X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=distro-end;h=660d556ea2363d9220ab9859c09fc3d2b4403f97;hb=65351382939fa95fb1e05d7d83eb58d27c3c6133;hp=a30963f5d0e1240db3c5eff77dfbbecba08cbe71;hpb=e688da727d2f4620e52a26e77f190c65d6627e7e;p=distro-setup
diff --git a/distro-end b/distro-end
index a30963f..660d556 100755
--- a/distro-end
+++ b/distro-end
@@ -1,170 +1,1139 @@
#!/bin/bash -l
# Copyright (C) 2016 Ian Kelling
-# This program is under GPL v. 3 or later, see
-set -eE -o pipefail
-trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?"' ERR
+
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+errcatch
set -x
exec &> >(sudo tee -a /var/log/distro-end)
echo "$0: $(date): starting now)"
+src="${BASH_SOURCE%/*}"
+
+source $src/pkgs
+
+# see example of usage to understand.
end_msg() {
- = local y
+ local y
IFS= read -r -d '' y ||:
end_msg_var+="$y"
}
+spa() { # simple package add
+ simple_packages+=($@)
+}
+
distro=$(distro-name)
pending_reboot=false
+sed="sed --follow-symlinks"
# template
case $distro in
esac
pup
+if isdeb; then
+ pi aptitude
+fi
-# universal packages
-simple_packages=(
- bwm-ng
- chromium
- duplicity
- evince
- fdupes
- filelight
- gdb
- gnome-screenshot
- mailutils
- meld
- mpv
- nmon
- offlineimap
- p7zip
- paprefs
- pavucontrol
- pianobar
- pidgin
- rdiff-backup
- slock
- smartmontools
- squashfs-tools
- tcpdump
- transmission-remote-gtk
- tree
- vim
-)
+simple_packages=(${p3[@]})
+
+case $HOSTNAME in
+ lj|li) : ;;
+ *)
+ simple_packages+=(${p4[@]})
+ spa $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}')
+ ;;
+esac
-spa() { # simple package add
- simple_packages+=($@)
-}
+########### begin section including li ################
+
+conflink
case $distro in
- debian) pi curl ;;
+ arch)
+ # ubuntu 14.04 uses b-cron,
+ # but its not maintained in arch.
+ # of the ones in the main repos, cronie is only one maintained.
+ # fcron appears abandoned software.
+ pi cronie
+ sgo cronie
+ ;;
+ *) : ;; # other distros come with cron.
+esac
+
+
+
+case $distro in
+ *) pi at ;;&
+ arch) sgo atd ;;
+esac
+
+
+case $distro in
+ debian|trisquel|ubuntu) pi curl;;
arch) : ;;
# fedora: unknown
esac
case $distro in
- arch) pi syncthing ;;
- ubuntu|debian)
- # google led me here:
- # https://apt.syncthing.net/
- curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
- s="deb http://apt.syncthing.net/ syncthing release"
- if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
- echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
- p update
- fi
- pi syncthing
+ # tk for gitk
+ arch) spa git tk ;;
+ *) spa git ;;
+esac
+
+case $distro in
+ arch) spa the_silver_searcher ;;
+ debian|trisquel|ubuntu) spa silversearcher-ag ;;
+ # fedora unknown
+esac
+
+case $distro in
+ debian|trisquel|ubuntu) spa ntp;;
+ arch)
+ pi ntp
+ sgo ntpd
;;
+ # others unknown
esac
-# installed via f-droid
-# top right, actions, device id
-#
-# for installing on a remote comp:
-# ssh -L 8384:localhost:8384 -N frodo
-# went to http://localhost:8384/
-#
-# add folder to sync phone,
-# staggered file versioning would be my normal choice, but choose
-# trash can versioning for sake of space on phone, with
-# clean out after 7 days.
-#
-# did ser syncthing@ian start
-# then on phone, add device, hit bar code icon,
-# install bar code scanner.
-# things with no equivalent in other distros:
+# no equivalent in other distros:
case $distro in
- debian|ubuntu)
- # for gui bug reporting
- spa python-vte
- pi apt-file aptitude
- s apt-file update
+ debian|trisquel|ubuntu)
+ pi aptitude
+ if ! dpkg -s apt-file &>/dev/null; then
+ # this condition is just a speed optimization
+ pi apt-file
+ s apt-file update
+ fi
# for debconf-get-selections
spa debconf-utils
;;
esac
-####### misc packages ###########
+case $distro in
+ arch|debian|trisquel|ubuntu)
+ spa bash-completion
+ ;;
+ # others unknown
+esac
+
+
+
+
+# disable motd junk.
case $distro in
- ubuntu|debian)
- spa spacefm-gtk3 ;;
- arch)
- spa spacefm ;;
+ debian)
+ # allows me to pipe with ssh -t, and gets rid of spam
+ # http://forums.debian.net/viewtopic.php?f=5&t=85822
+ # i'd rather disable the service than comment the init file
+ # this says disabling the service, it will still get restarted
+ # but this script doesn't do anything on restart, so it should be fine
+ s dd of=/var/run/motd.dynamic if=/dev/null
+ # stretch doesn't have initscripts pkg installed by default
+ if [[ $(debian-codename) == jessie ]]; then
+ s update-rc.d motd disable
+ fi
+ ;;
+ trisquel|ubuntu)
+ # this isn't a complete solution. It still shows me when updates are available,
+ # but it's no big deal.
+ s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
+ ;;
+esac
+
+# automatic updates
+# reference:
+# https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
+# /etc/cron.daily/apt calls unattended-upgrades
+# /usr/share/doc/unattended-upgrades# cat README.md
+# /etc/apt/apt.conf.d/50unattended-upgrades
+if isdebian; then
+ setup-debian-auto-update
+fi
+
+# we've got a few dependencies later on, so install them now.
+pi eatmydata; PI_PREFIX=eatmydata
+pi "${simple_packages[@]}"
+simple_packages=()
+
+
+### begin docker install ####
+
+if isdeb; then
+ # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
+ pi software-properties-common apt-transport-https
+ curl -fsSL https://download.docker.com/linux/$(distro-name-compat)/gpg | sudo apt-key add -
+ sudo add-apt-repository \
+ "deb [arch=amd64] https://download.docker.com/linux/$(distro-name-compat) \
+ $(debian-codename-compat) \
+ stable"
+ p update
+ pi docker-ce
+ sgo docker
+ # other distros unknown
+fi
+### end docker install ####
+
+
+### begin certbot install ###
+case $distro in
+ debian)
+ # note, need python-certbot-nginx for nginx, but it depends on nginx,
+ # and I'm not installing nginx by default right now.
+ # note python-certbot-apache is in suggests, but so is a doc package that brought in xorg
+ if [[ $(debian-codename) == jessie ]]; then
+ pi -t jessie-backports certbot python-certbot-apache
+ else
+ pi certbot python-certbot-apache
+ fi
+ ;;
+ trisquel|ubuntu)
+ # not packaged in xenial or flidas
+ pi software-properties-common
+ # this fails with:
+ #
+ # gpg: key 75BCA694: public key "Launchpad PPA for certbot" imported
+ # gpg: Total number processed: 1
+ # gpg: imported: 1
+ # gpg: no valid OpenPGP data found.
+ # Failed to add key.
+ #
+ # but it seems to work fine, perhaps it's only failing on the second run.
+ s add-apt-repository -y ppa:certbot/certbot ||:
+ p update
+ pi python-certbot-apache
+ ;;
+ # todo: other distros unknown
+esac
+# make a version of the certbot timer that emails me.
+x=/systemd/system/certbot
+$sed -r -f - /lib$x.timer <<'EOF' |s dd of=/etc${x}mail.timer
+s,^Description.*,\0 mail version,
+EOF
+$sed -r -f - /lib$x.service <<'EOF' |s dd of=/etc${x}mail.service
+s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
+EOF
+ser daemon-reload
+sgo certbotmail.timer
+### end certbot install ###
+
+
+# dogcam setup
+case $HOSTNAME in
+ lj|li)
+ /a/bin/webcam/install-server
+ ;;
+ kw)
+ /a/bin/webcam/install-client
+ ;;
+esac
+
+# website setup
+case $HOSTNAME in
+ lj|li)
+
+ case $HOSTNAME in
+ lj) domain=iank.bid; exit 0 ;;
+ li) domain=iankelling.org ;;
+ esac
+ /a/h/setup.sh $domain
+ /a/h/build.rb
+
+ sudo -E /a/bin/mediawiki-setup/mw-setup-script
+
+ pi-nostart mumble-server
+ s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini
+
+ # do certificate to avoid warning about unsigned cert,
+ # which is overkill for my use, but hey, I'm cool, I know
+ # how to do this.
+ web-conf apache2 mumble.iankelling.org
+ s rm -f /etc/apache2/sites-enabled/mumble.iankelling.org
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
+
+ sgo mumble-server
+
+ vpn-server-setup -rd
+ s tee /etc/openvpn/client-config/mail <<'EOF'
+ifconfig-push 10.8.0.4 255.255.255.0
+EOF
+
+ # it\'s strange. docker seems to make the default for forward
+ # be drop, but then I set it to accept and it\'s stuck that way,
+ # I dun know why. But, let\'s make sure we can forward anyways.
+ s DEBIAN_FRONTEND=noninteractive pi iptables-persistent
+ rm /etc/iptables/rules.v6
+ s tee /etc/iptables/rules.v4 <<'EOF'
+*filter
+-A FORWARD -i tun+ -o eth0 -j ACCEPT
+-A FORWARD -i eth0 -o tun+ -j ACCEPT
+COMMIT
+EOF
+
+
+ sudo dd of=/etc/systemd/system/vpnmail.service <
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
+
+
+ ########## begin pump.io setup ##########
+
+ # once pump adds a logrotation script, turn off nologger,
+ # and add
+ # "logfile": "/var/log/pumpio/pumpio.log",
+ #
+ s dd of=/etc/pump.io.json <<'EOF'
+{
+ "secret": "SECRET_REPLACE_ME",
+ "driver": "mongodb",
+ "params": { "dbname": "pumpio" },
+ "noweb": false,
+ "site": "pump.iankelling.org",
+ "owner": "Ian Kelling",
+ "ownerURL": "https://iankelling.org/",
+ "port": 8001,
+ "urlPort": 443,
+ "hostname": "pump.iankelling.org",
+ "nologger": true,
+ "datadir": "/home/pumpio/pumpdata",
+ "enableUploads": true,
+ "debugClient": false,
+ "disableRegistration": true,
+ "noCDN": true,
+ "key": "/home/pumpio/privkey.pem",
+ "cert": "/home/pumpio/fullchain.pem",
+ "address": "localhost",
+ "sockjs": false
+}
+EOF
+ s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
+
+ # stretch node is too old
+ # https://nodejs.org/en/download/package-manager/
+ curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
+ pi nodejs graphicsmagick mongodb
+ cd /home/iank
+ if [[ -e pump.io ]]; then
+ cd pump.io
+ git pull
+ else
+ git clone https://github.com/pump-io/pump.io.git
+ cd pump.io
+ fi
+ # note: doing this or the npm install pump.io as root had problems.
+ npm install
+ npm run build
+ # normally, next command would be
+ # s npm install -g odb
+ # but it\'s this until a bug in pump gets fixed
+ # https://github.com/pump-io/pump.io/issues/1287
+ s npm install -g databank-mongodb@0.19.2
+ if ! getent passwd pumpio &>/dev/null; then
+ s useradd -m -s /bin/false pumpio
+ fi
+ sudo -u pumpio mkdir -p /home/pumpio/pumpdata
+ # for testing browser when only listening to localhost,
+ # in the pump.io.json, set hostname localhost, urlPort 5233
+ #ssh -L 5233:localhost:5233 li
+
+ s mkdir -p /var/log/pumpio/
+ s chown pumpio:pumpio /var/log/pumpio/
+
+ web-conf - apache2 pump.iankelling.org <<'EOF'
+# currently a bug in pump that we cant terminate ssl
+ SSLProxyEngine On
+ ProxyPreserveHost On
+ ProxyPass / https://127.0.0.1:8001/
+ ProxyPassReverse / https://127.0.0.1:8001/
+ # i have sockjs disabled per people suggesting that
+ # it won\'t work with apache right now.
+ # not sure if it would work with this,
+ # but afaik, this is pointless atm.
+
+ ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
+ ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
+
+EOF
+
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
+
+ s dd of=/etc/systemd/system/pump.service <<'EOF'
+[Unit]
+Description=pump.io
+After=syslog.target network.target
+
+[Service]
+Type=simple
+User=pumpio
+Group=pumpio
+ExecStart=/home/iank/pump.io/bin/pump
+Environment=NODE_ENV=production
+# failed to find databank-mongodb without this.
+# I just looked at my environment variables took a guess.
+Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo pump
+ ########## end pump.io setup ############
+
+
+ ############# begin setup mastodon ##############
+
+ # main doc is Docker-Guide.md in docs repo
+
+ # I'd like to try gnu social just cuz of gnu, but it's not being
+ # well maintained, for example, simple pull requests
+ # languishing:
+ # https://git.gnu.io/gnu/gnu-social/merge_requests/143
+ # and I submitted my own bugs, basic docs are broken
+ # https://git.gnu.io/gnu/gnu-social/issues/269
+
+ # note, docker required, but we installed it earlier
+
+ # i subscrubed to https://github.com/docker/compose/releases.atom
+ # to see release notes.
+ # i had some problems upgrading. blew things away with
+ # docker-compose down
+ # docker rmi $(docker images -q)
+ # s reboot now
+ # when running docker-compose run, kernel stack traces are printed to the journal.
+ # things seem to succeed, google says nothing, so ignoring them.
+ curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
+ s chmod +x /usr/local/bin/docker-compose
+
+
+ cd ~
+ s rm -rf mastodon
+ i clone https://github.com/tootsuite/mastodon
+ cd mastodon
+ # subbed to atom feed to deal with updates
+ git checkout $(git tag | grep -v rc | tail -n1)
+
+ # per instructions, uncomment redis/postgres persistence in docker-compose.yml
+ sed -i 's/^#//' docker-compose.yml
+
+ cat >.env.production <<'EOF'
+REDIS_HOST=redis
+REDIS_PORT=6379
+DB_HOST=db
+DB_USER=postgres
+DB_NAME=postgres
+DB_PASS=
+DB_PORT=5432
+
+LOCAL_DOMAIN=mast.iankelling.org
+LOCAL_HTTPS=true
+
+SINGLE_USER_MODE=true
+
+SMTP_SERVER=mail.iankelling.org
+SMTP_PORT=25
+SMTP_LOGIN=li
+SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
+SMTP_DOMAIN=mast.iankelling.org
+SMTP_DELIVERY_METHOD=smtp
+EOF
+
+ for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
+ # 1 minute 7 seconds to run this docker command
+ # to generate a secret, and it has ^M chars at the end. wtf. really dumb
+ printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
+ done
+ found=false
+ while read -r domain port pass; do
+ if [[ $domain == mail.iankelling.org ]]; then
+ found=true
+ # remove the username part
+ pass="${pass#*:}"
+ printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
+ break
+ fi
+ done < <(s cat /etc/mailpass)
+ if ! $found; then
+ echo "$0: error, failed to find mailpass domain for mastadon"
+ exit 1
+ fi
+
+ # docker compose makes an interface named like br-8f3e208558f2. we need mail to
+ # get routed to us.
+ if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
+ s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
+ fi
+
+ docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
+ logq docker-compose run --rm web rake db:migrate
+ docker-compose run --rm web rails assets:precompile
+
+ # avatar failed to upload, did
+ # docker logs mastodon_web_1
+ # google lead me to this
+ s chown -R 991:991 public/system
+
+ # docker daemon takes care of starting on boot.
+ docker-compose up -d
+
+ s a2enmod proxy_wstunnel headers
+ web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
+ ProxyPreserveHost On
+ RequestHeader set X-Forwarded-Proto "https"
+ ProxyPass /500.html !
+ ProxyPass /oops.png !
+ ProxyPass /api/v1/streaming/ ws://localhost:4000/
+ ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
+ ErrorDocument 500 /500.html
+ ErrorDocument 501 /500.html
+ ErrorDocument 502 /500.html
+ ErrorDocument 503 /500.html
+ ErrorDocument 504 /500.html
+EOF
+
+
+ ############### !!!!!!!!!!!!!!!!!
+ ############### manual steps:
+
+ # only following 2 people atm, so not bothering to figure out backups
+ # when mastodon has not documented it at all.
+ #
+ # fsf@status.fsf.org
+ # cwebber@toot.cat
+ # dbd@status.fsf.org
+ # johns@status.fsf.org
+
+ # sign in page is at https://mast.iankelling.org/auth/sign_in
+ # register as iank, then
+ # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
+ # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
+
+ ############# end setup mastodon ##############
+
+ # we use nsupdate to update the ip of home
+ pi bind9
+
+ pi znc
+ # znc config generated by doing
+ # znc --makeconf
+ # selected port is also used in erc config
+ # comma separated channel list worked.
+ # while figuring things out, running znc -D for debug in foreground.
+ # to exit and save config:
+ # /msg *status shutdown
+ # configed auth on freenode by following
+ # https://wiki.znc.in/Sasl
+ # created the system service after, and had to do
+ # mv /home/iank/.znc/* /var/lib/znc
+ # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
+ # and made a copy of the config files into /p/c
+ # added LoadModule = log -sanitize to the top level
+ # to get into the web interface,
+ # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
+ # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
+ # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
+ # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
+ # todo: figure out how to make playback in erc happe.n
+ s useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc || [[ $? == 9 ]] # 9 if it exists already
+ chmod 700 /var/lib/znc
+ s chown -R znc:znc /var/lib/znc/config
+ s dd of=/etc/systemd/system/znc.service 2>/dev/null <<'EOF'
+[Unit]
+Description=ZNC, an advanced IRC bouncer
+After=network-online.target
+
+[Service]
+ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
+User=znc
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo znc
+
+ echo "$0: $(date): ending now)"
+ exit 0
+ ;;
esac
+# needed for checkrestart
+if isdeb; then
+ spa debian-goodies
+fi
+
+
+
+########### end section including li/lj ###############
+
+case $distro in
+ debian) spa gnome-session-flashback ;;
+ # flidas is missing dependency gnome-panel. others unknown
+esac
+
+
+
+case $distro in
+ trisquel|ubuntu|debian) spa ack-grep ;;
+ arch|fedora) spa ack ;;
+ # fedora unknown
+esac
+
+
+
+case $distro in
+ debian)
+ pi chromium ;;
+ xenial|ubuntu)
+ wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
+ cat < false,
+'rpc-authentication-required' => false,
+'incomplete-dir' => '/i/k/partial-torrents',
+'incomplete-dir-enabled' => true,
+'download-dir' => '/i/k/torrents',
+"speed-limit-up" => 800,
+"speed-limit-up-enabled" => true,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
+"ratio-limit-enabled" => true,
})) + "\n")
EOF
- sgo transmission-daemon
- ;;
- arch)
- # todo, setup it's config file & daemon
- pi transmission-cli
- ;;
- esac
-fi
+ # make sure its not enabled, not sure if this is needed
+ ser disable transmission-daemon
+ ;;
+ # todo: others unknown
+esac
# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
if ! getent passwd debian-transmission > /dev/null; then
case $distro in
@@ -188,284 +1157,193 @@ if ! getent passwd debian-transmission > /dev/null; then
esac
fi
-# arch had a default config,
-# debian had nothing until you start it.
-# With a little trial an error, here is a minimal config
-# taken from the generated one, plus changes that the
-# settings ui does, without a bunch of ui crap settings.
-#
-# only settings I set were
-# hostname
-# auto-connect
-#
-for f in /home/*; do
- d=$f/.config/transmission-remote-gtk
- u=${f##*/}
- s -u $u mkdir -p $d
- s -u $u dd of=$d/config.json <<'EOF'
-{
- "profiles" : [
- {
- "profile-name" : "Default",
- "hostname" : "frodo",
- "rpc-url-path" : "/transmission/rpc",
- "username" : "",
- "password" : "",
- "auto-connect" : true,
- "ssl" : false,
- "timeout" : 40,
- "retries" : 3,
- "update-active-only" : false,
- "activeonly-fullsync-enabled" : false,
- "activeonly-fullsync-every" : 2,
- "update-interval" : 3,
- "min-update-interval" : 3,
- "session-update-interval" : 60,
- "exec-commands" : [
- ],
- "destinations" : [
- ]
- }
- ],
- "profile-id" : 0,
- "add-options-dialog" : false
-}
-EOF
-done
-case $distro in
- debian|ubuntu)
- pi-nostart openvpn
- # pi-nostart this doesn't seem to be good enough?
- ser disable openvpn@client
- ser disable openvpn
- ;;
- *) pi openvpn ;;
- esac
-
- case $HOSTNAME in
- tp|frodo)
- case $distro in
- debian|ubuntu)
- log=$(mktemp)
- cd /a/opt
- wget -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
- set +e
- s dpkg -i google-chrome-stable_current_amd64.deb &> $log
- code=$?
- set -e
- case $code in
- 1)
- if grep '^dpkg: dependency problems prevent configuration of' \
- $log &>/dev/null; then
- s apt-get -fy install
- else
- exit 1
- fi
- ;;
- 0) : ;;
- *) exit $code
- esac
- ;;
- arch)
- pi google-chrome
- ;;
- esac
- ;;
- esac
+# trisquel 8 = openvpn, debian stretch = openvpn-client
+vpn_ser=openvpn-client
+if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
+ vpn_ser=openvpn
+fi
- case $distro in
- # ubuntu unknown. probably the same as debian, just check if the
- # init scripts come with the package.
- debian)
- # copied from arch, but moved to etc
- s dd of=/etc/systemd/user/synergys.service <<'EOF'
+s dd of=/etc/systemd/system/transmission-daemon-nn.service < /tmp/x
-fi
-
+# btrfs maintenance
+sgo btrfsmaint.timer
+sgo btrfsmaintstop.timer
-######### begin postfix ########
-# based on,http://www.postfix.org/qmgr.8.html and my notes in gnus
-# originally tried moving specific directories under /var/spool/postfix,
-# but postfix didn't like that
-if [[ ! -L /var/spool/postfix ]]; then
- ser stop postfix
- n=/q/postfix-`distro-name``debian-archive`
- if [[ -e $n ]]; then
- echo "$0: warning: $n already exists before we do the link, removing it"
- rm -rf $n
- fi
- s mv /var/spool/postfix $n
- s lnf -T $n /var/spool/postfix
- ser start postfix
- journalctl -n 20 | cat
-fi
+# the wiki backup script from ofswiki.org uses generic paths
+s lnf /p/c/machine_specific/li/mw_vars /root
+s lnf /k/backup/wiki_backup /root
-# This also works instead of ~/.forward
-# s sed -i '/^root/d' /etc/aliases ||:
-#echo "root: $HOSTNAME@bog.mm.st" | s tee -a /etc/aliases
-# this can't be a symlink and has permission restrictions
-# it might work in /etc/aliases, but this seems more proper.
+s cedit /etc/goaccess.conf <<'EOF' || [[ $? == 1 ]]
+# all things found from looking around the default config
+# copied existing NCSA Combined Log Format with Virtual Host, plus %L
+log-format %^:%^ %h %^[%d:%t %^] "%r" %s %b "%R" "%u" %D
+time-format %H:%M:%S
+date-format %d/%b/%Y
+log-file /var/log/apache2/access.log
+color-scheme 2
-if s grep amazonaws /etc/postfix/sasl_passwd &>/dev/null; then
- forward=$HOSTNAME@sallymae.club
-else
- forward=$HOSTNAME@bog.mm.st
-fi
-e $forward > ~/.forward
-e $forward | s tee /root/.forward
-s newaliases
-
-# if I wanted the from address to be renamed and sent to a different address,
-# echo "sdx@localhost development@localhost" | sudo dd of=/etc/postfix/recipient_canonical
-# sudo postmap hash:/etc/postfix/recipient_canonical
-# sudo service postfix reload
-
-
-# i'm assuming mail just won't work on systems without the sasl_passwd.
-postconfin <<'EOF'
-smtp_sasl_auth_enable = yes
-smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
-smtp_sasl_security_options = noanonymous
-smtp_tls_security_level = secure
-message_size_limit = 20480000
-smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
+# tip: copy access.log files to a stretch host directory, then run
+# jessie's goaccess is too old for some options, and it\'s
+# not easily installed from a testing.
+# goaccess --ignore-crawlers -f <(cat *) -a -o html > x.html
EOF
-# ^ I ran into a log file not sending cuz of size. double from 10 to 20 meg limit
-s postmap hash:/etc/postfix/sasl_passwd
-# offlineimap uses this too, it is much easier to use one location than to
-# condition it's config and postfix's config
+
+case $distro in
+ trisquel|ubuntu|debian)
+ # unison-gtk second, i want it to be default, not sure if that works
+ # with spa. note, I used to install from testing repo when using stable,
+ # but it shouldn't be needed since I wrote a script to handle mismatching
+ # compilers.
+ spa unison unison-gtk
+ ;;
+arch)
+ spa unison gtk2
+ ;;
+esac
+
case $distro in
- fedora) s lnf -T ca-certificates.crt /etc/ssl/ca-bundle.trust.crt ;;
- *) :
+ arch)
+ # default is alsa, doesn\'t work with with pianobar
+ s dd of=/etc/libao.conf <<'EOF'
+default_driver=pulse
+EOF
+ ;;
esac
-s service postfix reload
-sgo postfix
+# note, for jessie, it depends on a higher version of btrfs-tools.
+#
+# # disabled due to my patch being in btrbk
+# case $distro in
+# arch|debian|trisquel|ubuntu) pi btrbk ;;
+# # others unknown
+# esac
+cd /a/opt/btrbk
+s make install
+spa pv # for progress bar when running interactively.
+
+# ian: temporarily disabled while hosts are in flux.
+# if [[ $HOSTNAME == tp ]]; then
+# # backup/sync manually on others hosts for now.
+# sgo btrbk.timer
+# # note: to see when it was last run,
+# # ser list-timers
+# fi
+
-############ end postfix #######
case $distro in
- debian|ubuntu) s gpasswd -a ian adm ;; #needed for reading logs
+ debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
esac
# tor
@@ -900,7 +1809,7 @@ EOF
pi nfs-utils
sgo nfs-server
;;
- debian|ubuntu)
+ debian|trisquel|ubuntu)
pi nfs-server
;;
arch)
@@ -911,150 +1820,57 @@ EOF
;;
esac
-if [[ -e /i/video ]]; then
+
+
+
+if [[ $HOSTNAME == frodo ]]; then
# nohide = export filesystems mounted deeper than the export point
# fsid=0 makes this export the "root" export
# not documented in the man page, but this means
# 1. it can be mounted with a shorthand of server:/
# 2. exports that are subdirectories of this one will automatically be mounted
- tu /etc/exports '/i/video 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)'
+ tu /etc/exports <<'EOF'
+/k 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
+EOF
s exportfs -rav
- showmount -e localhost
fi
-# cron
-f=/a/bin/$HOSTNAME-crontab
-if [[ -e $f ]]; then
- $f
-fi
-
e "$end_msg_var"
# persistent virtual machines
-
case $distro in
- debian|ubuntu)
+ debian|trisquel|ubuntu)
pi libosinfo-bin;
;;
esac
+# if I was going to create a persistent vm, i might do it like this:
+# variant=something # from: virt-install --os-variant list
+# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ # -n some_name --import --os-variant $variant --cpu host-model-only
-# distro may not know about win 10 yet.
-variant=win7
-if ! virt-install --os-variant list &>/dev/null; then # we are using a newer virt-install
- for v in 10 8.1 8; do
- if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
- variant=win$v
- break
- fi
- done
-fi
-
-if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
-
- # created account with
- # win10vmian@outlook.com, and easy to remember password
- # win 10 virtio, makes disk way way way faster
- # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
- # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
- # for installing virtio after initial install instead of with initial iso:
- # qemu-img create -f qcow2 fake.qcow2 1G
- # --disk=/a/images/virtio-win.iso,device=cdrom \
- # --disk=/a/images/fake.qcow2,bus=virtio
- # Also,
- # went to device manager, saw 2 pci devices with yellow !,
- # did search for drivers, pick cdrom location, done.
- #
- # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
- # google said there was a control panel option for it, but
- # that turned out to be a lie.
- # Put this in a .bat file and run as administrator to turn off
- # hyberboot which fucks things up.
- # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
- # power settings, turn off display: never
- # run "control userpasswords2", turn on automatic login.
- # note: when changing devices, I just undefine, the create the vm again.
-
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
-
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
-
-fi
-pi samba
-# note samba re-reads it's config every 1 minute
-case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
-esac
+######### begin stuff belonging at the end ##########
-# add 2 lines after workgroup option
-s sed -ri '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
-s sed -ri '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
-s sed -i 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
-# remove default homes section. not sharing that.
-s sed -ri '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-
-if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
-[public]
- guest ok = yes
- read only = no
- path = /kfrodo
-EOF
-fi
case $distro in
- debian|ubuntu)
-# systemd claims it generates units from /etc/init.d, but it clearly doesn't
-# in debian. I have no idea how they are related. fuck debian right now. It's
-# not documented. samba has a systemd init file linked to /dev/null.
-# There's this https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
-# claims samba's sub-services will be started automatically by systemd... it
-# didn't on install, wonder if it will on boot. It clued me in how to start
-# it manually though. Nothing in /usr/share/doc/samba, debian admin guide
-# says nothing about any of this. (this is in debian testing as of 4/2016).
-
-s /etc/init.d/samba start
-;;
+ ubuntu|debian)
+ spa spacefm-gtk3 ;;
arch)
- sgo samba
- ;;
+ spa spacefm ;;
esac
-tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
+pi "${simple_packages[@]}"
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-mountpoint /mnt/root || s mount /mnt/root
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- mountpoint /mnt/iroot || s mount /mnt/iroot
-fi
-
-# Do this again because it occasionally has changes and
-# it can be run outside initial isntall.
-s /a/bin/fai/fai/config/distro-install-common/end
-
if $pending_reboot; then
echo "$0: pending reboot and then finished. doing it now."
s reboot now
else
echo "$0: $(date): ending now)"
fi
+exit 0