X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;ds=sidebyside;f=distro-end;h=87a54e3af75a4bd81230f907fd3f61924b60f267;hb=4d0dc703ef2e62cd16ea84f27456f6f50f74baa3;hp=f12d57515672f0de4020fb8a1b840b21fd26c983;hpb=82b146c2299fce1aec68d492e4bd881d81e8e6c9;p=distro-setup
diff --git a/distro-end b/distro-end
index f12d575..87a54e3 100755
--- a/distro-end
+++ b/distro-end
@@ -1,795 +1,1288 @@
#!/bin/bash -l
-# Copyright (C) 2016 Ian Kelling
+# Copyright (C) 2019 Ian Kelling
+# SPDX-License-Identifier: AGPL-3.0-or-later
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
+### setup
+source /a/bin/errhandle/err
+src="$(readlink -f -- "${BASH_SOURCE[0]}")"; src=${src%/*} # directory of this file
-# http://www.apache.org/licenses/LICENSE-2.0
-
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+if [[ $EUID == 0 ]]; then
+ echo "$0: error: run as regular user" >&2
+ exit 1
+fi
-errcatch
+_errcatch_cleanup() {
+ echo 1 >~/.local/distro-end
+}
-set -x
+# shellcheck source=./pkgs
+source $src/pkgs
exec &> >(sudo tee -a /var/log/distro-end)
echo "$0: $(date): starting now)"
-
-src="${BASH_SOURCE%/*}"
-
+# see example of usage to understand.
end_msg() {
- = local y
- IFS= read -r -d '' y ||:
- end_msg_var+="$y"
+ local y
+ IFS= read -r -d '' y ||:
+ end_msg_var+="$y"
}
-
-spa() { # simple package add
- simple_packages+=($@)
+end() {
+ e "$end_msg_var"
+ echo 0 >~/.local/distro-end
+ if $pending_reboot; then
+ echo "$0: pending reboot and then finished. doing it now."
+ s reboot now
+ else
+ echo "$0: $(date): ending now)"
+ fi
+ exit 0
}
-
+pre="${0##*/}:"
+s() {
+ printf "s %s\n" "$*"
+ SUDOD="$PWD" sudo -i "$@";
+}
+sd() {
+ s dd of="$1" 2>/dev/null
+}
+m() { printf "$pre %s\n" "$*"; "$@"; }
+e() { printf "$pre %s\n" "$*"; }
+err() { echo "[$(date +'%Y-%m-%d %H:%M:%S%z')]: $0: $*" >&2; }
distro=$(distro-name)
-
+codename=$(debian-codename)
+codename_compat=$(debian-codename-compat)
pending_reboot=false
-
+sed="sed --follow-symlinks"
# template
case $distro in
esac
+#### initial packages
pup
+if isdeb; then
+ pi aptitude
+fi
-simple_packages=(
- htop
- mailutils
- nmon
- rdiff-backup
- ruby
- ruby-rest-client
- tree
- vim
-)
+# avoid prompts
+s debconf-set-selections <
+# AllowOverride None
+# AuthType basic
+# AuthName "Authentication Required"
+# # setup one time, with root:www-data, 640
+# AuthUserFile "/etc/prometheus-htpasswd"
+# Require valid-user
+#
+# EOF
+# fi
+
+
+######### begin flidas pinned packages ######
+case $(debian-codename) in
+ # needed for debootstrap scripts for fai since fai requires debian
+ flidas)
+ curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
+ sd /etc/apt/preferences.d/flidas-xenial </dev/null </dev/null; then
+ s apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
+ sd /etc/apt/preferences.d/flidas-bionic <$t <$t <$t < '127.0.0.1,192.168.1.*',
-'rpc-authentication-required' => false,
-'incomplete-dir' => '/i/k/partial-torrents',
-'download-dir' => '/i/k/torrents',
-"speed-limit-up" => 700,
-"speed-limit-up-enabled" => true,
-"ratio-limit" => 1.4000,
-"ratio-limit-enabled" => true,
-})) + "\n")
+
+
+ # requested from linode via a support ticket.
+ # https://www.linode.com/docs/networking/an-overview-of-ipv6-on-linode/
+ # ipv6 stuff pieced together
+ # via slightly wrong information from
+ # https://github.com/angristan/openvpn-install/blob/master/openvpn-install.sh
+ # https://community.openvpn.net/openvpn/wiki/IPv6
+ # and man openvpn
+
+ m vpn-server-setup -rd 2600:3c00:e000:280::1/64 2600:3c00::f03c:91ff:feb4:0bf3
+ s tee /etc/openvpn/client-config/mail <<'EOF'
+ifconfig-push 10.8.0.4 255.255.255.0
+ifconfig-ipv6-push 2600:3c00:e000:280::2/64
EOF
- sgo transmission-daemon
- ;;
- arch)
- # todo, setup it's config file & daemon
- pi transmission-cli
- ;;
- esac
-fi
-# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
-if ! getent passwd debian-transmission > /dev/null; then
- case $distro in
- arch)
- s useradd \
- --system \
- --create-home \
- --home-dir /var/lib/transmission-daemon \
- --shell /bin/false \
- debian-transmission
- ;;
- *)
- s adduser --quiet \
- --system \
- --group \
- --no-create-home \
- --disabled-password \
- --home /var/lib/transmission-daemon \
- debian-transmission
- ;;
- esac
-fi
+ if [[ -e /lib/systemd/system/openvpn-server@.service ]]; then
+ vpn_service=openvpn-server@server
+ else
+ vpn_service=openvpn@server
+ fi
-# dunno why it's there, but get rid of it
-case $HOSTNAME in
- li|lj) s rm -rf /home/linode ;;
-esac
+ sudo dd of=/etc/systemd/system/vpnmail.service <
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
-case $distro in
- debian|ubuntu)
- pi-nostart openvpn
- # pi-nostart this doesnt seem to be good enough?
- ser disable openvpn@client
- ser disable openvpn
- ;;
- # suggests because we want the resolvconf package
- *) pi --install-suggests openvpn;;
-esac
-pi wget
-case $HOSTNAME in
- tp|frodo)
- case $distro in
- debian|ubuntu)
- log=$(mktemp)
- cd /a/opt
- wget -nv -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
- errallow
- set -o pipefail
- s dpkg -i google-chrome-stable_current_amd64.deb |& tee $log
- code=$?
- errcatch
- case $code in
- 0) : ;;
- *)
- # previously I had a more specific search, but dpkg
- # changed it's output as of 7/2016
- if grep 'dependency problems' \
- $log &>/dev/null; then
- s apt-get -fy install
- else
- exit 1
- fi
- ;;
-esac
-;;
-arch)
- pi google-chrome
- ;;
-esac
-;;
-esac
-# printer
-case $distro in
- arch)
- pi cups ghostscript gsfonts # from arch wiki cups page
- pi hplip # from google
- s gpasswd -a $USER sys # from arch wiki
- sgo org.cups.cupsd.service
- # goto http://127.0.0.1:631
- # administration tab, add new printer button.
- # In debian, I could use hte recommended driver,
- # in arch, I had to pick out the 6L driver.
- ;;
- debian|ubuntu)
- spa hplip
- ;;
- # other distros unknown
-esac
+ ###### begin znc setup #####
+ pi znc
+ # https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart after cert change.
+ # to get into the web interface,
+ # then use non-main browser or else it doebsn't allow it based on ocsp stapling from my main site.
+ # https://iankelling.org:12533/
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
-case $distro in
- ubuntu|debian) pi --no-install-recommends mairix notmuch ;;
- fedora|arch) spa mairix notmuch ;;
-esac
-case $distro in
- arch) spa nfs-utils ;;
- ubuntu|debian) spa nfs-client ;;
-esac
-case $distro in
- ubuntu|debian) spa par2 ;;
- arch|fedora) spa par2cmdline ;;
-esac
+ # znc config generated by doing
+ # znc --makeconf
+ # selected port is also used in erc config
+ # comma separated channel list worked.
+ # while figuring things out, running znc -D for debug in foreground.
+ # to exit and save config:
+ # /msg *status shutdown
+ # configed auth on freenode by following
+ # https://wiki.znc.in/Sasl:
+ # /msg *sasl RequireAuth yes
+ # /msg *sasl Mechanism PLAIN
+ # /msg *sasl Set ident_name password
+ # created the system service after, and had to do
+ # mv /home/iank/.znc/* /var/lib/znc
+ # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
+ # and made a copy of the config files into /p/c
+ # /msg *status LoadMod --type=global log -sanitize
+ # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
+ # /msg *status LoadMod --type=network perform
+ # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
+ # /msg *perform add JOIN #fsf-office
+ #
+ # i set Buffer = 500
+ # also ran /znc LoadMod clearbufferonmsg
+ # it would be nice if erc supported erc query buffers by doing
+ # /msg *status clearbuffer /dev/null <<'EOF'
+[Unit]
+Description=ZNC, an advanced IRC bouncer
+After=network-online.target
-# needed for my tex resume
-case $distro in
- ubuntu|debian) spa texlive-full ;;
- arch) spa texlive-most ;;
- # fedora unknown
-esac
+[Service]
+ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
+User=znc
-case $distro in
- ubuntu)
- # flash, unrar, codecs, ms fonts.
- # This has a manual prompt.
- spa ubuntu-restricted-extras
- ;;
- fedora)
- pi yum-utils
- # rpm fusion recommended codecs
- s su -c "yum localinstall -y --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
- pi gstreamer-plugins-ugly gstreamer-plugins-bad gstreamer-ffmpeg\
- xine-lib-extras-freeworld
- ;;
-esac
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ # avoid restarting if possible, reconnecting to irc is annoying.
+ if [[ $(ser is-active znc) != active ]]; then
+ m sgo znc
+ fi
+ ###### stop znc setup #####
-case $distro in
- # optional dep for firefox for h.264 video
- arch) spa gst-libav ;;
- # other distros, probably come by default
+ end
+ ;;
esac
+###### end website setup
-case $distro in
- fedora|ubuntu|debian) spa gnupg-agent ;;
- arch) : ;;
+########### end section including li/lj ###############
+
+#### desktop stuff
+case $codename_compat in
+ xenial)
+ # mate-indicator-applet and beyond are msc things I noticed diffing a
+ # standard install with mine.
+ pi xorg lightdm mate-desktop-environment mate-desktop-environment-extras mate-indicator-applet anacron
+ ;;
+ stretch)
+ pi task-mate-desktop
+ ;;
+ buster)
+ # mate doesnt have wayland support yet
+ pi task-gnome-desktop
+ ;;
esac
-case $distro in
- fedora) spa pinentry-gtk ;;
- *) : ;; # comes default or with other packages
-esac
-case $distro in
- arch) spa firefox pulseaudio;;
- *) : ;; # comes default or with other packages
-esac
+# TODO: some of the X programs can be removed from pall when using wayland
-case $distro in
- arch) spa ttf-dejavu;;
- debian|ubuntu) spa fonts-dejavu ;;
- # others unknown
-esac
+# depends gcc is a way to install suggests. this is apparently the only
+# way to install suggests even if the main package is already
+# installed. reinstall doesn't work, uninstalling can cause removing
+# dependent packages.
+pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $(apt-cache depends gcc|grep -i suggests:| awk '{print $2}') $($src/distro-pkgs)
-case $distro in
- arch) spa xorg-xev;;
- debian|ubuntu) spa x11-utils ;;
- # others unknown
-esac
+m sgo fsf-vpn-dns-cleanup
-case $distro in
- arch) pi virt-install;;&
- debian|ubuntu) pi virtinst ;;&
- *) pi virt-manager ;; # creates the libvirt group in debian at least
- # others unknown
-esac
-# allow user to run vms, from debian handbook
-for x in ian traci; do s usermod -a -G libvirt,kvm $x; done
-# bridge networking as user fails. google lead here, but it doesn't work:
-# oh well, I give up.
-# http://wiki.qemu.org/Features-Done/HelperNetworking
-# s mkdir /etc/qemu
-# f=/etc/qemu/bridge.conf
-# s dd of=$f <<'EOF'
-# allow br0
+
+# website is dead june 14 2019. back in october, but meh
+s rm -fv /etc/apt/sources.list.d/iridium-browser.list
+# case $distro in
+# debian)
+# pi chromium ;;
+# trisquel|ubuntu)
+# wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
+# t=$(mktemp)
+# cat >$t < /dev/null; then
+ s groupadd -g 450 debian-transmission
+ s adduser --quiet \
+ --gid 450 \
+ --uid 450 \
+ --system \
+ --no-create-home \
+ --disabled-password \
+ --home /var/lib/transmission-daemon \
+ debian-transmission
+fi
+# We want group writable stuff from transmission.
+# However, after setting this, I learn that transmission sets it's
+# own umask based on it's settings file. Well, no harm leaving this
+# so it's set right from the beginning.
+s chfn debian-transmission -o umask=0002
+
+# note i had to do this, which is persistent:
+# cd /i/k
+# s chgrp debian-transmission torrents partial-torrents
+
+# syslog says things like
+# 'Failed to set receive buffer: requested 4194304, got 425984'
+# google suggets giving it even more than that
+tu /etc/sysctl.conf<<'EOF'
+net.core.rmem_max = 67108864
+net.core.wmem_max = 16777216
EOF
- # had this fail with 'Failed to connect to bus: No such file or directory'
- # then when I tried it manually, it worked fine...
- if ! systemctl --user daemon-reload; then
- sleep 2
- echo retrying systemd user daemon reload
- systemctl --user daemon-reload
- fi
- ;;&
- *)
- # taken from arch wiki.
- s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
+s sysctl -p
+
+# some reason it doesn\'t seem to start automatically anyways
+pi-nostart transmission-daemon
+# be extra sure its not started
+ser disable transmission-daemon
+ser stop transmission-daemon
+
+# the folder was moved here after an install around 02/2017.
+# it contains runtime data,
+# plus a simple symlink to the config file which it\'s
+# not worth separating out.
+# between comps, the uid can change
+f=/i/transmission-daemon
+s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
+if [[ -e $f ]]; then
+ s chown -R debian-transmission:debian-transmission $f
+fi
+for f in /i/k/partial-torrents /i/k/torrents; do
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:user2 $f
+ fi
+done
+s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
+#
+# config file documented here, and it\'s the same config
+# for daemon vs client, so it\'s documented in the gui.
+# https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
+#
+# I originaly setup rpc-whitelist, but after using
+# routing to a network namespace, it doesn\'t see the
+# real source address, so it\'s disabled.
+#
+# Changed the cache-size to 256 mb, reduces disk use.
+# It is a read & write cache.
+#
+s ruby <<'EOF'
+require 'json'
+p = '/etc/transmission-daemon/settings.json'
+File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
+'rpc-whitelist-enabled' => false,
+'rpc-authentication-required' => false,
+'incomplete-dir' => '/i/k/partial-torrents',
+'incomplete-dir-enabled' => true,
+'download-dir' => '/i/k/torrents',
+"speed-limit-up" => 800,
+"speed-limit-up-enabled" => true,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
+"ratio-limit-enabled" => true,
+})) + "\n")
+EOF
+####### end transmission
+
+
+
+# trisquel 8 = openvpn, debian stretch = openvpn-client
+vpn_ser=openvpn-client
+if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
+ vpn_ser=openvpn
+fi
+
+sd /etc/systemd/system/transmission-daemon-nn.service </dev/null) || continue
+ if [[ ! $uid -ge 1000 ]]; then
+ continue
+ fi
+ d=$f/.config/transmission-remote-gtk
+ s -u $u mkdir -p $d
+ s -u $u dd of=$d/config.json < x.html
-EOF
-
-
-if [[ $HOSTNAME == treetowl ]] && ! sudo test -e /etc/openvpn/client.key; then
- /a/bin/vpn-setup/vpn-mk-client-cert dopub
+# make networkmanager use resolvconf instead of its own dnsmasq which
+# conflicts with the normal dnsmasq package.
+f=/etc/NetworkManager/NetworkManager.conf
+m=$(md5sum $f)
+s sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
+if [[ $m != $(md5sum $f) ]]; then
+ srestart NetworkManager
fi
+# make my /etc/fonts/conf.d/ get used.
+# I have a new sans-serif font there because the default one
+# displays l and I as the same char, grrrrr.
+s fc-cache
-case $distro in
- debian|ubuntu)
- case `debian-archive` in
- stable)
- s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
-Explanation: Allow unison-gtk to be upgraded
-Package: unison-gtk
-Pin: release a=unstable
-Pin-Priority: 500
-EOF
- # dont think using testing is needed since I figured out how to
- # deal with mismatching unison compilers, but I dont
- # see any reason to revert it, since it only installs
- # a single package which is primarily a single binary
- ;;
- esac
- pi unison/testing
- pi unison-gtk/testing # after to make it the default unison
- ;;
- arch)
- pi unison gtk2
- ;;
-esac
-
-case $distro in
- arch)
- # default is alsa, doesn\'t work with with pianobar
- s dd of=/etc/libao.conf <<'EOF'
-default_driver=pulse
-EOF
- ;;
-esac
-
-# not using it atm, and for jessie, it depends on a higher version of btrfs-tools
-# case $distro in
-# arch|debian|ubuntu) pi btrbk ;;
-# # others unknown
-# esac
-
-if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
- # fail2 ban is broken, with a workaround, per
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770171
- # ill wait a while to see if it gets fixed
- pi fail2ban
- sgo fail2ban
-fi
+m /a/bin/distro-setup/mymimes
+m sgo dynamicipupdate
+# stop autopoping windows when i plug in an android phone.
+# dbus-launch makes this work within an ssh connection, otherwise you get this message,
+# with still 0 exit code.
+# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
+m dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
-case $distro in
- debian|ubuntu) s gpasswd -a ian adm ;; #needed for reading logs
-esac
-# tor
-case $distro in
- # based on
- # https://www.torproject.org/docs/rpms.html.en
- # https://www.torproject.org/docs/debian.html.en
- # todo: figure out if the running service needs to be restarted upon updates
-
-
- # todo on fedora: setup non-dev packages
- fedora)
- s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
-[tor]
-name=Tor experimental repo
-enabled=1
-baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/$basearch/
-gpgcheck=1
-gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
-
-[tor-source]
-name=Tor experimental source repo
-enabled=1
-autorefresh=0
-baseurl=http://deb.torproject.org/torproject.org/rpm/tor-testing/fc/20/SRPMS
-gpgcheck=1
-gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
+# on grub upgrade, we get prompts unless we do this
+devs=()
+for dev in $(s btrfs fil show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
+ devs+=("$(devbyid $dev),")
+done
+devs[-1]=${devs[-1]%,} # jonied by commas
+s debconf-set-selections </dev/null; then # we are using a newer virt-install
- for v in 10 8.1 8; do
- if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
- variant=win$v
- break
- fi
- done
-fi
+m /a/bin/buildscripts/pithosfly
-if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
-
- # created account with
- # win10vmian@outlook.com, and easy to remember password
- # win 10 virtio, makes disk way way way faster
- # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
- # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
- # for installing virtio after initial install instead of with initial iso:
- # qemu-img create -f qcow2 fake.qcow2 1G
- # --disk=/a/images/virtio-win.iso,device=cdrom \
- # --disk=/a/images/fake.qcow2,bus=virtio
- # Also,
- # went to device manager, saw 2 pci devices with yellow !,
- # did search for drivers, pick cdrom location, done.
- #
- # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
- # google said there was a control panel option for it, but
- # that turned out to be a lie.
- # Put this in a .bat file and run as administrator to turn off
- # hyberboot which fucks things up.
- # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
- # power settings, turn off display: never
- # run "control userpasswords2", turn on automatic login.
- # note: when changing devices, I just undefine, the create the vm again.
-
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
-
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
-fi
+# # Based on guix manual instructions, also added code to profile.
+# # disabled since i'm not using it now.
+# pi nscd
+# if ! type -p guix >/dev/null; then
+# cd $(mktemp -d)
+# wget https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh
+# # added some stuff to envonment.sh for profile based on
+# # manual instructions
+# # wget https://sv.gnu.org/people/viewgpg.php?user_id=15145 -qO - | gpg --import -
+# # echo is to get past prompt
+# yes | sudo -E HOME=$HOME bash guix-install.sh || [[ $? == 141 ]]
+# guix install glibc-utf8-locales
+# guix package --install guile
+# fi
-if [[ $HOSTNAME == treetowl ]]; then
- pi samba
- # note samba re-reads it\'s config every 1 minute
- case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
- esac
- # add 2 lines after workgroup option
- s sed -ri --follow-symlinks '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
- s sed -ri --follow-symlinks '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
- s sed -i --follow-symlinks 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
- # remove default homes section. not sharing that.
- s sed -ri --follow-symlinks '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-
- if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
-[public]
- guest ok = yes
- read only = no
- path = /kr
-EOF
- fi
+pi tor
+m /a/bin/buildscripts/tor-browser
- case $distro in
- debian|ubuntu)
- # systemd claims it generates units from /etc/init.d, but it
- # clearly doesn\'t in debian. I have no idea how they are
- # related. fuck debian right now. It\'s not documented. samba
- # has a systemd init file linked to /dev/null. There\'s this
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
- # claims samba\'s sub-services will be started automatically by
- # systemd... it didn\'t on install, wonder if it will on
- # boot. It clued me in how to start it manually though. Nothing
- # in /usr/share/doc/samba, debian admin guide says nothing about
- # any of this. (this is in debian testing as of 4/2016).
-
- s /etc/init.d/samba start
- ;;
- arch)
- sgo samba
- ;;
- esac
-fi
-
-tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
+# nfs server
+pi-nostart nfs-kernel-server
+# networkmanager has this nasty behavior on flidas: if the machine
+# crashes with dnsmasq running, on subsequent boot, it adds an entry to
+# resolvconf for 127.0.0.1 in some stupid attempt to restore
+# nameservers.
+# This can be manually fixed by stoping dnsmasq,
+# then based on whats in /run/dnsmasq/, i see we can run
+# s resolvconf -d NetworkManager
+# oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
+ser stop NetworkManager
+ser disable NetworkManager
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-mountpoint /mnt/root || s mount /mnt/root
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- mountpoint /mnt/iroot || s mount /mnt/iroot
+if [[ $HOSTNAME == frodo ]]; then
+ # nohide = export filesystems mounted deeper than the export point
+ # fsid=0 makes this export the "root" export
+ # not documented in the man page, but this means
+ # 1. it can be mounted with a shorthand of server:/
+ # 2. exports that are subdirectories of this one will automatically be mounted
+ tu /etc/exports <<'EOF'
+/k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
+EOF
+ s exportfs -rav
fi
-######### begin stuff belonging at the end ##########
-# Apps we want to override others for default file handler:
-# simplest way in debian is to just install them last.
-simple_packages+=(
- mpv
-)
-case $distro in
- ubuntu|debian)
- spa spacefm-gtk3 ;;
- arch)
- spa spacefm ;;
-esac
+# if I was going to create a persistent vm, i might do it like this:
+# variant=something # from: virt-install --os-variant list
+# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ # -n some_name --import --os-variant $variant --cpu host-model-only
-pi "${simple_packages[@]}"
+######### begin stuff belonging at the end ##########
-if $pending_reboot; then
- echo "$0: pending reboot and then finished. doing it now."
- s reboot now
-else
- echo "$0: $(date): ending now)"
-fi
+end