X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=ffs;h=d63668b6e45b3736e479b37ba1851f32351b9df4;hb=989554cab0d0c59d1aab20496ba9550acd17e6e6;hp=4ffb0a0f6e184b23acba9108e1821247c7498b69;hpb=3342374657bd712f14cd772378b23d2bca3382cb;p=distro-setup

diff --git a/ffs b/ffs
index 4ffb0a0..d63668b 100755
--- a/ffs
+++ b/ffs
@@ -22,12 +22,9 @@
 
 # ffs = ffmpeg stream
 
-# todo: learn to start working in one corner of the screen.
-
-# potential improvement: it might be nice that we could have a tall terminal bug only use
+# potential improvement: it might be nice that we could have a tall terminal but only use
 # the top half for a 1080p stream, this is how:
 # https://superuser.com/questions/1106674/how-to-add-blank-lines-above-the-bottom-in-terminal
-#
 
 
 if ! test "$BASH_VERSION"; then echo "error: shell is not bash" >&2; exit 1; fi
@@ -37,14 +34,16 @@ trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" exit status: $?, PIPESTATUS: ${P
 
 usage() {
   cat <<EOF
-Usage: ${0##*/} [OPTIONS] [sysops|tech|staff]
-3 mountpoints: fsf-sysops (default, public), fsf (all staff), fsf-tech (tech team)
+Usage: ${0##*/} [OPTIONS] [sysops|tech|staff|test]
+
+arg is icecast mountpoint suffix, except staff removes suffix.
 
 -d    debug.
 -r RESOLUTION_TYPE
    full: full screen even high resolution.
    tall (default): half screen.
    quarter: self evident
+-l   loud/listen. Start unmuted. Usually for testing.
 -u    Undelayed. Removes 5 second video delay, and about 4 second audio delay.
 -w    do not launch watch of stream
 
@@ -70,9 +69,10 @@ debug=false
 delay=true
 loglevel=fatal
 watch=true
+volume=0
 fullscreen=false
 tall=true
-temp=$(getopt -l help hdr:uw "$@") || usage 1
+temp=$(getopt -l help hdlr:uw "$@") || usage 1
 eval set -- "$temp"
 while true; do
   case $1 in
@@ -82,6 +82,9 @@ while true; do
       loglevel=info
       ffp_args+=(-d)
       ;;
+    -l)
+      volume=1
+      ;;
     -r)
       case $2 in
         tall)
@@ -113,17 +116,24 @@ while true; do
 done
 
 mount_suffix=-sysops
-case $1 in
-  sysops|tech)
-    mount_suffix=-$1
-    ;;&
-  tech)
-    delay=false
-    ;;
-  staff)
-    mount_suffix=
-    ;;
-esac
+if [[ $1 ]]; then
+  case $1 in
+    sysops|tech)
+      mount_suffix=-$1
+      ;;&
+    tech)
+      delay=false
+      ;;
+    staff)
+      mount_suffix=
+      ;;
+    *)
+      echo "error: unexpected \$1: $1" >&2
+      exit 1
+      ;;
+  esac
+  ffp_args+=($1)
+fi
 
 if $delay; then
   # 2500 gets us around a 4 second delay, up from 1.5s.
@@ -133,12 +143,22 @@ fi
 
 ##### end command line parsing ########
 
-host=live.iankelling.org:8000
-if ip n show 10.2.0.1 | grep . &>/dev/null && \
-    [[ $(dig +timeout=1 +short @10.2.0.1 -x 10.2.0.2 2>&1 ||:) == kd.b8.nz. ]]; then
+host=live.iankelling.org:8443
+live_host=$(dig +timeout=1 +short @iankelling.org live.iankelling.org)
+vps_host=$(dig +timeout=1 +short iankelling.org)
+if [[ $live_host != "$vps_host" ]] &&  ip n show 10.2.0.1 | grep . &>/dev/null && \
+     [[ $(dig +timeout=1 +short @10.2.0.1 -x 10.2.0.2 2>&1 ||:) == kd.b8.nz. ]]; then
   host=127.0.0.1:8000
+else
+  find_prefix="ssh live.iankelling.org"
 fi
 
+if $find_prefix find /var/icecast -type f | grep .; then
+  echo "warning: suggest clearing /var/icecast with icrmr or moving files. sleeping for 4 seconds"
+  sleep 4
+fi
+
+
 pass=$(sed -n 's/ *<source-password>\([^<]*\).*/\1/p' /p/c/icecast.xml)
 
 
@@ -166,7 +186,14 @@ else
   stream_res=$primary_res
 fi
 
-framerate=8
+# for 1080p, default 256k is poor quality. 500 is ok. 1500 is a bit
+# better, so go with that.  Also, that is about 2x what is recommended
+# in https://livekit.io/webrtc/bitrate-guide (our framerate is lower).
+
+bitrate=$(( ( ${stream_res/x/*} ) / 1380 ))
+
+# 8 seems fine. be conservative by going a bit higher.
+framerate=10
 keyframe_interval=$((framerate * 2))
 
 # Monitor of default sink.
@@ -230,7 +257,7 @@ opts=(
   #
   # man page say zmq url default includes "localhost", but specifying a
   # localhost url caused an error for me.
-  -filter_complex "[0]azmq,volume=precision=fixed: volume=0 [vol0];
+  -filter_complex "[0]azmq,volume=precision=fixed: volume=$volume [vol0];
 [1]azmq='b=tcp\://127.0.0.1\:5556',volume=precision=fixed: volume=0 [vol1];
 [vol0][vol1] amerge=inputs=2;
 [2]zmq='b=tcp\://127.0.0.1\:5557',drawbox=color=0x262626,drawtext=fontsize=90: fontcolor=beige: x=40: y=40: text=''${delay_arg}[out]"
@@ -253,8 +280,7 @@ opts=(
   -vcodec libvpx
   -g $keyframe_interval
   -quality realtime
-  # for 1080p, default 256k is poor quality. 500 is ok. 1500 is a bit better.
-  -b:v 1500k
+  -b:v ${bitrate}k
   -threads 2
   -error-resilient 1
 
@@ -333,7 +359,7 @@ if [[ $mount_suffix == -sysops ]]; then
   touch $HOME/.iank-stream-on
 fi
 
-echo true >$HOME/.iank-stream-muted
+echo $volume >$HOME/.iank-stream-muted
 
 ffmpeg "${opts[@]}" &
 if $watch; then
@@ -344,8 +370,6 @@ if $watch; then
   rm -f $HOME/.iank-stream-on
 fi
 
-
-
 ### begin background/development docs ###
 
 # zmq vs stdin commands: