore : ! alerts : ! daylert +unseen = true +errors_to = alerts@iankelling.org +EOF + # for bk, we have a exim4in.service that will do this for us. m update-exim4.conf -d /etc/myexim4 ;; @@ -3158,7 +3381,7 @@ if [[ -e /nocow ]]; then if ! grep -Fx "/nocow/exim4 /var/spool/exim4 none bind 0 0" /etc/fstab; then echo "/nocow/exim4 /var/spool/exim4 none bind 0 0" >>/etc/fstab fi - i /etc/systemd/system/exim4.service.d/override.conf <<'EOF' + u /etc/systemd/system/exim4.service.d/override.conf <<'EOF' [Unit] # without local-fs on exim, we get these kind of errors in paniclog on shutdown: # Failed to create spool file /var/spool/exim4//input//1jCLxz-0008V4-V9-D: Permission denied @@ -3212,14 +3435,20 @@ if $reload; then m systemctl daemon-reload fi -# checking bhost_t is redundant, but could help us catch errors. -if $bhost_t || [[ -e /etc/wireguard/wghole.conf ]]; then - # todo: in mail-setup, we have a static list of backup hosts, not *y - m systemctl --now enable wg-quick@wghole +# optimization, this only needs to run once. +if [[ ! -e /sys/class/net/wghole ]]; then + # checking bhost_t is redundant, but could help us catch errors. + if $bhost_t || [[ -e /etc/wireguard/wghole.conf ]]; then + # todo: in mail-setup, we have a static list of backup hosts, not *y + m systemctl --now enable wg-quick@wghole + fi fi -sysd-prom-fail-install epanicclean -m systemctl --now enable epanicclean +# optimization, this only needs to be run once +if [[ ! -e /var/lib/prometheus/node-exporter/exim_paniclog.prom ]]; then + sysd-prom-fail-install epanicclean + m systemctl --now enable epanicclean +fi case $HOSTNAME in je) @@ -3230,8 +3459,11 @@ case $HOSTNAME in ;; esac -m /a/bin/ds/mail-cert-cron -1 -sre mailcert.timer +# optimization, this only needs to run once. +if [[ ! -e /etc/exim4/fullchain.pem ]]; then + m /a/bin/ds/mail-cert-cron -1 + m systemctl --now enable mailcert.timer +fi case $HOSTNAME in $MAIL_HOST|bk) @@ -3268,9 +3500,11 @@ case $HOSTNAME in $MAIL_HOST|bk|je) # start spamassassin/dovecot before exim. sre dovecot spamassassin - # need to wait a bit before restarting exim, else I - # get a paniclog entry like: spam acl condition: all spamd servers failed - sleep 3 + # Wait a bit before restarting exim, else I get a paniclog entry + # like: spam acl condition: all spamd servers failed. But I'm tired + # of waiting. I'll deal with this some other way. + # + # sleep 3 m systemctl --now enable mailclean.timer ;;& $MAIL_HOST) @@ -3329,7 +3563,7 @@ case $HOSTNAME in # note: cronjob "ian" also does some important monitoring # todo: this will sometimes cause an alert because mailtest-check will run # before we have setup network namespace and spamassassin - i /etc/cron.d/mailtest <> /etc/exim4/ignore-sent - done + # Plus addresses we generally want to ignore. + u /etc/exim4/ignore-sent </usr/local/bin/send-test-forward <<'EOF' #!/bin/bash