X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=distro-end;h=18edaa56b8db4e3485e37f9d327acbdf62c40343;hb=7f759d320592e791a62cd0a966350e8c53ee0976;hp=77588bf57c44a76f632bbf396d5b7db45a014f08;hpb=3024b7cceb31418712c0ccdbe9edc5bbab9291e9;p=distro-setup
diff --git a/distro-end b/distro-end
index 77588bf..18edaa5 100755
--- a/distro-end
+++ b/distro-end
@@ -1,770 +1,1334 @@
-#!/bin/bash -l
-# Copyright (C) 2016 Ian Kelling
-
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
+#!/bin/bash
+# Copyright (C) 2019 Ian Kelling
+# SPDX-License-Identifier: AGPL-3.0-or-later
+if [[ -s ~/.bashrc ]];then . ~/.bashrc;fi
+
+### setup
+source /a/bin/errhandle/err
+src="$(readlink -f -- "${BASH_SOURCE[0]}")"; src=${src%/*} # directory of this file
+
+if [[ $EUID == 0 ]]; then
+ echo "$0: error: run as regular user" >&2
+ exit 1
+fi
-# http://www.apache.org/licenses/LICENSE-2.0
+err-cleanup() {
+ echo 1 >~/.local/distro-end
+}
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+# shellcheck source=./pkgs
+source $src/pkgs
-errcatch
+echo "$0: $(date) starting now)"
+# see example of usage to understand.
+end_msg() {
+ local y
+ IFS= read -r -d '' y ||:
+ end_msg_var+="$y"
+}
+end() {
+ e "$end_msg_var"
+ echo 0 >~/.local/distro-end
+ if $pending_reboot; then
+ echo "$0: pending reboot and then finished. doing it now."
+ echo "exiting with status 0"
+ sudo reboot now
+ else
+ echo "$0: $(date): ending now)"
+ echo "exiting with status 0"
+ fi
+ exit 0
+}
+pre="${0##*/}:"
+sudo() {
+ printf "$pre %s\n" "$*"
+ SUDOD="$PWD" command sudo "$@";
+}
+sd() {
+ sudo dd of="$1" 2>/dev/null
+}
+m() { printf "$pre %s\n" "$*"; "$@"; }
+e() { printf "$pre %s\n" "$*"; }
+err() { echo "[$(date +'%Y-%m-%d %H:%M:%S%z')]: $0: $*" >&2; }
+distro=$(distro-name)
+codename=$(debian-codename)
+codename_compat=$(debian-codename-compat)
+pending_reboot=false
+sed="sed --follow-symlinks"
+## template:
+# case $distro in
+# esac
-set -x
+#### initial packages
+pup
+if isdeb; then
+ pi aptitude
+fi
-exec &> >(sudo tee -a /var/log/distro-end)
-echo "$0: $(date): starting now)"
+# avoid prompts
+sudo debconf-set-selections <
+# AllowOverride None
+# AuthType basic
+# AuthName "Authentication Required"
+# # setup one time, with root:www-data, 640
+# AuthUserFile "/etc/prometheus-htpasswd"
+# Require valid-user
+#
+# EOF
+# fi
+
+
+######### begin flidas pinned packages ######
+case $(debian-codename) in
+ # needed for debootstrap scripts for fai since fai requires debian
+ flidas)
+ curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
+ sd /etc/apt/preferences.d/flidas-xenial </dev/null </dev/null; then
+ sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
+ sd /etc/apt/preferences.d/flidas-bionic <$t <$t <$t <
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
-########### end section including li/lj ###############
-case $distro in
- arch) pi syncthing ;;
- ubuntu|debian)
- # google led me here:
- # https://apt.syncthing.net/
- curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
- s="deb http://apt.syncthing.net/ syncthing release"
- if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != $s ]]; then
- echo "$s" | s dd of=/etc/apt/sources.list.d/syncthing.list
- p update
- fi
- pi syncthing
- ;;
+ ###### begin znc setup #####
+ pi znc
+
+ # https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart after cert change.
+ # to get into the web interface,
+ # then use non-main browser or else it doebsn't allow it based on ocsp stapling from my main site.
+ # https://iankelling.org:12533/
+ s <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
+
+ # znc config generated by doing
+ # znc --makeconf
+ # selected port is also used in erc config
+ # comma separated channel list worked.
+ # while figuring things out, running znc -D for debug in foreground.
+ # to exit and save config:
+ # /msg *status shutdown
+ # configed auth on freenode by following
+ # https://wiki.znc.in/Sasl:
+ # /msg *sasl RequireAuth yes
+ # /msg *sasl Mechanism PLAIN
+ # /msg *sasl Set ident_name password
+ # created the system service after, and had to do
+ # mv /home/iank/.znc/* /var/lib/znc
+ # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
+ # and made a copy of the config files into /p/c
+ # /msg *status LoadMod --type=global log -sanitize
+ # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
+ # /msg *status LoadMod --type=network perform
+ # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
+ # /msg *perform add JOIN #fsf-office
+ #
+ # i set Buffer = 500
+ # also ran /znc LoadMod clearbufferonmsg
+ # it would be nice if erc supported erc query buffers by doing
+ # /msg *status clearbuffer /dev/null; then
+ sudo useradd --create-home -d /var/lib/znc --system --shell /sbin/nologin --comment "Account to run ZNC daemon" --user-group znc
+ fi
+ sudo chmod 700 /var/lib/znc
+ sudo chown -R znc:znc /var/lib/znc
+ # Avoid restarting if possible, reconnecting to irc is annoying.
+ # The unit file was made active with conflink.
+ # Note, avoid using ser here because we wrap sudo to prints the command first.
+ if [[ $(systemctl is-active znc) != active ]]; then
+ sgo znc
+ fi
+ ###### stop znc setup #####
+
+ end
+ ;;
esac
-# installed via f-droid
-# top right, actions, device id
-#
-# for installing on a remote comp:
-# ssh -L 8384:localhost:8384 -N frodo
-# went to http://localhost:8384/
-#
-# add folder to sync phone,
-# staggered file versioning would be my normal choice, but choose
-# trash can versioning for sake of space on phone, with
-# clean out after 7 days.
-#
-# did ser syncthing@ian start
-# then on phone, add device, hit bar code icon,
-# install bar code scanner.
+###### end website setup
+########### end section including li/lj ###############
-# no equivalent in other distros:
-case $distro in
- debian|ubuntu)
- # for gui bug reporting
- spa python-vte
- ;;
+#### desktop stuff
+case $codename_compat in
+ xenial)
+ # mate-indicator-applet and beyond are msc things I noticed diffing a
+ # standard install with mine.
+ pi xorg lightdm mate-desktop-environment mate-desktop-environment-extras mate-indicator-applet anacron
+ ;;
+ stretch)
+ pi task-mate-desktop
+ ;;
+ buster)
+ # mate doesnt have wayland support yet
+ pi task-gnome-desktop
+ ;;
+ bionic)
+ pi gnome-core
+ ;;
esac
-####### misc packages ###########
+if [[ $codename_compat == flidas ]]; then
+ # doesnt exist in newer
+ pi gnupg-doc
+fi
+
+if [[ $codename == flidas ]]; then
+ pi abrowser
+else
+ pi firefox
+ sudo ln -sf /usr/bin/firefox /usr/local/bin/abrowser
+fi
+
+# TODO: some of the X programs can be removed from pall when using wayland
+# depends gcc is a way to install suggests. this is apparently the only
+# way to install suggests even if the main package is already
+# installed. reinstall doesn't work, uninstalling can cause removing
+# dependent packages.
+pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $(apt-cache depends gcc|grep -i suggests:| awk '{print $2}') $($src/distro-pkgs)
-if [[ $HOSTNAME == frodo ]]; then
- case $distro in
- debian|ubuntu)
- # note i had to do this, which is persistent:
- # cd /i/k
- # s chgrp debian-transmission torrents partial-torrents
-
- # syslog says things like
- # 'Failed to set receive buffer: requested 4194304, got 425984'
- # google suggets giving it even more than that
- tu /etc/sysctl.conf<<'EOF'
-net.core.rmem_max = 67108864
-net.core.wmem_max = 16777216
-EOF
- s sysctl -p
-
- # some reason it doesn't seem to start automatically anyways
- pi-nostart transmission-daemon
- # config file documented here, and it's the same config
- # for daemon vs client, so it's documented in the gui.
- # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
- s ruby <<'EOF'
-require 'json'
-p = '/etc/transmission-daemon/settings.json'
-File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist' => '127.0.0.1,192.168.1.*',
-'rpc-authentication-required' => false,
-'incomplete-dir' => '/i/k/partial-torrents',
-'download-dir' => '/i/k/torrents',
-"speed-limit-up" => 700,
-"speed-limit-up-enabled" => true,
-"ratio-limit" => 1.4000,
-"ratio-limit-enabled" => true,
-})) + "\n")
+
+# website is dead june 14 2019. back in october, but meh
+sudo rm -fv /etc/apt/sources.list.d/iridium-browser.list
+# case $distro in
+# debian)
+# pi chromium ;;
+# trisquel|ubuntu)
+# wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
+# t=$(mktemp)
+# cat >$t < /dev/null; then
- case $distro in
- arch)
- s useradd \
- --system \
- --create-home \
- --home-dir /var/lib/transmission-daemon \
- --shell /bin/false \
- debian-transmission
- ;;
- *)
- s adduser --quiet \
- --system \
- --group \
- --no-create-home \
- --disabled-password \
- --home /var/lib/transmission-daemon \
- debian-transmission
- ;;
- esac
-fi
-# dunno why it's there, but get rid of it
-case $HOSTNAME in
- li|lj) s rm -rf /home/linode ;;
-esac
+##### rss2email
+# note, see bashrc for more documentation.
+pi rss2email
+sd /etc/systemd/system/rss2email.service <<'EOF'
+[Unit]
+Description=rss2email
+After=multi-user.target
-# arch had a default config,
-# debian had nothing until you start it.
-# With a little trial an error, here is a minimal config
-# taken from the generated one, plus changes that the
-# settings ui does, without a bunch of ui crap settings.
-#
-# only settings I set were
-# hostname
-# auto-connect
-for f in /home/*; do
- d=$f/.config/transmission-remote-gtk
- u=${f##*/}
- s -u $u mkdir -p $d
- s -u $u dd of=$d/config.json <<'EOF'
-{
- "profiles" : [
- {
- "profile-name" : "Default",
- "hostname" : "frodo",
- "rpc-url-path" : "/transmission/rpc",
- "username" : "",
- "password" : "",
- "auto-connect" : true,
- "ssl" : false,
- "timeout" : 40,
- "retries" : 3,
- "update-active-only" : false,
- "activeonly-fullsync-enabled" : false,
- "activeonly-fullsync-every" : 2,
- "update-interval" : 3,
- "min-update-interval" : 3,
- "session-update-interval" : 60,
- "exec-commands" : [
- ],
- "destinations" : [
- ]
- }
- ],
- "profile-id" : 0,
- "add-options-dialog" : false
-}
+[Service]
+User=iank
+Type=oneshot
+# about 24 hours of failures
+# it copies over its files without respecting symlinks, so
+# we pass options to use different location.
+ExecStart=/a/bin/log-quiet/sysd-mail-once -288 rss2email r2e -d /p/c/rss2email.json -c /p/c/rss2email.cfg run
EOF
-done
+sd /etc/systemd/system/rss2email.timer <<'EOF'
+[Unit]
+Description=rss2email
-case $distro in
- debian|ubuntu)
- pi-nostart openvpn
- # pi-nostart this doesnt seem to be good enough?
- ser disable openvpn@client
- ser disable openvpn
- ;;
- # suggests because we want the resolvconf package
- *) pi --install-suggests openvpn;;
-esac
+[Timer]
+# for initial run. required.
+OnActiveSec=30
+# for subsequent runs.
+OnUnitInactiveSec=300
-pi wget
-case $HOSTNAME in
- tp|frodo)
- case $distro in
- debian|ubuntu)
- log=$(mktemp)
- cd /a/opt
- wget -nv -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
- errallow
- set -o pipefail
- s dpkg -i google-chrome-stable_current_amd64.deb |& tee $log
- code=$?
- errcatch
- case $code in
- 0) : ;;
- *)
- # previously I had a more specific search, but dpkg
- # changed it's output as of 7/2016
- if grep 'dependency problems' \
- $log &>/dev/null; then
- s apt-get -fy install
- else
- exit 1
- fi
- ;;
-esac
-;;
-arch)
- pi google-chrome
- ;;
-esac
-;;
-esac
+[Install]
+WantedBy=timers.target
+EOF
+sudo systemctl daemon-reload
-# printer
-case $distro in
- arch)
- pi cups ghostscript gsfonts # from arch wiki cups page
- pi hplip # from google
- s gpasswd -a $USER sys # from arch wiki
- sgo org.cups.cupsd.service
- # goto http://127.0.0.1:631
- # administration tab, add new printer button.
- # In debian, I could use hte recommended driver,
- # in arch, I had to pick out the 6L driver.
- ;;
- debian|ubuntu)
- spa hplip
- ;;
- # other distros unknown
-esac
+######### begin pump.io periodic backup #############
+if [[ $HOSTNAME == frodo ]]; then
+ sd /etc/systemd/system/pumpbackup.service <<'EOF'
+[Unit]
+Description=pump li backup
+After=multi-user.target
-case $distro in
- ubuntu|debian) pi --no-install-recommends mairix notmuch ;;
- fedora|arch) spa mairix notmuch ;;
-esac
-case $distro in
- arch) spa nfs-utils ;;
- ubuntu|debian) spa nfs-client ;;
-esac
-case $distro in
- ubuntu|debian) spa par2 ;;
- arch|fedora) spa par2cmdline ;;
-esac
+[Service]
+User=iank
+Type=oneshot
+ExecStart=/a/bin/log-quiet/sysd-mail-once pump-backup /a/bin/distro-setup/pump-backup
+EOF
+ sd /etc/systemd/system/pumpbackup.timer <<'EOF'
+[Unit]
+Description=pump li backup hourly
-# needed for my tex resume
-case $distro in
- ubuntu|debian) spa texlive-full ;;
- arch) spa texlive-most ;;
- # fedora unknown
-esac
+[Timer]
+OnCalendar=hourly
-case $distro in
- ubuntu)
- # flash, unrar, codecs, ms fonts.
- # This has a manual prompt.
- spa ubuntu-restricted-extras
- ;;
- fedora)
- pi yum-utils
- # rpm fusion recommended codecs
- s su -c "yum localinstall -y --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
- pi gstreamer-plugins-ugly gstreamer-plugins-bad gstreamer-ffmpeg\
- xine-lib-extras-freeworld
- ;;
-esac
+[Install]
+WantedBy=timers.target
+EOF
+ ser daemon-reload
+ sgo pumpbackup.timer
+fi
+######### end pump.io periodic backup #############
-case $distro in
- # optional dep for firefox for h.264 video
- arch) spa gst-libav ;;
- # other distros, probably come by default
-esac
-case $distro in
- fedora|ubuntu|debian) spa gnupg-agent ;;
- arch) : ;;
-esac
+######### begin irc periodic backup #############
+if [[ $HOSTNAME == frodo ]]; then
+ sd /etc/systemd/system/ircbackup.service <<'EOF'
+[Unit]
+Description=irc li backup
+After=multi-user.target
+[Service]
+User=iank
+Type=oneshot
+ExecStart=/a/bin/log-quiet/sysd-mail-once irc-backup rsync -rlptDhSAX root@iankelling.org:/var/lib/znc/moddata/log/iank/freenode/ /k/irclogs
+EOF
+ sd /etc/systemd/system/ircbackup.timer <<'EOF'
+[Unit]
+Description=irc li backup hourly
-case $distro in
- fedora) spa pinentry-gtk ;;
- *) : ;; # comes default or with other packages
-esac
+[Timer]
+OnCalendar=hourly
-case $distro in
- arch) spa firefox pulseaudio;;
- *) : ;; # comes default or with other packages
-esac
+[Install]
+WantedBy=timers.target
+EOF
+ sudo systemctl daemon-reload
+ sgo ircbackup.timer
+fi
-case $distro in
- arch) spa ttf-dejavu;;
- debian|ubuntu) spa fonts-dejavu ;;
- # others unknown
-esac
+######### end irc periodic backup #############
case $distro in
- arch) spa xorg-xev;;
- debian|ubuntu) spa x11-utils ;;
- # others unknown
+ debian|trisquel|ubuntu)
+ # suggests resolvconf package. installing it here is redundant, but make sure anyways.
+ # todo: check other distros to make sure it\'s installed
+ pi-nostart openvpn resolvconf
+ # pi-nostart does not disable
+ ser disable openvpn
+ ;;
+ *) pi openvpn;;
esac
-case $distro in
- arch) pi virt-install;;&
- debian|ubuntu) pi virtinst ;;&
- *) pi virt-manager ;; # creates the libvirt group in debian at least
- # others unknown
-esac
-# allow user to run vms, from debian handbook
-for x in ian traci; do s usermod -a -G libvirt,kvm $x; done
-# bridge networking as user fails. google lead here, but it doesn't work:
-# oh well, I give up.
-# http://wiki.qemu.org/Features-Done/HelperNetworking
-# s mkdir /etc/qemu
-# f=/etc/qemu/bridge.conf
-# s dd of=$f <<'EOF'
-# allow br0
-# EOF
-# #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
-# s chmod 640 $f
+m /a/bin/distro-setup/radicale-setup
-case $distro in
- arch) spa cdrkit;;
- debian|ubuntu) spa genisoimage;;
- # others unknown
-esac
+############# begin syncthing setup ###########
+if [[ $HOSTNAME == frodo ]]; then
+ # It\'s simpler to just worry about running it in one place for now.
+ # I assume it would work to clone it\'s config to another non-phone
+ # and just run it in one place instead of the normal having a
+ # separate config. I lean toward using the same config, since btrfs
+ # syncs between comps.
+ # testing has relatively up to date packages
+ if ! isdebian-testing; then
+ # based on error when doing apt-get update:
+ # E: The method driver /usr/lib/apt/methods/https could not be found.
+ pi apt-transport-https
+ # google led me here:
+ # https://apt.syncthing.net/
+ curl -s https://syncthing.net/release-key.txt | sudo apt-key add -
+ s="deb http://apt.syncthing.net/ syncthing release"
+ if [[ $(cat /etc/apt/sources.list.d/syncthing.list) != "$s" ]]; then
+ echo "$s" | sd /etc/apt/sources.list.d/syncthing.list
+ p update
+ fi
+ fi
+ pi syncthing
+ m lnf -T /w/syncthing /home/iank/.config/syncthing
+ ser daemon-reload # syncthing likely not properly packaged
+ sgo syncthing@iank # runs as iank
+
+ # these things persist in ~/.config/syncthing, which I save in
+ # /w/syncthing (not in /p, because syncthing should continue to
+ # run on home server even when using laptop as primary device)
+ # open http://localhost:8384/
+ # change listen address from default to tcp://:22001,
+ # this is because we do port forward so it doesn\'t have to use
+ # some external server, but the syncthing is broken for port forward,
+ # you get a message, something "like connected to myself, this should not happen"
+ # when connecting to other local devices, so I bump the port up by 1,
+ # based on
+ # https://forum.syncthing.net/t/connected-to-myself-should-not-happen/1763/19.
+ # Without this, it was being stuck syncing at 0%.
+ # Set gui username and password.
+ #
+ # install syncthing via f-droid,
+ # folder setting, turn off send only.
+ # on phone, add device, click bar code icon
+ # on dekstop, top right, actions, device id
+ # after adding, notification will appear on desktop to confirm
+ #
+ # syncing folder. from phone to desktop: select desktop in the
+ # folder on phone\'s sync options, notification will appear in
+ # desktop\'s web ui within a minute. For the reverse, the
+ # notification will appear in android\'s notifications, you have to
+ # swipe down and tap it to add the folder. It won\'t appear in the
+ # syncthing ui, which would be intuitive, but don\'t wait for it
+ # there. The notification may not work, instead open the web gui
+ # from in the app, there should be a notification within there.
+ #
+ # On phone, set settings to run syncthing all the time, and
+ # show no notification.
+ #
+ # Folder versioning would make sense if I didn\'t already use btrfs
+ # for backups. I would choose staggered, or trash can for more space.
+ #
+ # if needed to install on a remote comp:
+ # ssh -L 8384:localhost:8384 -N frodo
+ # open http://localhost:8384/
+ #
+ # Note, the other thing i did was port forward port 22000,
+ # per https://docs.syncthing.net/users/firewall.html
-case $distro in
- arch) spa spice-gtk3 ;;
- debian|ubuntu) spa spice-client-gtk;;
- # others unknown
-esac
+fi
+############# end syncthing setup ###########
-# general known for debian/ubuntu, not for fedora
-case $distro in
- arch)
- # cdrkit for cloud-init isos
- # dnsmasq & ebtables for nat networking in libvirt
- # qemu for qemu-img, bind-tools for dig
- # dmidecode just because syslog complains
- pi unzip xorg-xmodmap dmidecode ebtables\
- bridge-utils dnsmasq qemu bind-tools
- # otherwise we get error about accessing kvm module.
- # seems like there might be a better way, but google was a bit vague.
- s sed -ri --follow-symlinks '/^ *user *=/d' /etc/libvirt/qemu.conf
- echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
- # https://bbs.archlinux.org/viewtopic.php?id=206206
- # # this should prolly go in the wiki
- sgo virtlogd.socket
- # guessing this is not needed
- #sgo virtlogd.service
- sgo libvirtd
- ;;
-esac
-case $distro in
- arch) pi virtviewer ;;
- *) : ;; # other distros have it as a dependency afaik.
+####### begin misc packages ###########
+
+case $codename in
+ flidas)
+ :
+ ;;
esac
+# sakura config is owned by ian
+m reset-sakura
+m reset-konsole
+m sudo -u user2 -i reset-konsole
+# user2 xscreensaver we don't want to reset
+m reset-xscreensaver
-case $distro in
- fedora) cabal install shellcheck ;;
- *) spa shellcheck ;;
- # unknown for older ubuntu
-esac
+# this would install from cabal for newer / consistent version across os, but it screws up xmonad, so disabled for now.
+# this is also in primary-setup
+# pi libxss-dev # dependency based on build failure
+# cabal update
+# cabal install --upgrade-dependencies --force-reinstalls arbtt
+# also, i assume syncing this between machines somehow messed thin
+#lnf -T /m/arbtt-capture.log ~/.arbtt/capture.log
-case $distro in
- arch|debian|ubuntu) spa pumpa ;;
- # others unknown. do have a buildscript:
- # /a/bin/buildscripts/pumpa ;;
-esac
+m primary-setup
+if [[ ! -e ~/.linphonerc && -e /p/.linphonerc-initial ]]; then
+ m cp /p/.linphonerc-initial ~/.linphonerc
+fi
-case $distro in
- debian|ubuntu) spa android-tools-adb/unstable ;;
- arch) spa android-tools ;;
- # other distros unknown
-esac
-case $distro in
+### begin spd install
+pi libswitch-perl libdigest-md5-file-perl libgnupg-interface-perl
+t=$(mktemp)
+m wget -O $t http://mirror.fsf.org/fsfsys-trisquel/fsfsys-trisquel/pool/main/s/spd-perl/spd-perl_0.2-1_amd64.deb
+sudo dpkg -i $t
+m rm $t
+# this guesses at the appropriate directory, adjust if needed
+perldir=(/usr/lib/x86_64-linux-gnu/perl/5.*)
+m sudo ln -sf ../../../perl/5.18.2/SPD/ ${perldir[0]}
+# newer distro had gpg2 as default, older one, flidas, need to make it that way
+gpgpath=$(which gpg2)
+if [[ $x ]]; then
+ sudo mkdir -p /usr/local/spdhackfix
+ s lnf -T $gpgpath /usr/local/spdhackfix/gpg
+fi
+### end spd install
+
+
+# nagstamon setting which were set through the ui
+# in filters tab:
+# all unknown sources
+# all warning services
+# acknowledged hosts & services
+# hosts & services down for maintenence
+# services on down hosts
+# services on hosts in maintenece
+# services on unreachable osts
+# hosts in soft state
+# services in soft state
+# in display tab: fullscreen
+
+# these translate to these settings I think
+# filter_acknowledged_hosts_services = True
+# filter_all_unknown_services = True
+# filter_all_warning_services = True
+# filter_hosts_in_soft_state = True
+# filter_hosts_services_maintenance = True
+# filter_services_in_soft_state = True
+# filter_services_on_down_hosts = True
+# filter_services_on_hosts_in_maintenance = True
+# filter_services_on_unreachable_hosts = True
+# notify_if_up = False
+# statusbar_floating = False
+# fullscreen = True
+# but i'm just going to rely on the webpage plus sms for now.
+
+
+# it asks if it should make users in it's group capture packets without root,
+# which is arguably more secure than running wireshark as root. default is no,
+# which is what i prefer, since I plan to use tcpdump to input to wireshark.
+s DEBIAN_FRONTEND=noninteractive pi wireshark-gtk
+
+# /run and /dev/shm are listed as required for pulseaudio. All 4 in the group
+# listed in the default config as suggested.
+# /run/usr/1000 i noticed was missing for pulseaudio
+# /run/user/0 just seemed like a not bad idea, given the above
+tu /etc/schroot/desktop/fstab <<'EOF'
+/run /run none rw,bind 0 0
+/run/lock /run/lock none rw,bind 0 0
+/dev/shm /dev/shm none rw,bind 0 0
+/run/shm /run/shm none rw,bind 0 0
+/run/user/1000 /run/user/1000 none rw,bind 0 0
+/run/user/1001 /run/user/1001 none rw,bind 0 0
+/run/user/0 /run/user/0 none rw,bind 0 0
+EOF
+
+mkschroot() {
+ distro=$1
+ shift
+ case $distro in
+ ubuntu)
+ repo=http://archive.ubuntu.com/ubuntu/
+ ;;
debian)
- if [[ `debian-archive` == testing ]]; then
- # has no unstable dependencies
- spa bitcoin-qt/unstable
- fi
- ;;
- # other distros unknown
-esac
+ repo=http://deb.debian.org/debian/
+ ;;
+ esac
+ n=$1
+ shift
+ if schroot -l | grep -xFq chroot:$n; then
+ echo "$0: $n schroot already installed, skipping"
+ return 0
+ fi
+ apps=($@)
+ d=/nocow/schroot/$n
+ sd /etc/schroot/chroot.d/$n.conf < /dev/null; then
+ sudo groupadd -g 450 debian-transmission
+ sudo adduser --quiet \
+ --gid 450 \
+ --uid 450 \
+ --system \
+ --no-create-home \
+ --disabled-password \
+ --home /var/lib/transmission-daemon \
+ debian-transmission
+fi
+# We want group writable stuff from transmission.
+# However, after setting this, I learn that transmission sets it's
+# own umask based on it's settings file. Well, no harm leaving this
+# so it's set right from the beginning.
+sudo chfn debian-transmission -o umask=0002
+
+# note i had to do this, which is persistent:
+# cd /i/k
+# s chgrp debian-transmission torrents partial-torrents
+
+# syslog says things like
+# 'Failed to set receive buffer: requested 4194304, got 425984'
+# google suggets giving it even more than that
+tu /etc/sysctl.conf<<'EOF'
+net.core.rmem_max = 67108864
+net.core.wmem_max = 16777216
+EOF
+sudo sysctl -p
+
+# some reason it doesn\'t seem to start automatically anyways
+pi-nostart transmission-daemon
+# be extra sure its not started
+ser disable transmission-daemon
+ser stop transmission-daemon
+
+# the folder was moved here after an install around 02/2017.
+# it contains runtime data,
+# plus a simple symlink to the config file which it\'s
+# not worth separating out.
+# between comps, the uid can change
+f=$tdir/transmission-daemon
+mkdir -p $f
+s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
+s lnf -T /etc/transmission-daemon/settings.json $f/settings.json
+sudo chown -R debian-transmission:debian-transmission $f
+for f in $tdir/partial-torrents $tdir/torrents; do
+ if [[ -e $f ]]; then
+ sudo chown -R debian-transmission:user2 $f
+ fi
+done
+sudo chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
+#
+# config file documented here, and it\'s the same config
+# for daemon vs client, so it\'s documented in the gui.
+# https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
+#
+# I originaly setup rpc-whitelist, but after using
+# routing to a network namespace, it doesn\'t see the
+# real source address, so it\'s disabled.
+#
+# Changed the cache-size to 256 mb, reduces disk use.
+# It is a read & write cache.
+sudo ruby < false,
+'rpc-authentication-required' => false,
+'incomplete-dir' => '$tdir/partial-torrents',
+'incomplete-dir-enabled' => true,
+'download-dir' => '$tdir/torrents',
+"speed-limit-up" => 800,
+"speed-limit-up-enabled" => true,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
+"ratio-limit-enabled" => true,
+})) + "\n")
+EOF
+####### end transmission
-# note this failed running at the beginning of this file,
-# because no systemd user instance was running.
-# Doing systemd --user resulted in
-# Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
-
-if isdebian-testing; then
- # as of 7/2016, has no unstable deps, and is not in testing anymore.
- pi synergy/unstable
-else
- pi synergy
+# trisquel 8 = openvpn, debian stretch = openvpn-client
+vpn_ser=openvpn-client
+if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
+ vpn_ser=openvpn
fi
-case $distro in
- # ubuntu unknown. probably the same as debian, just check if the
- # init scripts come with the package.
- debian)
- # copied from arch, but moved to etc
- s dd of=/etc/systemd/user/synergys.service <<'EOF'
+sd /etc/systemd/system/transmission-daemon-nn.service </dev/null) || continue
+ if [[ ! $uid -ge 1000 ]]; then
+ continue
+ fi
+ d=$f/.config/transmission-remote-gtk
+ sudo -u $u mkdir -p $d
+ sudo -u $u dd of=$d/config.json </dev/null; then
+# cd $(mktemp -d)
+# wget https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh
+# # added some stuff to envonment.sh for profile based on
+# # manual instructions
+# # wget https://sv.gnu.org/people/viewgpg.php?user_id=15145 -qO - | gpg --import -
+# # echo is to get past prompt
+# yes | sudo -E HOME=$HOME bash guix-install.sh || [[ $? == 141 ]]
+# guix install glibc-utf8-locales
+# guix package --install guile
+# fi
-# persistent virtual machines
-case $distro in
- debian|ubuntu)
- pi libosinfo-bin;
- ;;
-esac
-# distro may not know about win 10 yet.
-variant=win7
-if ! virt-install --os-variant list &>/dev/null; then # we are using a newer virt-install
- for v in 10 8.1 8; do
- if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
- variant=win$v
- break
- fi
- done
-fi
+pi tor
+m /a/bin/buildscripts/tor-browser
-if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
-
- # created account with
- # win10vmian@outlook.com, and easy to remember password
- # win 10 virtio, makes disk way way way faster
- # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
- # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
- # for installing virtio after initial install instead of with initial iso:
- # qemu-img create -f qcow2 fake.qcow2 1G
- # --disk=/a/images/virtio-win.iso,device=cdrom \
- # --disk=/a/images/fake.qcow2,bus=virtio
- # Also,
- # went to device manager, saw 2 pci devices with yellow !,
- # did search for drivers, pick cdrom location, done.
- #
- # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
- # google said there was a control panel option for it, but
- # that turned out to be a lie.
- # Put this in a .bat file and run as administrator to turn off
- # hyberboot which fucks things up.
- # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
- # power settings, turn off display: never
- # run "control userpasswords2", turn on automatic login.
- # note: when changing devices, I just undefine, the create the vm again.
-
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
-
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
-
-fi
+# nfs server
+pi-nostart nfs-kernel-server
+# networkmanager has this nasty behavior on flidas: if the machine
+# crashes with dnsmasq running, on subsequent boot, it adds an entry to
+# resolvconf for 127.0.0.1 in some stupid attempt to restore
+# nameservers.
+# This can be manually fixed by stoping dnsmasq,
+# then based on whats in /run/dnsmasq/, i see we can run
+# s resolvconf -d NetworkManager
+# oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
+ser disable NetworkManager
-pi samba
-# note samba re-reads it's config every 1 minute
-case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
-esac
-# add 2 lines after workgroup option
-s sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
-s sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
-s sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
-# remove default homes section. not sharing that.
-s sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-
-if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
-[public]
- guest ok = yes
- read only = no
- path = /kfrodo
+if [[ $HOSTNAME == frodo ]]; then
+ # nohide = export filesystems mounted deeper than the export point
+ # fsid=0 makes this export the "root" export
+ # not documented in the man page, but this means
+ # 1. it can be mounted with a shorthand of server:/
+ # 2. exports that are subdirectories of this one will automatically be mounted
+ tu /etc/exports <<'EOF'
+/k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
EOF
+ sudo exportfs -rav
fi
-case $distro in
- debian|ubuntu)
-# systemd claims it generates units from /etc/init.d, but it clearly doesn't
-# in debian. I have no idea how they are related. fuck debian right now. It's
-# not documented. samba has a systemd init file linked to /dev/null.
-# There's this https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
-# claims samba's sub-services will be started automatically by systemd... it
-# didn't on install, wonder if it will on boot. It clued me in how to start
-# it manually though. Nothing in /usr/share/doc/samba, debian admin guide
-# says nothing about any of this. (this is in debian testing as of 4/2016).
-
-s /etc/init.d/samba start
-;;
- arch)
- sgo samba
- ;;
-esac
-tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-mountpoint /mnt/root || s mount /mnt/root
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- mountpoint /mnt/iroot || s mount /mnt/iroot
-fi
+# if I was going to create a persistent vm, i might do it like this:
+# variant=something # from: virt-install --os-variant list
+# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ # -n some_name --import --os-variant $variant --cpu host-model-only
-######### begin stuff belonging at the end ##########
-
-
-# Apps we want to override others for default file handler:
-# simplest way in debian is to just install them last.
-simple_packages+=(
- mpv
-)
-
-case $distro in
- ubuntu|debian)
- spa spacefm-gtk3 ;;
- arch)
- spa spacefm ;;
-esac
-
-
-pi "${simple_packages[@]}"
+######### begin stuff belonging at the end ##########
-if $pending_reboot; then
- echo "$0: pending reboot and then finished. doing it now."
- s reboot now
-else
- echo "$0: $(date): ending now)"
-fi
+end