X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;f=brc2;h=73dc3daaed782cbffc1f3c00e6111a4adc50bb1c;hb=9ac513d1086f22a8dede2ebe3ca0236443bdc429;hp=1a695625be4d8ae5febc176194ae2c42e33785bb;hpb=e50bed1c68dfabd1843d755254efbe0a7b29e49c;p=distro-setup

diff --git a/brc2 b/brc2
index 1a69562..73dc3da 100644
--- a/brc2
+++ b/brc2
@@ -290,7 +290,10 @@ tback() {
 # s sshfs bu@$host:/bu/home/md /bu/mnt -o reconnect,ServerAliveInterval=20,ServerAliveCountMax=30 -o allow_other
 
 eqgo() {
-  enn -M "$(exiqgrep -i -r.\*)"
+  local -a array tmpstr
+  tmpstr=$(exiqgrep -i -r.\*)
+  mapfile -t array <<<"$tmpstr"
+  enn -M "${array[@]}"
 }
 eqgo1() {
   enn -M "$(exipick -i -r.\*|h1)"
@@ -349,7 +352,7 @@ alerts() {
 ralerts() { # remote alerts
   local ret shell
   # this list is duplicated in check-remote-mailqs
-  for h in bk je li frodo kwwg x3wg x2wg kdwg sywg; do
+  for h in bk je li frodo x3wg kdwg sywg; do
     echo $h:
     shell="ssh $h"
     if [[ $HOSTNAME == "${h%wg}" ]]; then
@@ -663,13 +666,14 @@ beetag() {
   local last_genre_i fstring tag id char new_item char_i genre tag remove doplay i j random path
   local do_rare_genres read_wait help line lsout tmp ls_line skip_lookback
   local escape_char escaped_input expected_input skip_input_regex right_pad erasable_line seek_sec
-  local pl_state_path pl_state_dir pl_state_file
-  local new_random pl_seed_path seed_num seed_file fmt
+  local pl_state_path pl_state_dir pl_state_file tmpstr
+  local new_random pl_seed_path seed_num seed_file fmt first_play
   local -a pl_tags buttons button_map ids tags tmp_tags initial_ls ls_lines paths
   local -A button_i
   local -i i j volume scrolled id_count line_int skip_start pre_j_count head_count skip_lookback
   local -i overflow_lines overflow
 
+  first_play=true
   erasable_line=false
   escape_char=$(printf "\u1b")
   scrolled=999 # more than any $LINES
@@ -743,7 +747,8 @@ beetag() {
   # PijokVipiotOzeph is just a random string for a delimiter
   fmt='%ifdef{rating,$rating }'"$fstring"'$genre | $title - $artist - $album   $length  $id PijokVipiotOzeph $path'
   # shellcheck disable=SC2016 # obvious reason
-  mapfile -t initial_ls < <(beet ls -f "$fmt" "$@" | { if $random; then sort -R --random-source=$pl_seed_path; else cat; fi; } )
+  tmpstr=$(beet ls -f "$fmt" "$@" | { if $random; then sort -R --random-source=$pl_seed_path; else cat; fi; } )
+  mapfile -t initial_ls <<<"$tmpstr"
   id_count=${#initial_ls[@]}
   for line in "${initial_ls[@]}"; do
     path="${line#*PijokVipiotOzeph }"
@@ -786,11 +791,9 @@ beetag() {
   if $doplay; then
     #{ mpv --profile=a --volume=$volume --idle 2>&1 & } 2>/dev/null
     mpv --profile=a --volume=$volume --idle &
-    # if we dont sleep, we get error like this:
+    # if we dont sleep, can expect an error like this:
     # socat[1103381] E connect(5, AF=1 "/tmp/mpvsock", 14): Connection refused
-    # and strangely, it persists until mpv is restarted.
-    # .1 sleep was too little.
-    sleep .2
+    sleep .1
   fi
 
   while true; do
@@ -816,7 +819,21 @@ beetag() {
       #{ mpv --profile=a --volume=$volume "$path" 2>&1 & } 2>/dev/null
       # old
       #{ beet play "--args=--volume=$volume" "id:$id" 2>&1 & } 2>/dev/null
-      mpvrpc '{ "command": ["loadfile", "'"$path"'"] }'
+
+      # on slow systems, we may need to wait like .3 seconds before mpv
+      # is ready. so impatiently check until it is ready
+      if $first_play; then
+        first_play=false
+        for (( i=0; i<20; i++ )); do
+          if [[ $(mpvrpco '{ "command": ["get_property", "idle-active"] }' 2>/dev/null | jq .data) == true ]]; then
+            mpvrpc '{ "command": ["loadfile", "'"$path"'"] }' 2>/dev/null
+            break
+          fi
+          sleep .1
+        done
+      else
+        mpvrpc '{ "command": ["loadfile", "'"$path"'"] }'
+      fi
       erasable_line=false
     fi
     while true; do
@@ -828,7 +845,8 @@ beetag() {
         # Automatically skip to the next song if this one ends, unless
         # we turn off the autoplay.
         if (( ret == 142 )) || [[ ! $char ]]; then
-          if jobs -p | grep -q . &>/dev/null; then
+          if jobs -p | grep -q . &>/dev/null && \
+              [[ $(mpvrpco '{ "command": ["get_property", "idle-active"] }' | jq .data) == false ]]; then
             continue
           else
             break
@@ -942,7 +960,7 @@ beetag() {
           read -rsn2 escaped_input
           skip_input_regex="^[0-9]+$"
           case $escaped_input in
-            # up char
+            # up char: show all the songs, use less
             '[A')
               skip_start=0
               skip_lookback=5
@@ -1267,7 +1285,7 @@ scr() {
 # tried to use ceb2txt but it failed because of schema
 # slightly different than what it expected.
 cheogram-get-logs() {
-  adb shell rm -r /storage/emulated/0/Download/Cheogram/Backup
+  #adb shell rm -r /storage/emulated/0/Download/Cheogram/Backup
   read -r -p "do cheogram backup on phone, do not enable extra cheogram data. press any key when done"
   cd /p/cheogram
   rm -rf Backup b
@@ -1298,11 +1316,17 @@ order by timeSent;"
 mycheologs() {
   local days q
   days=${1:-16}
-  # timezone compared to utc. note: this will need adjustment for spring/fall.
-  zone_offset=$(( 60 * 60 * 5 ))
+  # timezone compared to utc. note: this takes the current offset, so if daylight savings change
+  # happened in the looking back period, this won't account for it.
+  zone_offset=$(( $( date +%z | sed 's/[^1-9-]*//g' ) * 60 * 60))
+  case $zone_offset in
+    -*) : ;;
+    *) zone_offset="+ $zone_offset"
+  esac
+  echo zone_offset=$zone_offset
   q="
 select
- datetime(substr(timeSent,0,11) - $zone_offset,  'unixepoch'),
+ datetime(substr(timeSent,0,11) $zone_offset,  'unixepoch'),
  body
 from messages
 where timeSent > $(( (EPOCHSECONDS - days * 60 * 60 * 24) * 1000 ))
@@ -1973,7 +1997,65 @@ tl() {
   t s w
 }
 
-arbttlog() { arbtt-dump "$@" | grep -v '( )\|Current Desktop' | sed -rn '/^[^ ]/{N;s/^(.{21})([0-9]*)[0-9]{3}m.*\(\*/\1\2/;s/^(.{21})[0-9]*.*\(\*/\1/;s/\n//;p}' ;   }
+focus() {
+  /p/c/proc/focus/linux-amd64/focus &
+  watcharb5
+  kill %%
+}
+
+
+watcharb5() {
+  local char ret
+  killall arbtt-capture ||:
+  rm -f ~/.arbtt/capture.log
+  arbtt-capture --sample-rate=10 &
+  clear
+  while true; do
+    arb5
+    ret=0
+    # i first thought to sleep and capture ctrl-c, but it seems we can't
+    # capture control-c, unless maybe we implement the commands in a
+    # separate script or maybe add err-cleanup to err. Anyways, this
+    # method is superior because any single char exits.
+    read -rsN1 -t 5 char || ret=$?
+    if (( ret == 142 )) || [[ ! $char ]]; then
+      # debug
+      #e ret=$ret char=$char
+      :
+    else
+      killall arbtt-capture ||:
+      return 0
+    fi
+    clear
+  done
+
+}
+
+arb5() {
+  local i l sec
+  i=0
+  if [[ ! -e ~/.arbtt/capture.log ]]; then
+    sleep 5
+  fi
+  # https://stackoverflow.com/questions/56486272/how-to-concat-multiple-fields-to-same-line-with-jq
+  arbtt-dump -l 30 -t json | jq -r '.[] | [ ( .inactive  / 1000 | floor ) , ( .windows[] | select (.active == true) |.title) ] | @tsv' \
+    | tac | while read -r sec l; do
+    if (( i % 6 == 0 && i >= 2 )); then
+      echo == $(( i / 6 + 1 )) ==
+    fi
+    if (( sec > 10 )); then
+      printf "%3d %s\n" $sec "$l"
+    else
+      printf "    %s\n" "$l"
+    fi
+    i=$(( i + 1 ))
+  done
+}
+
+arbttlog() {
+  # from the log, show only the currently active window, and the number of
+  # seconds of input inactivity.
+  arbtt-dump "$@" | grep -v '( )\|Current Desktop' | sed -rn '/^[^ ]/{N;s/^(.{21})([0-9]*)[0-9]{3}m.*\(\*/\1\2/;s/^(.{21})[0-9]*.*\(\*/\1/;s/\n//;p}' ;   }
 
 idea() {
   /a/opt/idea-IC-163.7743.44/bin/idea.sh "$@" & r
@@ -3170,6 +3252,25 @@ vspicy() { # usage: VIRSH_DOMAIN
 wian() {
   cat-new-files /m/4e/INBOX/new
 }
+wakehours() {
+  local sec
+  if (( $# != 1 )) ; then
+    echo wakehours: error: expected 1 arg, got $# >&2
+    return 1
+  fi
+  sec=$(( EPOCHSECONDS -  $( date +%s -d $1am ) ))
+  printf "%d:%02d\n" $(( sec / 60 / 60)) $(( (sec / 60) % 60 ))
+}
+
+calvis() { # calendar visualize
+  install -m 600 /dev/null /tmp/calendar-bytes
+  while read l; do
+    for char in $l; do
+      printf "\x$(printf "%x" $char)" >>/tmp/calendar-bytes
+    done
+  done < <(grep -v '[#-]' /p/calendar-data)
+  /p/c/proc/calendar/linux-amd64/calendar
+}
 
 wtr() { curl wttr.in/boston; }