X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=brc2;h=fdb2c060e6de9a0742e667d585f768be98b9001b;hb=602a1874cc11a7d371890cdae4c0dc982267ea89;hp=336d938fb47d43d90fe0a298318e02e4f11c82bd;hpb=75e62ecbdabb055ef8d556e2e3aad7117557eb92;p=distro-setup

diff --git a/brc2 b/brc2
index 336d938..fdb2c06 100644
--- a/brc2
+++ b/brc2
@@ -87,6 +87,8 @@ multimic() {
   pactl load-module module-remap-source source_name=iancombine master=ianinput.monitor source_properties=device.description=iancombine
 }
 
+# h ssh test
+# For testing restrictive ssh.
 hstest() {
   install-my-scripts
   d=$(mktemp -d)
@@ -94,13 +96,20 @@ hstest() {
   s command ssh -F $d/config -i /q/root/h "$@"
 }
 
-hrtest() {
+# h rsync test
+# For testing restrictive rsync
+hrtest() { #
   install-my-scripts
   d=$(mktemp -d)
   sed '/^ *IdentityFile/d' ~/.ssh/config >$d/config
   s rsync -e "ssh -F $d/config -i /q/root/h" "$@"
 }
 
+# rsync as root and avoid the default restrictive h key & config.
+rootrsync() {
+  s rsync -e "ssh -F /root/.ssh/confighome" "$@"
+}
+
 
 slemacs() {
   local arg rtime v
@@ -148,6 +157,13 @@ rsync -rptL --delete --filter=". /b/ds/sl/rsync-filter" /a/opt/emacs-trisquel8-n
 EOF
 }
 
+rm-docker-iptables() {
+  s iptables -S  | gr docker | gr -- -A | sed 's/-A/-D/'| while read -r l; do sudo iptables  $l; done
+  s iptables -S -t nat | gr docker | gr -- -A | sed 's/-A/-D/'| while read -r l; do sudo iptables -t nat $l; done
+  s iptables -S | gr docker | gr -- -N | sed 's/-N/-X/'| while read -r l; do sudo iptables $l; done
+  s iptables -S -t nat | gr docker | gr -- -N | sed 's/-N/-X/'| while read -r l; do sudo iptables -t nat $l; done
+}
+
 # usage mkschroot [-] distro codename packages
 # - means no piping in of sources.list
 mkschroot() {
@@ -257,10 +273,10 @@ tback() {
 # s sshfs bu@$host:/bu/home/md /bu/mnt -o reconnect,ServerAliveInterval=20,ServerAliveCountMax=30 -o allow_other
 
 eqgo() {
-  enn -M $(exiqgrep -i)
+  enn -M $(exiqgrep -i -r.\*)
 }
 eqgo1() {
-  enn -M $(exiqgrep -i|h1)
+  enn -M $(exipick -i -r.\*|h1)
 }
 
 
@@ -388,11 +404,15 @@ bbk() { # btrbk wrapper
   if $active; then
     ser stop btrbk.timer
   fi
-  if [[ $(systemctl is-active btrbk.service ||:) != inactive ]]; then
-    echo "cron btrbk is already running"
-    if $active; then ser start btrbk.timer; fi
-    return 1
-  fi
+  btrbk_is_active=$(systemctl is-active btrbk.service ||:)
+  case $btrbk_is_active in
+    inactive|failed) : ;;
+    *)
+      echo "bbk: error: systemctl is-active btrbk.service output: $btrbk_is_active"
+      if $active; then ser start btrbk.timer; fi
+      return 1
+      ;;
+  esac
   # run latest
   install-my-scripts
   # todo: consider changing this to srun and having the args come
@@ -560,7 +580,7 @@ dnsb8() {
   local f=/var/lib/bind/db.b8.nz
   m ser stop named
   m sleep 1
-  m sudo rm -fv $f.jnl
+  m sudo rm -fv $f.jnl $f.signed.jnl
   m sudo install -m 644 -o bind -g bind /p/c/machine_specific/vps/bind-initial/db.b8.nz $f
   m ser restart named
 }
@@ -1172,16 +1192,18 @@ mnsnonet() {
 
 
 lom() {
+  # l = the loopback device
   local l base
   if [[ $1 == /* ]]; then
     base=${1##*/}
+    fs_file=$1
     if mns $base mountpoint -q /mnt/$base; then
       return 0
     fi
-    l=$(losetup -j $1 | sed -rn 's/^([^ ]+): .*/\1/p' | head -n1 ||:)
+    l=$(losetup -j $fs_file | sed -rn 's/^([^ ]+): .*/\1/p' | head -n1 ||:)
     if [[ ! $l ]]; then
       l=$(sudo losetup -f)
-      m sudo losetup $l $1
+      m sudo losetup $l $fs_file
     fi
     if ! sudo cryptsetup status /dev/mapper/$base &>/dev/null; then
       if ! sudo cryptsetup luksOpen $l $base; then
@@ -1204,7 +1226,7 @@ lom() {
         return 1
       fi
     fi
-    l=$(losetup -l --noheadings | awk '$6 ~ /\/'$1'$/ {print $1}')
+    l=$(losetup -l --noheadings | awk '$6 ~ /\/'$base'$/ {print $1}')
     if [[ $l ]]; then
       m sudo losetup -d $l
     else
@@ -1275,6 +1297,16 @@ mbdisable() {
   mv -T $src $dst
   set +x
 }
+mb2disable() {
+  local mb=$1
+  dst=/m/md/$mb
+  src=/m/4e2/$mb
+  set -x
+  [[ -e $src ]] || { set +x; return 1; }
+  if [[ -L $dst ]]; then rm $dst; fi
+  mv -T $src $dst
+  set +x
+}
 
 
 mdt() {
@@ -1580,10 +1612,6 @@ spd() {
   PATH=/usr/local/spdhackfix:$PATH command spd "$@"
 }
 
-spend() {
-  sudo systemctl suspend
-}
-
 spamf() { # spamtest on FILE
   local spamcpre spamdpid
 
@@ -1683,6 +1711,46 @@ alert200() {
   done
 }
 
+# alert on changes to a webpage (just the base page that curl gets)
+# usage: weblert URL [SUBJECT...]
+weblert() {
+  local u old new quiet
+  quiet=false
+  case $1 in
+    # dont send a diff of the html. some html is not very readable
+    -q) quiet=true
+        shift
+        ;;
+  esac
+  u="$1"
+  shift
+  subject="${*:-weblert}"
+  old=$(curl -s "$u") ||:
+  while true; do
+    new=$(curl -s "$u") ||:
+    if [[ $old && $new ]]; then
+      if [[ $new != "$old" ]]; then
+        if $quiet; then
+          echo | daylertme "$subject"
+        else
+          diff <(printf "%s\n" "$old") <(printf "%s\n" "$new") | daylertme "$subject" ||:
+        fi
+      fi
+      old="$new"
+    fi
+    sleep $(( 60 + RANDOM % 120 ))
+  done
+}
+
+torshell() {
+  # per man torsocks
+  source `type -p torsocks` on
+}
+
+eless2() {
+  less /var/log/exim4/mymain
+}
+
 
 # mail related
 testexim() {
@@ -1702,10 +1770,9 @@ testexim() {
   #
   # -t = get recipient from header
   exim -d -t <<'EOF'
-From: i@dmarctest.b8.nz
-To: mailman@dev.fsf.org
+From: root@$(hostname-f)
+To: root@$(hostname-f)
 Subject: test2
-Reply-to: rtest@iankelling.org
 
 This is a test message.
 EOF
@@ -1776,18 +1843,59 @@ enn() {
   m s nsenter -t $pid -n -m $ecmd "$@"
 }
 
+# get pid of systemd service
+servicepid() {
+  local pid unit dir
+  unit="$1"
+  pid=$(systemctl show --property MainPID --value "$unit")
+  case $pid in
+    [1-9]*) : ;;
+    *)
+
+      dir=/sys/fs/cgroup/system.slice
+      if [[ ! -d $dir ]]; then
+        # t10 and older directory.
+        dir=/sys/fs/cgroup/systemd/system.slice
+      fi
+
+      # 0 or empty.  This file includes the MainPid, so I expect we
+      # could just get this in the first place, but i don't know if that
+      # is always the case.
+      pid=$(head -n1 $dir/${unit%.service}.service/cgroup.procs)
+      ;;
+  esac
+  if [[ $pid ]]; then
+    printf "%s\n" "$pid"
+  else
+    return 1
+  fi
+}
+
 sdnbash() { # systemd namespace bash
-  local unit=$1
-  m sudo nsenter -t $(systemctl show --property MainPID --value $unit) -n -m sudo -u $USER -i bash
+  local unit pid
+  unit=$1
+  pid=$(servicepid $unit)
+  m sudo nsenter -t $pid -n -m sudo -u $USER -i bash
 }
 
-mailnnbash() {
-  m sudo nsenter -t $(systemctl show --property MainPID --value mailnn) -n -m sudo -u $USER -i bash
+sdncmd() { # systemd namespace cmd
+  local unit pid
+  unit=$1
+  shift
+  pid=$(servicepid $unit)
+  m sudo nsenter -t $pid -n -m sudo -u $USER -i "$@"
 }
 
-mailvpnbash() {
-  m sudo nsenter -t $(pgrep -f "/usr/sbin/openvpn .* --config /etc/openvpn/.*mail.conf") -n -m sudo -u $USER -i bash
+
+mailnnbash() {
+  sdnbash mailnn
 }
+
+# we use wireguard now, use mailnnbash.
+# mailvpnbash() {
+#   m sudo nsenter -t $(pgrep -f "/usr/sbin/openvpn .* --config /etc/openvpn/.*mail.conf") -n -m sudo -u $USER -i bash
+# }
+
 eximbash() {
   local pid
   pid=$(pgrep -f "/usr/sbin/exim4 -bd -q30m -C /etc/exim4/my.conf"|h1)
@@ -1806,30 +1914,27 @@ unboundbash() {
   m sudo nsenter -t $(systemctl status unbound| sed -n '/^ *Main PID:/s/[^0-9]//gp') -n -m sudo -u $USER -i bash
 }
 
+nmtc() {
+  s nmtui-connect "$@"
+}
+
 mailnncheck() {
-  local p pid ns mailnn
+  local unit pid ns mailnn
   # mailvpn would belong on the list if using openvpn
-  for p in mailnn unbound dovecot spamassassin exim4 radicale; do
-    case $p in
-      exim4|radicale)
-        pid=$(ps -eo pid,cgroup | grep /system.slice/$p.service | awk '{print $1}')
-        ;;
-      *)
-        pid=$(s systemctl show --property MainPID --value $p)
-        ;;
-    esac
-    echo p=$p pid=$pid
+  for unit in mailnn unbound dovecot spamassassin exim4 radicale; do
+    pid=$(servicepid $unit)
+    echo debug: unit=$unit pid=$pid
     if [[ ! $pid ]]; then
-      echo failed to find pid for $p
+      echo failed to find pid for unit=$unit
       continue
     fi
     if ! ns=$(s readlink /proc/$pid/ns/net); then
-      echo failed to find ns for $p pid=$pid
+      echo failed to find ns for unit=$unit pid=$pid
       continue
     fi
     if [[  $mailnn ]]; then
       if [[ $ns != "$mailnn" ]]; then
-        echo "$p ns $ns != $mailnn"
+        echo "$unit ns $ns != $mailnn"
       fi
     else
       mailnn=$ns
@@ -2109,7 +2214,9 @@ path-add --end $HOME/.cargo/bin
 
 if type -P rg &>/dev/null; then
   # --no-messages because of annoying errors on broken symlinks
-  rg() { command rg --no-messages -L -i -M 300 --no-ignore "$@" || return $?; }
+  # -z = search .gz etc files
+  # -. = search dotfilesq
+  rg() { command rg -. -z --no-messages -L -i -M 900 --no-ignore-parent --no-ignore-vcs -g '!.git' -g '!auto-save-list' -g '!.savehist' "$@" || return $?; }
   #fails if not exist. ignore
   complete -r rg 2>/dev/null ||:
 else