X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=mail-setup;h=b3cb092539fc6b6ccd079c0c102ce74980a77d0f;hb=602a1874cc11a7d371890cdae4c0dc982267ea89;hp=a026f069efa4e1217a3e5d2245efc82fb047e83a;hpb=4b3f043829a57215e1251122a8ab0019b717ca8d;p=distro-setup diff --git a/mail-setup b/mail-setup index a026f06..b3cb092 100755 --- a/mail-setup +++ b/mail-setup @@ -3,7 +3,8 @@ # Copyright (C) 2019 Ian Kelling # SPDX-License-Identifier: AGPL-3.0-or-later -# todo: setup a logrotate for /var/log/mymain and mypanic +# todo: max line length macro changed in t11. look into it +# todo: check that all macros we use are still valid in t11 # todo: setup an alert for bouncing test emails. @@ -15,11 +16,13 @@ # todo: handle errors like this: # Mar 02 12:44:26 kw systemd[1]: exim4.service: Found left-over process 68210 (exim4) in control group while starting unit. Ignoring. # Mar 02 12:44:26 kw systemd[1]: This usually indicates unclean termination of a previous run, or service implementation deficiencies. +#eg: on eggs, on may 1st, ps grep for exim, 2 daemons running. 1 leftover from a month ago +#Debian-+ 1954 1 0 36231 11560 4 Apr02 ? 00:40:25 /usr/sbin/exim4 -bd -q30m +#Debian-+ 23058 1954 0 36821 10564 0 20:38 ? 00:00:00 /usr/sbin/exim4 -bd -q30m # todo: harden dovecot. need to do some research. one way is for it to only listen on a wireguard vpn interface, so only clients that are on the vpn can access it. # todo: consider hardening cups listening on 0.0.0.0 # todo: stop/disable local apache, and rpc.mountd, and kdeconnect when not in use. -# todo: check that spamd and unbound only listen locally. # todo: hosts should only allow external mail that is authed and # destined for backup route. it is a minor issue since traffic is @@ -31,10 +34,6 @@ # todo: run mailping test after running, or otherwise # clear out terminal alert -# todo: on bk, dont send email if mailvpn is not up - -# todo: mailtest-check should check on bk too - # todo: disable postgrey # todo: in testforward-check, we should also look @@ -293,7 +292,8 @@ i() { # install file local base="${dest##*/}" local dir="${dest%/*}" if [[ $dir != "$base" ]]; then - mkdir -p ${dest%/*} + # dest has a directory component + mkdir -p "$dir" fi ir=false # i result tmpdir=$(mktemp -d) @@ -349,7 +349,6 @@ stopifactive() { mxhost=mx.iankelling.org mxport=587 -forward=$u@$mxhost # old setup. left as comment for example # mxhost=mail.messagingengine.com @@ -392,6 +391,7 @@ EOF fi # light version of exim does not have sasl auth support. +# note: for bitfolk hosts, unbound has important config with conflink. pi-nostart exim4 exim4-daemon-heavy spamassassin unbound clamav-daemon wireguard # note: pyzor debian readme says you need to run some initialization command @@ -462,7 +462,7 @@ m usermod -a -G Debian-exim clamav i /etc/systemd/system/clamav-daemon.service.d/fix.conf </etc/exim4/conf.d/retry/17_retry <<'EOF' # Retry fast for my own domains -iankelling.org * F,1d,10m;F,14d,1h -amnimal.ninja * F,1d,10m;F,14d,1h -expertpathologyreview.com * F,1d,10m;F,14d,1h -je.b8.nz * F,1d,10m;F,14d,1h -zroe.org * F,1d,10m;F,14d,1h +iankelling.org * F,1d,4m;F,14d,1h +amnimal.ninja * F,1d,4m;F,14d,1h +expertpathologyreview.com * F,1d,4m;F,14d,1h +je.b8.nz * F,1d,4m;F,14d,1h +zroe.org * F,1d,4m;F,14d,1h eximbackup.b8.nz * F,1d,4m;F,14d,1h # The spec says the target domain will be used for temporary host errors, @@ -1092,6 +1143,13 @@ defaultnn.b8.nz * F,1d,4m;F,14d,1h mx.iankelling.org * F,1d,4m;F,14d,1h bk.b8.nz * F,1d,4m;F,14d,1h eggs.gnu.org * F,1d,4m;F,14d,1h +fencepost.gnu.org * F,1d,4m;F,14d,1h + +# afaik our retry doesnt need this, but just using everything +mx.amnimal.ninja * F,1d,4m;F,14d,1h +mx.expertpathologyreview.com * F,1d,4m;F,14d,1h + + mail.fsf.org * F,1d,15m;F,14d,1h EOF @@ -1106,6 +1164,22 @@ cat >/etc/exim4/conf.d/main/000_local2 </etc/exim4/conf.d/transport/11_iank <<'EOF' +# This unsets the default macro defined in on t11 in +# /etc/exim4/conf.d/transport/10_exim4-config_transport-macros +# It seems like a very odd choice that this has become +# the default in t11. Normal smarthost clients use username/password +# auth. Oh well. +REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS == +EOF + cat >/etc/exim4/conf.d/main/000_local <<'EOF' MAIN_TLS_ENABLE = true @@ -1140,13 +1214,17 @@ smtp_accept_queue_per_connection = 500 DKIM_CANON = relaxed DKIM_SELECTOR = li -# from comments in +# From comments in # https://debian-administration.org/article/718/DKIM-signing_outgoing_mail_with_exim4 # and its best for this to align https://tools.ietf.org/html/rfc7489#page-8 # There could be some circumstance when the # from: isnt our domain, but the envelope sender is # and so still want to sign, but I cant think of any case. -DKIM_DOMAIN = ${lc:${domain:$rh_from:}} +#DKIM_DOMAIN = ${lc:${domain:$rh_from:}} +# In t11, we cant do the above anymore because this is tainted data used in a file lookup. +# /usr/share/doc/exim4/NEWS.Debian.gz suggests to use lookups to untaint data. +DKIM_DOMAIN = ${lookup {${domain:$rh_from:}}lsearch,ret=key{/etc/exim4/conf.d/my-dkim-domains}} + # The file is based on the outgoing domain-name in the from-header. # sign if key exists DKIM_PRIVATE_KEY = ${if exists{/etc/exim4/${dkim_domain}-private.pem} {/etc/exim4/${dkim_domain}-private.pem}} @@ -1160,17 +1238,17 @@ DKIM_SIGN_HEADERS = mime-version:in-reply-to:references:from:date:subject:to domainlist local_hostnames = ! je.b8.nz : ! bk.b8.nz : *.b8.nz : b8.nz -hostlist iank_trusted = <; \\ +hostlist iank_trusted = <; \ # veth0 -10.173.8.1 ; \\ +10.173.8.1 ; \ # li li_ip6 -72.14.176.105 ; 2600:3c00::f03c:91ff:fe6d:baf8 ; \\ +72.14.176.105 ; 2600:3c00::f03c:91ff:fe6d:baf8 ; \ # li_vpn_net li_vpn_net_ip6s -10.8.0.0/24; 2600:3c00:e000:280::/64 ; 2600:3c00:e002:3800::/56 ; \\ +10.8.0.0/24; 2600:3c00:e000:280::/64 ; 2600:3c00:e002:3800::/56 ; \ # bk bk_ip6 -85.119.83.50 ; 2001:ba8:1f1:f0c9::2 ; \\ +85.119.83.50 ; 2001:ba8:1f1:f0c9::2 ; \ # je je_ipv6 -85.119.82.128 ; 2001:ba8:1f1:f09d::2 ; \\ +85.119.82.128 ; 2001:ba8:1f1:f09d::2 ; \ # fsf_mit_net fsf_mit_net_ip6 fsf_net fsf_net_ip6 fsf_office_net 18.4.89.0/24 ; 2603:3005:71a:2e00::/64 ; 209.51.188.0/24 ; 2001:470:142::/48 ; 74.94.156.208/28 @@ -1186,6 +1264,17 @@ delay_warning_condition = ${if or {\ } {no}{yes}} +# enable 587 in addition to the default 25, so that +# i can send mail where port 25 is firewalled by isp +daemon_smtp_ports = 25 : 587 +# default of 25, can get stuck when catching up on mail +smtp_accept_max = 400 +smtp_accept_reserve = 100 +smtp_reserve_hosts = +iank_trusted + +# Rules that make receiving more liberal should be on backup hosts +# so that we dont reject mail accepted by MAIL_HOST +LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE = /etc/exim4/conf.d/local_deny_exceptions_acl EOF rm -fv /etc/exim4/rcpt_local_acl # old path @@ -1206,6 +1295,7 @@ accept EOF rm -fv /etc/exim4/data_local_acl # old path + i /etc/exim4/conf.d/data_local_acl <<'EOF' # Except for the "condition =", this was # a comment in the check_data acl. The comment about this not @@ -1224,6 +1314,8 @@ warn warn !hosts = +iank_trusted + # Smarthosts connect with residential ips and thus get flagged as spam if we do a spam check. + !authenticated = plain_server:login_server condition = ${if < {$message_size}{5000K}} spam = Debian-exim:true add_header = X-Spam_score_int: $spam_score_int @@ -1232,11 +1324,6 @@ warn add_header = X-Spam_report: $spam_report add_header = X-Spam_action: $spam_action -warn - condition = ${if def:malware_name} - remove_header = Subject: - add_header = Subject: [Clamav warning: $malware_name] $h_subject - log_message = heuristic malware warning: $malware_name #accept # spf = pass:fail:softfail:none:neutral:permerror:temperror @@ -1495,7 +1582,7 @@ EOF # disable power management feature, set to 240 min sync interval, # so it shouldn't be bad. - # davdroid from f-druid. + # davx^5 from f-droid # login with url and user name # url https://cal.iankelling.org/ian # username ian @@ -1602,7 +1689,7 @@ EOF cat <<'EOF' # https://ssl-config.mozilla.org ssl = required -# this is the same as the certbot list, in my cert cronjob, I check if that has changed upstream. +# this is the same as the certbot list, i check changes in /a/bin/ds/filesystem/usr/local/bin/check-lets-encrypt-ssl-settings ssl_cipher_list = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384 ssl_protocols = TLSv1.2 ssl_prefer_server_ciphers = no @@ -1613,7 +1700,7 @@ protocol lmtp { mail_plugins = $mail_plugins sieve } EOF - if dpkg --compare-versions $(dpkg-query -f='${Version}\n' --show dovecot-core) ge 1:2.3; then + if dpkg --compare-versions "$(dpkg-query -f='${Version}\n' --show dovecot-core)" ge 1:2.3; then cat <config.php - m rm -f tmp.php + e running php tmp.php + php tmp.php >config.php + # leave in place for debugging + #m rm -f tmp.php m sudo -u www-data php $ncdir/occ maintenance:update:htaccess list=$(sudo -u www-data php $ncdir/occ --output=json_pretty app:list) # user_external not compaible with nc 23 @@ -2297,22 +2386,39 @@ EOF systemctl enable --now $ncbase.timer i /usr/local/bin/ncup <<'EOFOUTER' #!/bin/bash -if ! test "$BASH_VERSION"; then echo "error: shell is not bash" >&2; exit 1; fi -shopt -s inherit_errexit 2>/dev/null ||: # ignore fail in bash < 4.4 -set -eE -o pipefail -trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" exit status: $?, PIPESTATUS: ${PIPESTATUS[*]}" >&2' ERR -ncbase=$1 -if ! php /var/www/$ncbase/updater/updater.phar -n; then +source /usr/local/lib/err + +m() { printf "%s\n" "$*"; "$@"; } +err-cleanup() { echo failed nextcloud update for $ncbase >&2 - /sbin/exim -t <>/etc/exim4/conf.d/main/000_local <>/etc/exim4/update-exim4.conf.conf <>/etc/myexim4/conf.d/main/000_local-nn <<'EOF' + m rsync -ra --delete --delete-excluded --exclude=/conf.d/main/000_local-nn /etc/exim4/ /etc/myexim4 + cat >>/etc/myexim4/conf.d/main/000_local <<'EOF' # this makes it easier to see which exim is doing what log_file_path = /var/log/exim4/my%s EOF + + + + cat >/etc/logrotate.d/myexim <<'EOF' +/var/log/exim4/mymain /var/log/exim4/myreject { + daily + missingok + rotate 1000 + delaycompress + notifempty + nocreate +} +/var/log/exim4/mypanic { + size 10M + missingok + rotate 10 + compress + delaycompress + notifempty + nocreate +} +EOF + # If we ever wanted to have a separate spool, # we could do it like this. # cat >>/etc/exim4/conf.d/main/000_local-nn <<'EOF' @@ -3069,6 +3215,12 @@ if $reload; then m systemctl daemon-reload fi +# checking bhost_t is redundant, but could help us catch errors. +if $bhost_t || [[ -e /etc/wireguard/wghole.conf ]]; then + # todo: in mail-setup, we have a static list of backup hosts, not *y + m systemctl --now enable wg-quick@wghole +fi + sysd-prom-fail-install epanicclean m systemctl --now enable epanicclean @@ -3127,12 +3279,19 @@ case $HOSTNAME in $MAIL_HOST) # < 2.1 (eg: in t9), uses a different data format which required manual # migration. dont start if we are running an old version. - if dpkg --compare-versions $(dpkg -s radicale | awk '$1 == "Version:" { print $2 }') ge 2.1; then + if dpkg --compare-versions "$(dpkg -s radicale | awk '$1 == "Version:" { print $2 }')" ge 2.1; then m systemctl --now enable radicale fi ;;& esac +# for debugging dns issues +case $HOSTNAME in + je|bk) + systemctl enable --now logrotate-fast.timer + ;; +esac + # last use of $reload happens in previous block rm -f /var/local/mail-setup-reload @@ -3173,47 +3332,75 @@ case $HOSTNAME in # note: cronjob "ian" also does some important monitoring # todo: this will sometimes cause an alert because mailtest-check will run # before we have setup network namespace and spamassassin - cat >/etc/cron.d/mailtest <>/etc/cron.d/mailtest < /etc/exim4/ignore-sent - for t in ${test_tos[@]:1}; do - test_to+=", $t" + rm -f /etc/exim4/ignore-sent + for t in ${test_tos[@]}; do echo $t >> /etc/exim4/ignore-sent done + cat >/usr/local/bin/send-test-forward <<'EOF' #!/bin/bash +# we remove from the queue older than 4.3 minutes since we send every 5 minutes. olds=( $(/usr/sbin/exiqgrep -o 260 -i -r '^(testignore@(iankelling\.org|zroe\.org|expertpathologyreview\.com|amnimal\.ninja|je\.b8\.nz)|jtuttle@gnu\.org)$') ) @@ -3222,8 +3409,19 @@ if (( ${#olds[@]} )); then fi EOF for test_from in ${test_froms[@]}; do + + test_to=${test_tos[0]} + for t in ${test_tos[@]:1}; do + test_to+=", $t" + done + case $test_from in + testignore@expertpathologyreview.com) + test_to=testignore@zroe.org + ;; + esac + cat >>/usr/local/bin/send-test-forward <