X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=fai%2Fconfig%2Fhooks%2Fpartition.demohost;fp=fai%2Fconfig%2Fhooks%2Fpartition.demohost;h=0000000000000000000000000000000000000000;hb=eae06d9028e4e70a211afef4a73b971067203da1;hp=2adaad9a48d41578f37df46c5365d8a945a57084;hpb=bba7eb6d061e8a98ffb744acb957cb9f725996cb;p=automated-distro-installer

diff --git a/fai/config/hooks/partition.demohost b/fai/config/hooks/partition.demohost
deleted file mode 100755
index 2adaad9..0000000
--- a/fai/config/hooks/partition.demohost
+++ /dev/null
@@ -1,135 +0,0 @@
-#!/bin/bash -x
-
-set -eE -o pipefail
-trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?"' ERR
-
-# # fai's setup-storage won't do btrfs on luks,
-# # so we do it ourself :)
-skiptask partition
-
-repartition=false
-
-# keyfiles generated like:
-# head -c 2048 /dev/urandom | od | s dd of=/q/root/luks/host-demohost
-luks_dir=/var/lib/fai/config/distro-install-common/luks
-
-letters=(a)
-
-if ifclass VM; then
-    d=/dev/vd
-    letters=(a b)
-else
-    d=/dev/sd
-fi
-devs=()
-for letter in ${letters[@]}; do
-    devs+=($d$letter)
-done
-
-
-boot_end=504
-
-! ifclass tp || letters=(a b)
-
-md() { ((${#letters[@]} > 1)); }
-
-if md; then
-    # if partition with md0, then reboot into the installer,
-    # it becomes md127. So might as well start with 127 for simplicity.
-    crypt=md127
-else
-    crypt=${d##/dev/}a3
-fi
-
-
-
-# 1.5 x based on https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Installation_Guide/sect-disk-partitioning-setup-x86.html#sect-custom-partitioning-x86
-swap_end=$(( $(grep ^MemTotal: /proc/meminfo| awk '{print $2}') * 3/(${#letters[@]} * 2 ) / 1000 + boot_end ))MiB
-
-shopt -s nullglob
-if $repartition; then
-    mkdir -p /tmp/fai
-    for dev in ${devs[@]}; do
-        for x in /dev/md*; do [[ -d $x ]] || mdadm --stop $x; done
-        for x in $dev[0-9]; do wipefs -a $x; done
-        parted -s $dev mklabel gpt
-        # gpt ubuntu cloud image uses ~4. fai uses 1 MiB. ehh, i'll do 4.
-        # also, using MB instead of MiB causes complains about alignment.
-        parted -s $dev mkpart primary "ext3" 4MB ${boot_end}MiB
-        parted -s $dev set 1 boot on
-        parted -s $dev mkpart primary "linux-swap" ${boot_end}MiB $swap_end
-        parted -s -- $dev mkpart primary "" $swap_end -0
-        parted -s $dev set 3 raid on
-        parted -s $dev mkpart primary "" 1MiB 4MiB
-        parted -s $dev set 4 bios_grub on
-        # the mkfs failed randomly on a vm, so I threw a sleep in here.
-        sleep .1
-        mkfs.ext4 -F ${dev}1
-    done
-    if md; then
-        yes | mdadm --create /dev/$crypt --level=raid0 --force --run \
-                    --raid-devices=${#devs[@]} ${devs[@]/%/3} || [[ $? == 141 ]]
-    fi
-
-    yes YES | cryptsetup luksFormat /dev/$crypt $luks_dir/host-$HOSTNAME \
-                         -c aes-cbc-essiv:sha256 -s 256 || [[ $? == 141 ]]
-    yes $(cat $luks_dir/traci) | \
-        cryptsetup luksAddKey --key-file \
-                   $luks_dir/host-$HOSTNAME /dev/$crypt || [[ $? == 141 ]]
-    # this would remove the keyfile. we will do that manually later.
-    #    yes 'test' | cryptsetup luksRemoveKey /dev/... \
-        #                            /key/file || [[ $? == 141 ]]
-    cryptsetup luksOpen /dev/$crypt crypt_dev_$crypt --key-file \
-               $luks_dir/host-$HOSTNAME
-    parted ${devs[0]} set 1 boot on
-    mkfs.btrfs -f /dev/mapper/crypt_dev_$crypt
-    mount /dev/mapper/crypt_dev_$crypt /mnt
-    cd /mnt
-    btrfs subvolume create a
-    btrfs subvolume create root
-    btrfs subvolume set-default $(btrfs subvolume list . | grep 'root$' | awk '{print $2}') .
-    cd /
-    umount /mnt
-else
-    for dev in ${devs[@]}; do
-        mkfs.ext4 -F ${dev}1
-    done
-    yes $(cat $luks_dir/traci) | \
-        cryptsetup luksOpen /dev/$crypt crypt_dev_$crypt || [[ $? == 141 ]]
-    sleep 1
-    mount -o subvolid=0 /dev/mapper/crypt_dev_$crypt /mnt
-    # systemd creates subvolumes we want to delete.
-    s=($(btrfs subvolume list --sort=-path /mnt |
-                sed -rn 's#^.*path\s*(root/\S+)\s*$#\1#p'))
-    for subvol in ${s[@]}; do btrfs subvolume delete /mnt/$subvol; done
-    btrfs subvolume set-default 0 /mnt
-    btrfs subvolume delete /mnt/root
-    btrfs subvolume create /mnt/root
-    btrfs subvolume set-default $(btrfs subvolume list /mnt | grep 'root$' | awk '{print $2}') /mnt
-    umount /mnt
-fi
-
-cat > /tmp/fai/crypttab <<EOF
-crypt_dev_$crypt  /dev/$crypt  none  keyscript=/root/keyscript,discard,luks
-EOF
-
-for dev in ${devs[@]}; do
-    cat >> /tmp/fai/crypttab <<EOF
-swap ${dev}2  /dev/urandom  swap,cipher=aes-xts-plain64,size=256,hash=ripemd160
-EOF
-done
-
-# this is duplicated in arch-init
-cat > /tmp/fai/fstab <<EOF
-/dev/mapper/crypt_dev_$crypt  /  btrfs  noatime,subvol=/root  0 0
-/dev/mapper/crypt_dev_$crypt  /a  btrfs  noatime,subvol=/a  0 0
-${devs[0]}1  /boot  ext4  noatime  0 2
-EOF
-
-
-cat >/tmp/fai/disk_var.sh <<EOF
-ROOT_PARTITION=\${ROOT_PARTITION:-/dev/mapper/crypt_dev_$crypt}
-BOOT_PARTITION=\${BOOT_PARTITION:-${devs[0]}1}
-BOOT_DEVICE=\${BOOT_DEVICE:-"${devs[0]}"}
-SWAPLIST=\${SWAPLIST:-"${devs[@]/%/2}"}
-EOF