X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;ds=sidebyside;f=distro-end;h=84566b89fa4299468c147d69bd2e60ee97911166;hb=6561b24248188e5bce423acab25c2c14c7e5ce6d;hp=4056d055a125deda49ac4aa47081086580454864;hpb=b6c42f4134e3825cfa5980901187dad527991d43;p=distro-setup
diff --git a/distro-end b/distro-end
index 4056d05..84566b8 100755
--- a/distro-end
+++ b/distro-end
@@ -1,605 +1,1582 @@
#!/bin/bash -l
# Copyright (C) 2016 Ian Kelling
-# This program is under GPL v. 3 or later, see
-set -eE -o pipefail
-trap 'echo "$0:$LINENO:error: \"$BASH_COMMAND\" returned $?"' ERR
-set -x
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
-end_msg() {
- = local y
- IFS= read -r -d '' y ||:
- end_msg_var+="$y"
-}
+# http://www.apache.org/licenses/LICENSE-2.0
-distro=$(distro-name)
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+### setup
+source /a/bin/errhandle/err
+src="$(readlink -f -- "$BASH_SOURCE")"; src=${src%/*} # directory of this file
+source $src/pkgs
+
+set -x
+exec &> >(sudo tee -a /var/log/distro-end)
+echo "$0: $(date): starting now)"
+# see example of usage to understand.
+end_msg() {
+ local y
+ IFS= read -r -d '' y ||:
+ end_msg_var+="$y"
+}
+die() {
+ printf "$0: %s\n" "$*" >&2; exit 1
+}
+spa() { # simple package add
+ simple_packages+=($@)
+}
+distro=$(distro-name)
+codename_compat=$(debian-codename-compat)
+pending_reboot=false
+sed="sed --follow-symlinks"
# template
case $distro in
esac
+#### initial packages
pup
+if isdeb; then
+ pi aptitude
+fi
-# universal packages
-simple_packages=(
- bwm-ng
- chromium
- duplicity
- evince
- fdupes
- filelight
- gdb
- gnome-screenshot
- mailutils
- meld
- mpv
- nmon
- offlineimap
- p7zip
- paprefs
- pavucontrol
- pianobar
- pidgin
- rdiff-backup
- slock
- smartmontools
- squashfs-tools
- tcpdump
- tree
- vim
-)
+# avoid ptompts!
+s debconf-set-selections < /dev/null; then
+ # this condition is just a speed optimization
+ pi apt-file
+ s apt-file update
+fi
+
+# disable motd junk.
case $distro in
- ubuntu|debian)
- spa spacefm-gtk3 ;;
- arch)
- spa spacefm ;;
+ debian)
+ # allows me to pipe with ssh -t, and gets rid of spam
+ # http://forums.debian.net/viewtopic.php?f=5&t=85822
+ # i'd rather disable the service than comment the init file
+ # this says disabling the service, it will still get restarted
+ # but this script doesn't do anything on restart, so it should be fine
+ s dd of=/var/run/motd.dynamic if=/dev/null
+ ;;
+ trisquel|ubuntu)
+ # this isn't a complete solution. It still shows me when updates are available,
+ # but it's no big deal.
+ s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
+ ;;
esac
+### begin docker install ####
+if isdeb; then
+ # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
+ pi software-properties-common apt-transport-https
+ curl -fsSL https://download.docker.com/linux/$(distro-name-compat)/gpg | sudo apt-key add -
+ url=https://download.docker.com/linux/$(distro-name-compat)
+ l="deb [arch=amd64] $url $codename_compat stable"
+
+ if ! grep -xFq "$l" /etc/apt/sources.list{,.d/*.list}; then
+ sudo add-apt-repository "$l"
+ p update
+ fi
+ # docker eats up a fair amount of cpu when doing nothing, so don't enable it unless
+ # we really need it.
+ pi-nostart docker-ce
+ # and docker is even more crap, it ignores that it shouldnt start
+ ser stop docker
+ ser disable docker
+ case $HOSTNAME in
+ li|lj) sgo docker ;;
+ esac
+fi
+### end docker install ####
+
+
+
+### begin certbot install ###
+if [[ $distro == debian ]]; then
+ # note, need python-certbot-nginx for nginx, but it depends on nginx,
+ # and I'm not installing nginx by default right now.
+ pi certbot python-certbot-apache
+elif [[ $codename_compat == xenial ]]; then
+ # not packaged in xenial or flidas
+ pi software-properties-common
+ l="deb http://ppa.launchpad.net/certbot/certbot/ubuntu xenial main"
+ if ! grep -xFq "$l" /etc/apt/sources.list{,.d/*.list}; then
+ s add-apt-repository -y ppa:certbot/certbot ||:
+ p update
+ fi
+ pi python-certbot-apache
+else
+ die "distro unknown for certbot"
+fi
+# make a version of the certbot timer that emails me.
+x=/systemd/system/certbot
+$sed -r -f - /lib$x.timer <<'EOF' |s dd of=/etc${x}mail.timer
+s,^Description.*,\0 mail version,
+EOF
+$sed -r -f - /lib$x.service <<'EOF' |s dd of=/etc${x}mail.service
+s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
+EOF
+ser daemon-reload
+sgo certbotmail.timer
+### end certbot install ###
+
+
+# dogcam setup. not using atm
+# case $HOSTNAME in
+# lj|li)
+# /a/bin/webcam/install-server
+# ;;
+# kw)
+# /a/bin/webcam/install-client
+# ;;
+# esac
-if [[ $HOSTNAME == frodo ]]; then
- case $distro in
- debian|ubuntu)
- # note i had to do this, which is persistent:
- # cd /i/k
- # s chgrp debian-transmission torrents partial-torrents
-
- # syslog says things like
- # 'Failed to set receive buffer: requested 4194304, got 425984'
- # google suggets giving it even more than that
- tu /etc/sysctl.conf<<'EOF'
-net.core.rmem_max = 67108864
-net.core.wmem_max = 16777216
+pi ${p1[@]}
+
+##### begin automatic upgrades ####
+# this makes it so we upgrade everything
+s debconf-set-selections <<'EOF'
+unattended-upgrades unattended-upgrades/origins_pattern string "codename=${distro_codename}";
EOF
- s sysctl -p
-
- # some reason it doesn't seem to start automatically anyways
- pi-nostart tranmission-daemon
- # config file documented here, and it's the same config
- # for daemon vs client, so it's documented in the gui.
- # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
- s ruby <<'EOF'
-require 'json'
-p = '/etc/transmission-daemon/settings.json'
-File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist': '127.0.0.1,192.168.1.*',
-'rpc-authentication-required': false,
-'incomplete-dir': '/i/k/partial-torrents',
-'download-dir': '/i/k/torrents',
-"speed-limit-up": 700,
-"speed-limit-up-enabled": true,
-"ratio-limit": 1.4000,
-"ratio-limit-enabled": true,
-})) + "\n")
+s dpkg-reconfigure -u -fnoninteractive unattended-upgrades
+
+# Setup daily reboots, so all unattended upgrades go into affect
+# unattended upgrades happen at 6 am + rand(60 min).
+echo '20 7 * * * root /usr/local/bin/zelous-unattended-reboot' | s dd of=/etc/cron.d/unattended-upgrade-reboot
+##### end automatic upgrades ####
+
+# office is not exposed to internet yet
+if [[ $(hostname -f) != *.office.fsf.org ]]; then
+ ## prometheus node exporter setup
+ web-conf -f 9100 -p 9101 apache2 $(hostname -f) <<'EOF'
+#https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
+# https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
+
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/prometheus-htpasswd"
+ Require valid-user
+
EOF
- sgo transmission-daemon
- ;;
- arch)
- # todo, setup it's config file & daemon
- pi transmission-cli
- ;;
- esac
fi
-# from /var/lib/dpkg/info/transmission-daemon.postinst
-if ! getent passwd debian-transmission > /dev/null; then
- s adduser --quiet \
- --system \
- --group \
- --no-create-home \
- --disabled-password \
- --home /var/lib/transmission-daemon \
- debian-transmission
-fi
+# website setup
+case $HOSTNAME in
+ lj|li)
+ case $HOSTNAME in
+ lj) domain=iank.bid; exit 0 ;;
+ li) domain=iankelling.org ;;
+ esac
+ /a/h/setup.sh $domain
+ /a/h/build.rb
+
+ sudo -E /a/bin/mediawiki-setup/mw-setup-script
+
+ pi-nostart mumble-server
+ s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini
+
+ # do certificate to avoid warning about unsigned cert,
+ # which is overkill for my use, but hey, I'm cool, I know
+ # how to do this.
+ web-conf apache2 mumble.iankelling.org
+ s rm -f /etc/apache2/sites-enabled/mumble.iankelling.org
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
-case $distro in
- debian|ubuntu) pi transmission-remote-gtk ;;
- arch) pi transmission-remote-gtk2 ;;
-esac
-# arch had a default config,
-# debian had nothing until you start it.
-# With a little trial an error, here is a minimal config
-# taken from the generated one, plus changes that the
-# settings ui does, without a bunch of ui crap settings.
-#
-# only settings I set were
-# hostname
-# auto-connect
-#
-for f in /home/*; do
- d=$f/.config/transmission-remote-gtk
- u=${f##*/}
- s -u $u mkdir -p $d
- s -u $u dd of=$d/config.json <<'EOF'
+ sgo mumble-server
+
+ vpn-server-setup -rd
+ s tee /etc/openvpn/client-config/mail <<'EOF'
+ifconfig-push 10.8.0.4 255.255.255.0
+EOF
+
+ # it\'s strange. docker seems to make the default for forward
+ # be drop, but then I set it to accept and it\'s stuck that way,
+ # I dun know why. But, let\'s make sure we can forward anyways.
+ s DEBIAN_FRONTEND=noninteractive pi iptables-persistent
+ rm /etc/iptables/rules.v6
+ s tee /etc/iptables/rules.v4 <<'EOF'
+*filter
+-A FORWARD -i tun+ -o eth0 -j ACCEPT
+-A FORWARD -i eth0 -o tun+ -j ACCEPT
+COMMIT
+EOF
+
+
+ sudo dd of=/etc/systemd/system/vpnmail.service <
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
+
+
+ ########## begin pump.io setup ##########
+
+ # once pump adds a logrotation script, turn off nologger,
+ # and add
+ # "logfile": "/var/log/pumpio/pumpio.log",
+ #
+ s dd of=/etc/pump.io.json <<'EOF'
{
- "profiles" : [
- {
- "profile-name" : "Default",
- "hostname" : "frodo",
- "rpc-url-path" : "/transmission/rpc",
- "username" : "",
- "password" : "",
- "auto-connect" : true,
- "ssl" : false,
- "timeout" : 40,
- "retries" : 3,
- "update-active-only" : false,
- "activeonly-fullsync-enabled" : false,
- "activeonly-fullsync-every" : 2,
- "update-interval" : 3,
- "min-update-interval" : 3,
- "session-update-interval" : 60,
- "exec-commands" : [
- ],
- "destinations" : [
- ]
- }
- ],
- "profile-id" : 0,
- "add-options-dialog" : false
+ "secret": "SECRET_REPLACE_ME",
+ "driver": "mongodb",
+ "params": { "dbname": "pumpio" },
+ "noweb": false,
+ "site": "pump.iankelling.org",
+ "owner": "Ian Kelling",
+ "ownerURL": "https://iankelling.org/",
+ "port": 8001,
+ "urlPort": 443,
+ "hostname": "pump.iankelling.org",
+ "nologger": true,
+ "datadir": "/home/pumpio/pumpdata",
+ "enableUploads": true,
+ "debugClient": false,
+ "disableRegistration": true,
+ "noCDN": true,
+ "key": "/home/pumpio/privkey.pem",
+ "cert": "/home/pumpio/fullchain.pem",
+ "address": "localhost",
+ "sockjs": false
}
EOF
-done
+ s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
+
+ # stretch node is too old
+ # https://nodejs.org/en/download/package-manager/
+ curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
+ pi nodejs graphicsmagick mongodb
+ cd /home/iank
+ if [[ -e pump.io ]]; then
+ cd pump.io
+ git pull
+ else
+ git clone https://github.com/pump-io/pump.io.git
+ cd pump.io
+ fi
+ # note: these 2 commands seem
+ # note: doing this or the npm install pump.io as root had problems.
+ npm install
+ npm run build
+ # normally, next command would be
+ # s npm install -g odb
+ # but it\'s this until a bug in pump gets fixed
+ # https://github.com/pump-io/pump.io/issues/1287
+ s npm install -g databank-mongodb@0.19.2
+ if ! getent passwd pumpio &>/dev/null; then
+ s useradd -Um -s /bin/false pumpio
+ fi
+ sudo -u pumpio mkdir -p /home/pumpio/pumpdata
+ # for testing browser when only listening to localhost,
+ # in the pump.io.json, set hostname localhost, urlPort 5233
+ #ssh -L 5233:localhost:5233 li
+
+ s mkdir -p /var/log/pumpio/
+ s chown pumpio:pumpio /var/log/pumpio/
+
+ web-conf - apache2 pump.iankelling.org <<'EOF'
+# currently a bug in pump that we cant terminate ssl
+ SSLProxyEngine On
+ ProxyPreserveHost On
+ ProxyPass / https://127.0.0.1:8001/
+ ProxyPassReverse / https://127.0.0.1:8001/
+ # i have sockjs disabled per people suggesting that
+ # it won\'t work with apache right now.
+ # not sure if it would work with this,
+ # but afaik, this is pointless atm.
+
+ ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
+ ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
+
+EOF
-case $distro in
- debian|ubuntu)
- pi-nostart openvpn
- # pi-nostart this doesn't seem to be good enough?
- ser disable openvpn@client
- ser disable openvpn
- ;;
- *) pi openvpn ;;
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
+
+ s dd of=/etc/systemd/system/pump.service <<'EOF'
+[Unit]
+Description=pump.io
+After=syslog.target network.target mongodb.service
+Requires=mongodb.service
+
+[Service]
+Type=simple
+User=pumpio
+Group=pumpio
+ExecStart=/home/iank/pump.io/bin/pump
+Environment=NODE_ENV=production
+# failed to find databank-mongodb without this.
+# I just looked at my environment variables took a guess.
+Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo pump
+ ########## end pump.io setup ############
+
+
+ ############# begin setup mastodon ##############
+
+ # main doc is Docker-Guide.md in docs repo
+
+ # I'd like to try gnu social just cuz of gnu, but it's not being
+ # well maintained, for example, simple pull requests
+ # languishing:
+ # https://git.gnu.io/gnu/gnu-social/merge_requests/143
+ # and I submitted my own bugs, basic docs are broken
+ # https://git.gnu.io/gnu/gnu-social/issues/269
+
+ # note, docker required, but we installed it earlier
+
+ # i subscrubed to https://github.com/docker/compose/releases.atom
+ # to see release notes.
+ # i had some problems upgrading. blew things away with
+ # docker-compose down
+ # docker rmi $(docker images -q)
+ # s reboot now
+ # when running docker-compose run, kernel stack traces are printed to the journal.
+ # things seem to succeed, google says nothing, so ignoring them.
+ curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
+ s chmod +x /usr/local/bin/docker-compose
+
+
+ cd ~
+ s rm -rf mastodon
+ i clone https://github.com/tootsuite/mastodon
+ cd mastodon
+ # subbed to atom feed to deal with updates
+ git checkout $(git tag | grep -v rc | tail -n1)
+
+ # per instructions, uncomment redis/postgres persistence in docker-compose.yml
+ sed -i 's/^#//' docker-compose.yml
+
+ cat >.env.production <<'EOF'
+REDIS_HOST=redis
+REDIS_PORT=6379
+DB_HOST=db
+DB_USER=postgres
+DB_NAME=postgres
+DB_PASS=
+DB_PORT=5432
+
+LOCAL_DOMAIN=mast.iankelling.org
+LOCAL_HTTPS=true
+
+SINGLE_USER_MODE=true
+
+SMTP_SERVER=mail.iankelling.org
+SMTP_PORT=25
+SMTP_LOGIN=li
+SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
+SMTP_DOMAIN=mast.iankelling.org
+SMTP_DELIVERY_METHOD=smtp
+EOF
+
+ for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
+ # 1 minute 7 seconds to run this docker command
+ # to generate a secret, and it has ^M chars at the end. wtf. really dumb
+ printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
+ done
+ found=false
+ while read -r domain port pass; do
+ if [[ $domain == mail.iankelling.org ]]; then
+ found=true
+ # remove the username part
+ pass="${pass#*:}"
+ printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
+ break
+ fi
+ done < <(s cat /etc/mailpass)
+ if ! $found; then
+ echo "$0: error, failed to find mailpass domain for mastadon"
+ exit 1
+ fi
+
+ # docker compose makes an interface named like br-8f3e208558f2. we need mail to
+ # get routed to us.
+ if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
+ s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
+ fi
+
+ docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
+ logq docker-compose run --rm web rake db:migrate
+ docker-compose run --rm web rails assets:precompile
+
+ # avatar failed to upload, did
+ # docker logs mastodon_web_1
+ # google lead me to this
+ s chown -R 991:991 public/system
+
+ # docker daemon takes care of starting on boot.
+ docker-compose up -d
+
+ s a2enmod proxy_wstunnel headers
+ web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
+ ProxyPreserveHost On
+ RequestHeader set X-Forwarded-Proto "https"
+ ProxyPass /500.html !
+ ProxyPass /oops.png !
+ ProxyPass /api/v1/streaming/ ws://localhost:4000/
+ ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
+ ErrorDocument 500 /500.html
+ ErrorDocument 501 /500.html
+ ErrorDocument 502 /500.html
+ ErrorDocument 503 /500.html
+ ErrorDocument 504 /500.html
+EOF
+
+
+ ############### !!!!!!!!!!!!!!!!!
+ ############### manual steps:
+
+ # only following a few people atm, so not bothering to figure out backups
+ # when mastodon has not documented it at all.
+ #
+ # fsf@status.fsf.org
+ # cwebber@toot.cat
+ # dbd@status.fsf.org
+ # johns@status.fsf.org
+
+ # sign in page is at https://mast.iankelling.org/auth/sign_in
+ # register as iank, then
+ # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
+ # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
+
+ ############# end setup mastodon ##############
+
+ # we use nsupdate to update the ip of home
+ pi bind9
+
+ pi znc
+ # znc config generated by doing
+ # znc --makeconf
+ # selected port is also used in erc config
+ # comma separated channel list worked.
+ # while figuring things out, running znc -D for debug in foreground.
+ # to exit and save config:
+ # /msg *status shutdown
+ # configed auth on freenode by following
+ # https://wiki.znc.in/Sasl:
+ # /msg *sasl RequireAuth yes
+ # /msg *sasl Mechanism PLAIN
+ # /msg *sasl Set ident_name password
+ # created the system service after, and had to do
+ # mv /home/iank/.znc/* /var/lib/znc
+ # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
+ # and made a copy of the config files into /p/c
+ # /msg *status LoadMod --type=global log -sanitize
+ # to get into the web interface,
+ # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
+ # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
+ # https://iankelling.org:12533/
+ # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
+ # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
+ # /msg *status LoadMod --type=network perform
+ # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
+ # /msg *perform add JOIN #fsf-office
+ #
+ # i set Buffer = 500
+ # also ran /znc LoadMod clearbufferonmsg
+ # it would be nice if erc supported erc query buffers by doing
+ # /msg *status clearbuffer /dev/null <<'EOF'
+[Unit]
+Description=ZNC, an advanced IRC bouncer
+After=network-online.target
+
+[Service]
+ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
+User=znc
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo znc
+
+ echo "$0: $(date): ending now)"
+ exit 0
+ ;;
esac
-case $HOSTNAME in
- tp|frodo)
- case $distro in
- debian|ubuntu)
- log=$(mktemp)
- cd /a/opt
- wget -N https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
- set +e
- s dpkg -i google-chrome-stable_current_amd64.deb &> $log
- code=$?
- set -e
- case $code in
- 1)
- if grep '^dpkg: dependency problems prevent configuration of' \
- $log &>/dev/null; then
- s apt-get -fy install
- else
- exit 1
- fi
- ;;
- 0) : ;;
- *) exit $code
- esac
- ;;
- arch)
- pi google-chrome
- ;;
- esac
- ;;
+########### end section including li/lj ###############
+
+
+case $(debian-codename) in
+ # needed for debootstrap scripts for fai since fai requires debian
+ flidas)
+ curl http://archive.ubuntu.com/ubuntu/project/ubuntu-archive-keyring.gpg | s apt-key add -
+ s dd of=/etc/apt/preferences.d/flidas-xenial </dev/null <$t <$t <$t <$t < /dev/null; then
+ s groupadd -g 450 debian-transmission
+ case $distro in
arch)
- pi ntp
- sgo ntpd
- ;;
- # others unknown
-esac
+ s useradd \
+ --system \
+ --create-home \
+ --gid 450 \
+ --uid 450 \
+ --home-dir /var/lib/transmission-daemon \
+ --shell /bin/false \
+ debian-transmission
+ ;;
+ *)
+ s adduser --quiet \
+ --gid 450 \
+ --uid 450 \
+ --system \
+ --no-create-home \
+ --disabled-password \
+ --home /var/lib/transmission-daemon \
+ debian-transmission
+ ;;
+ esac
+fi
+# We want group writable stuff from transmission.
+# However, after setting this, I learn that transmission sets it's
+# own umask based on it's settings file. Well, no harm leaving this
+# so it's set right from the beginning.
+s chfn debian-transmission -o umask=0002
case $distro in
- arch) spa xorg-xev;;
- debian|ubuntu) spa x11-utils ;;
- # others unknown
-esac
+ debian|trisquel|ubuntu)
+ # note i had to do this, which is persistent:
+ # cd /i/k
+ # s chgrp debian-transmission torrents partial-torrents
+
+ # syslog says things like
+ # 'Failed to set receive buffer: requested 4194304, got 425984'
+ # google suggets giving it even more than that
+ tu /etc/sysctl.conf<<'EOF'
+net.core.rmem_max = 67108864
+net.core.wmem_max = 16777216
+EOF
+ s sysctl -p
+
+ # some reason it doesn\'t seem to start automatically anyways
+ pi-nostart transmission-daemon
+ # be extra sure its not started
+ ser disable transmission-daemon
+ ser stop transmission-daemon
+
+ # the folder was moved here after an install around 02/2017.
+ # it contains runtime data,
+ # plus a simple symlink to the config file which it\'s
+ # not worth separating out.
+ # between comps, the uid can change
+ f=/i/transmission-daemon
+ s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:debian-transmission $f
+ fi
+ for f in /i/k/partial-torrents /i/k/torrents; do
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:user2 $f
+ fi
+ done
+ s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
+ #
+ # config file documented here, and it\'s the same config
+ # for daemon vs client, so it\'s documented in the gui.
+ # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
+ #
+ # I originaly setup rpc-whitelist, but after using
+ # routing to a network namespace, it doesn\'t see the
+ # real source address, so it\'s disabled.
+ #
+ # Changed the cache-size to 256 mb, reduces disk use.
+ # It is a read & write cache.
+ #
+ s ruby <<'EOF'
+require 'json'
+p = '/etc/transmission-daemon/settings.json'
+File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
+'rpc-whitelist-enabled' => false,
+'rpc-authentication-required' => false,
+'incomplete-dir' => '/i/k/partial-torrents',
+'incomplete-dir-enabled' => true,
+'download-dir' => '/i/k/torrents',
+"speed-limit-up" => 800,
+"speed-limit-up-enabled" => true,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
+"ratio-limit-enabled" => true,
+})) + "\n")
+EOF
-case $distro in
- arch) pi virt-install;;&
- debian|ubuntu) pi virtinst ;;&
- *) pi virt-manager ;; # creates the libvirt group in debian at least
- # others unknown
+ ;;
+ # todo: others unknown
esac
-# allow user to run vms, from debian handbook
-for x in ian traci; do s usermod -a -G libvirt $x; done
-# bridge networking as user fails. google lead here, but it doesn't work:
-# oh well, I give up.
-# http://wiki.qemu.org/Features-Done/HelperNetworking
-# s mkdir /etc/qemu
-# f=/etc/qemu/bridge.conf
-# s dd of=$f <<'EOF'
-# allow br0
-# EOF
-# #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
-# s chmod 640 $f
-case $distro in
- arch) spa cdrkit;;
- debian|ubuntu) spa genisoimage;;
- # others unknown
-esac
-case $distro in
- arch) spa spice-gtk3 ;;
- debian|ubuntu) spa spice-client-gtk;;
- # others unknown
-esac
+# trisquel 8 = openvpn, debian stretch = openvpn-client
+vpn_ser=openvpn-client
+if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
+ vpn_ser=openvpn
+fi
-# general known for debian/ubuntu, not for fedora
-case $distro in
- arch)
- # cdrkit for cloud-init isos
- # dnsmasq for nat networking in libvirt
- # qemu for qemu-img, bind-tools for dig
- pi unzip wget xorg-xmodmap \
- bridge-utils dnsmasq qemu bind-tools
- # otherwise we get error about accessing kvm module.
- # seems like there might be a better way, but google was a bit vague.
- s sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
- echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
- # https://bbs.archlinux.org/viewtopic.php?id=206206
- # # this should prolly go in the wiki
- sgo virtlogd.socket
- sgo virtlogd.service
- ;;
-esac
+s dd of=/etc/systemd/system/transmission-daemon-nn.service </dev/null; then
+ cd $(mktemp -d)
+ # just the latest stable at the time of writing
+ # TODO, maybe put this all into a build script,
+ # and do some automatic updates
+ wget -q https://dl.google.com/go/go1.12.4.linux-amd64.tar.gz
+ s tar -C /usr/local -xzf go1.12.4.linux-amd64.tar.gz
+ rm -f ./*
+ fi
+ go get -u mvdan.cc/fdroidcl
+ # a bit of googling, and added settings to bashrc
+ ;;
esac
-
case $distro in
- debian|ubuntu) spa android-tools-adb ;;
- arch) spa android-tools ;;
- # other distros unknown
+ arch)
+ pi virt-install
+ # otherwise we get error about accessing kvm module.
+ # seems like there might be a better way, but google was a bit vague.
+ s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
+ echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
+ # guessing this is not needed
+ #sgo virtlogd.service
+
+ # iank: disabed as im not using libvirt usually
+ # # https://bbs.archlinux.org/viewtopic.php?id=206206
+ # # # this should prolly go in the wiki
+ # sgo virtlogd.socket
+ # sgo libvirtd
+ ;;
+ debian|trisquel|ubuntu)
+ pi-nostart virtinst virt-manager
+ ;;
+
esac
case $distro in
- fedora) spa unrar ;;
- *) spa unrar-free ;;
+ fedora)
+ cd $(mktemp -d)
+ wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
+ ex global*
+ cd global-6.5.7
+ # based on https://github.com/leoliu/ggtags
+ ./configure --with-exuberant-ctags=/usr/bin/ctags
+ make
+ s make install
+ pip install pygments
+ ;;
+ *)
+ pi global
+ ;;&
+ arch)
+ pi python2-pygments
+ ;;
+ debian|trisquel|ubuntu)
+ pi python-pygments
+ ;;
esac
-# proprietary flash. going without for now
-# case $distro in
-# debian)
-# pi flashplugin-nonfree
-# esac
+# removed synergy since ive not used it in a long time
-case $distro in
- fedora)
- cd $(mktemp -d)
- wget http://tamacom.com/global/global-6.3.2.tar.gz
- ex global*
- cd global-6.3.2
- # based on https://github.com/leoliu/ggtags
- ./configure --with-exuberant-ctags=/usr/bin/ctags
- make
- s make install
- s pip install pygments
- ;;
- *)
- pi global
- ;;&
- arch)
- pi python2-pygments
- ;;
- debian|ubuntu)
- pi python-pygments
- ;;
-esac
+pi --no-install-recommends kdeconnect
+### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
+### but gnome + xmonad not working in flidas, so i disabled it
+# pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
+# cd /a/opt/indicator-kdeconnect
+# mkdir -p build
+# cd build
+# cmake .. -DCMAKE_INSTALL_PREFIX=/usr
+# make
+# sudo make install
+# # we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
+# # it seems, according to
+# # /etc/xdg/autostart/kdeconnectd.desktop
+# # I'm not seeing the icon, but the clipboard replication is working
-# leave this for last so it doesn't do a bunch of other apps
-# which I want explicitly installed in case I switch DE's
+### model 01 arduino support ###
+# https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
+# also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
+# set arduino var in bashrc,
+# have system config file setup too.
+sudo adduser $USER dialout
case $distro in
- debian)
- pi task-cinnamon-desktop
- # in settings, change scrolling to two-finger,
- # because the default edge scroll doesn\'t work.
- ;;
- # others unknown
-esac
-
-case $distro in
- arch) spa apg ;;
-
- # already in debian jessie
+ arch)
+ sudo usermod -a -G uucp $USER
+ ;;
esac
-pi "${simple_packages[@]}"
+# this is for the mail command too. update-alternatives is kind of misleading
+# since at least it's main commands pretend mail does not exist.
+# bsd's mail got pulled in on some dumb dependency, i dunno how.
+s update-alternatives --set mailx /usr/bin/mail.mailutils
######### end misc packages #########
-# packages I once used before and liked, but don't want installed now for
+# packages I once used before and liked, but don\'t want installed now for
# various reasons:
# python-sqlite is used for offlineimap
# lxappearance python-sqlite dolphin paman dconf-editor
@@ -609,6 +1586,8 @@ pi "${simple_packages[@]}"
######## unfinished
# todo, finish configuring smart.
+
+pi smartmontools
# mostly from https://wiki.archlinux.org/index.php/S.M.A.R.T.
# turn on smart. background on options:
# first line, -a = test everyting on all devices.
@@ -617,8 +1596,8 @@ pi "${simple_packages[@]}"
# -o on, turn on 4 hour period non-performance degrading testing.
# short test daily 2-3am, extended tests Saturdays between 3-4am:
sched="-s (S/../.././02|L/../../6/03)"
-s sed -i "s#^[[:space:]]*DEVICESCAN.*#\
-DEVICESCAN -a -o on -S on -n standby,q $sched\
+s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
+DEVICESCAN -a -o on -S on -n standby,q $sched \
-m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
# in the default configuration of at least ubuntu 14.04, resolvconf is
@@ -627,7 +1606,7 @@ DEVICESCAN -a -o on -S on -n standby,q $sched\
# consulted first. This is often slower and undesirable, ie. local dns
# queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
# can do:
-#sudo sed -i '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
+#sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
# however, this breaks dns lookup for hosts on the openvpn lan.
# I can\'t figure out why hosts on the normal lan would not be
# broken under the default ordering, except the host I was
@@ -637,186 +1616,138 @@ DEVICESCAN -a -o on -S on -n standby,q $sched\
########### misc stuff
-if [[ $HOSTNAME == frodo ]]; then
- tu /etc/exports <<'EOF'
-/k 192.168.1.0/24(rw,nohide,no_subtree_check,insecure)
-EOF
- s exportfs -ra
+# make networkmanager use resolvconf instead of its own dnsmasq which
+# conflicts with the normal dnsmasq package.
+f=/etc/NetworkManager/NetworkManager.conf
+m=$(md5sum $f)
+s sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
+if [[ $m != $(md5sum $f) ]]; then
+ srestart NetworkManager
fi
-if [[ `debian-archive` == stable ]]; then
- s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
-Explanation: Allow unison-gtk to be upgraded
-Package: unison-gtk
-Pin: release a=unstable
-Pin-Priority: 500
-EOF
-fi
+# make my /etc/fonts/conf.d/ get used.
+# I have a new sans-serif font there because the default one
+# displays l and I as the same char, grrrrr.
+s fc-cache
-case $distro in
- arch)
- # default is alsa, doesn\'t work with with pianobar
- s dd of=/etc/libao.conf <<'EOF'
-default_driver=pulse
-EOF
- ;;
-esac
+/a/bin/distro-setup/mymimes
-case $distro in
- arch|debian|ubuntu) pi btrbk ;;
- # others unknown
-esac
-
-if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
- # fail2 ban is broken, with a workaround, per
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770171
- # ill wait a while to see if it gets fixed
- pi fail2ban
- sgo fail2ban
-fi
+sgo dynamicipupdate
+# stop autopoping windows when i plug in an android phone.
+# dbus-launch makes this work within an ssh connection, otherwise you get this message,
+# with still 0 exit code.
+# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
+dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
-# disable motd junk.
-case $(distro-name) in
- debian)
- # allows me to pipe with ssh -t, and gets rid of spam
- # http://forums.debian.net/viewtopic.php?f=5&t=85822
- # i'd rather disable the service than comment the init file
- # this says disabling the service, it will still get restarted
- # but this script doesn't do anything on restart, so it should be fine
- s dd of=/var/run/motd.dynamic if=/dev/null
- s update-rc.d motd disable
- ;;
- ubuntu)
- # this isn't a complete solution. It still shows me when updates are available,
- # but it's no big deal.
- s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
- ;;
-esac
-# automatic updates
-# reference:
-# https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
-# /etc/cron.daily/apt calls unattended-upgrades
-# /usr/share/doc/unattended-upgrades# cat README.md
-# /etc/apt/apt.conf.d/50unattended-upgrades
-if isdebian; then
- pi unattended-upgrades
- s dd of=/etc/apt/apt.conf.d/10periodic <<'EOF'
-# this file was mostly just comments.
-APT::Periodic::Update-Package-Lists "1";
-APT::Periodic::Download-Upgradeable-Packages "1";
-APT::Periodic::AutocleanInterval "7";
-APT::Periodic::Unattended-Upgrade "1";
-EOF
- { cat <<'EOF'
-Unattended-Upgrade::Mail "root";
-Unattended-Upgrade::MailOnlyOnError "true";
-Unattended-Upgrade::Remove-Unused-Dependencies "true";
-Unattended-Upgrade::Origins-Pattern {
-# default is just upgrade main and security, not updates.
-EOF
- if isdebian-testing; then
- cat <<'EOF'
-# for testing, only do security updates.
- "origin=Debian,codename=${distro_codename},label=Debian-Security";
-EOF
- else
- cat <<'EOF'
-# These are stable packages only getting bugfixes anyways.
- "origin=*";
-EOF
- cat <<'EOF'
-};
+# on grub upgrade, we get prompts unless we do this
+devs=()
+for dev in $(s btrfs fil show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
+ devs+=($(devbyid $dev),)
+done
+devs[-1]=${devs[-1]%,} # jonied by commas
+s debconf-set-selections < /tmp/x
-fi
+# btrfs maintenance
+sgo btrfsmaint.timer
+sgo btrfsmaintstop.timer
-######### begin postfix ########
-# based on,http://www.postfix.org/qmgr.8.html and my notes in gnus
-# originally tried moving specific directories under /var/spool/postfix,
-# but postfix didn't like that
-if [[ ! -L /var/spool/postfix ]]; then
- ser stop postfix
- n=/q/postfix-`distro-name``debian-archive`
- if [[ -e $n ]]; then
- echo "$0: error: /q/postfix exists but not the link to it"
- exit 1
- fi
- s mv /var/spool/postfix $n
- s lnf -T $n /var/spool/postfix
- ser start postfix
- journalctl -n 20 | cat
-fi
+# the wiki backup script from ofswiki.org uses generic paths
+s lnf /p/c/machine_specific/li/mw_vars /root
+s lnf /k/backup/wiki_backup /root
-# This also works instead of ~/.forward
-# s sed -i '/^root/d' /etc/aliases ||:
-#echo "root: $HOSTNAME@bog.mm.st" | s tee -a /etc/aliases
-# this can't be a symlink and has permission restrictions
-# it might work in /etc/aliases, but this seems more proper.
-
-if s grep amazonaws /etc/postfix/sasl_passwd &>/dev/null; then
- forward=$HOSTNAME@sallymae.club
-else
- forward=$HOSTNAME@bog.mm.st
-fi
-e $forward > ~/.forward
-e $forward | s tee /root/.forward
-s newaliases
-
-# if I wanted the from address to be renamed and sent to a different address,
-# echo "sdx@localhost development@localhost" | sudo dd of=/etc/postfix/recipient_canonical
-# sudo postmap hash:/etc/postfix/recipient_canonical
-# sudo service postfix reload
-
-
-# i'm assuming mail just won't work on systems without the sasl_passwd.
-postconfin <<'EOF'
-smtp_sasl_auth_enable = yes
-smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd
-smtp_sasl_security_options = noanonymous
-smtp_tls_security_level = secure
-message_size_limit = 20480000
-smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
-EOF
-# ^ I ran into a log file not sending cuz of size. double from 10 to 20 meg limit
+case $distro in
+ trisquel|ubuntu|debian)
+ # unison-gtk second, i want it to be default, not sure if that works
+ # with spa. note, I used to install from testing repo when using stable,
+ # but it shouldn't be needed since I wrote a script to handle mismatching
+ # compilers.
+ spa unison unison-gtk
+ ;;
+ arch)
+ spa unison gtk2
+ ;;
+esac
-s postmap hash:/etc/postfix/sasl_passwd
-# offlineimap uses this too, it is much easier to use one location than to
-# condition it's config and postfix's config
case $distro in
- fedora) s lnf -T ca-certificates.crt /etc/ssl/ca-bundle.trust.crt ;;
- *) :
+ arch)
+ # default is alsa, doesn\'t work with with pianobar
+ s dd of=/etc/libao.conf <<'EOF'
+default_driver=pulse
+EOF
+ ;;
esac
-s service postfix reload
-sgo postfix
+# # disabled due to my patch being in btrbk
+# case $distro in
+# arch|debian|trisquel|ubuntu) pi btrbk ;;
+# # others unknown
+# esac
+cd /a/opt/btrbk
+s make install
-############ end postfix #######
+sgo btrbk.timer
+# note: to see when it was last run,
+# ser list-timers
+end_msg <<'EOF'
+In mate settings settings, change scrolling to two-finger,
+because the default edge scroll doesn\'t work. Originally found this in debian.
+EOF
+
case $distro in
- debian|ubuntu) s gpasswd -a ian adm ;; #needed for reading logs
+ debian)
+ # remove dep that came in with desktop
+ pu transmission-gtk
+ ;;
esac
-# tor
+
case $distro in
- # based on
- # https://www.torproject.org/docs/rpms.html.en
- # https://www.torproject.org/docs/debian.html.en
- # todo: figure out if the running service needs to be restarted upon updates
+ debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
+esac
+/a/bin/buildscripts/pithosfly
+
+
+# based on guix manual instructions, also added code to profile
+pi nscd
+if ! type -p guix >/dev/null; then
+ cd $(mktemp -d)
+ wget https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh
+ # added some stuff to envonment.sh for profile based on
+ # manual instructions
+ # wget https://sv.gnu.org/people/viewgpg.php?user_id=15145 -qO - | gpg --import -
+ # echo is to get past prompt
+ yes | sudo -E HOME=$HOME bash guix-install.sh || [[ $? == 141 ]]
+ guix install glibc-utf8-locales
+ guix package --install guile
+fi
- # todo on fedora: setup non-dev packages
- fedora)
- s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
+# install rust.
+curl https://sh.rustup.rs -sSf | bash -s -- -y
+# todo: update this. updates in rust are stupidly complicate
+if ! which rg &>/dev/null; then
+ cargo install ripgrep
+fi
+
+#### tor
+case $distro in
+ # based on
+ # https://www.torproject.org/docs/rpms.html.en
+ # https://www.torproject.org/docs/debian.html.en
+ # todo: figure out if the running service needs to be restarted upon updates
+ # todo on fedora: setup non-dev packages
+ fedora)
+ s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
[tor]
name=Tor experimental repo
enabled=1
@@ -833,35 +1764,35 @@ gpgcheck=1
gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
EOF
- # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
- # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
- sgo tor
- /a/bin/buildscripts/tor-browser
- ;;
- ubuntu)
- tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
- gpg --keyserver keys.gnupg.net --recv 886DDD89
- gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
- p update
- pi deb.torproject.org-keyring
- pi tor
- /a/bin/buildscripts/tor-browser
- ;;
- debian)
- pi tor
- /a/bin/buildscripts/tor-browser
- ;;
- arch)
- pi tor tor-browser-en
- sgo tor
- ;;
- # ubuntu unknown
+ # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
+ # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
+ sgo tor
+ /a/bin/buildscripts/tor-browser
+ ;;
+ ubuntu)
+ tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
+ gpg --keyserver keys.gnupg.net --recv 886DDD89
+ gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
+ p update
+ pi deb.torproject.org-keyring
+ pi tor
+ /a/bin/buildscripts/tor-browser
+ ;;
+ debian)
+ pi tor
+ /a/bin/buildscripts/tor-browser
+ ;;
+ arch)
+ pi tor tor-browser-en
+ sgo tor
+ ;;
+ # ubuntu unknown
esac
# nfs server
case $distro in
- fedora)
- end_msg <<'EOF'
+ fedora)
+ end_msg <<'EOF'
fedora todo: disable the firewall or find a way to automate it.
there's an unused section in t.org for tramikssion firewall setup
@@ -878,154 +1809,60 @@ make sure to reload the firewall to load the persistent configuration
EOF
- pi nfs-utils
- sgo nfs-server
- ;;
- debian|ubuntu)
- pi nfs-server
- ;;
- arch)
- pi nfs-utils
- sgo rpcbind
- sgo nfs-server
- ;;
-esac
-
-if [[ -e /i/video ]]; then
- # nohide = export filesystems mounted deeper than the export point
- # fsid=0 makes this export the "root" export
- # not documented in the man page, but this means
- # 1. it can be mounted with a shorthand of server:/
- # 2. exports that are subdirectories of this one will automatically be mounted
- tu /etc/exports '/i/video 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)'
- s exportfs -rav
- showmount -e localhost
-fi
-
-
-# cron
-f=/a/bin/$HOSTNAME-crontab
-if [[ -e $f ]]; then
- $f
-fi
-
-e "$end_msg_var"
-
-
-# persistent virtual machines
-
-case $distro in
- debian|ubuntu)
- pi libosinfo-bin;
- ;;
+ pi nfs-utils
+ ;;
+ debian|trisquel|ubuntu)
+ pi-nostart nfs-server
+ ;;
+ arch)
+ pi nfs-utils || pending_reboot=true
+ ;;
esac
-# distro may not know about win 10 yet.
-variant=win7
-if ! virt-install --os-variant list &>/dev/null; then # we are using a newer virt-install
- for v in 10 8.1 8; do
- if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
- variant=win$v
- break
- fi
- done
-fi
+# networkmanager has this nasty behavior on flidas: if the machine
+# crashes with dnsmasq running, on subsequent boot, it adds an entry to
+# resolvconf for 127.0.0.1 in some stupid attempt to restore
+# nameservers.
+# This can be manually fixed by stoping dnsmasq,
+# then based on whats in /run/dnsmasq/, i see we can run
+# s resolvconf -d NetworkManager
+# oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
+ser stop NetworkManager
+ser disable NetworkManager
-if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
-
- # created account with
- # win10vmian@outlook.com, and easy to remember password
- # win 10 virtio, makes disk way way way faster
- # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
- # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
- # for installing virtio after initial install instead of with initial iso:
- # qemu-img create -f qcow2 fake.qcow2 1G
- # --disk=/a/images/virtio-win.iso,device=cdrom \
- # --disk=/a/images/fake.qcow2,bus=virtio
- # Also,
- # went to device manager, saw 2 pci devices with yellow !,
- # did search for drivers, pick cdrom location, done.
- #
- # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
- # google said there was a control panel option for it, but
- # that turned out to be a lie.
- # Put this in a .bat file and run as administrator to turn off
- # hyberboot which fucks things up.
- # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
- # power settings, turn off display: never
- # run "control userpasswords2", turn on automatic login.
- # note: when changing devices, I just undefine, the create the vm again.
-
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
-
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
+if [[ $HOSTNAME == frodo ]]; then
+ # nohide = export filesystems mounted deeper than the export point
+ # fsid=0 makes this export the "root" export
+ # not documented in the man page, but this means
+ # 1. it can be mounted with a shorthand of server:/
+ # 2. exports that are subdirectories of this one will automatically be mounted
+ tu /etc/exports <<'EOF'
+/k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
+EOF
+ s exportfs -rav
fi
-pi samba
-# note samba re-reads it's config every 1 minute
+e "$end_msg_var"
-# add 2 lines after workgroup option
-s sed -ri '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
-s sed -ri '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
-s sed -i 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
-# remove default homes section. not sharing that.
-s sed -ri '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
-[public]
- guest ok = yes
- read only = no
- path = /kfrodo
-EOF
-fi
+# if I was going to create a persistent vm, i might do it like this:
+# variant=something # from: virt-install --os-variant list
+# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ # -n some_name --import --os-variant $variant --cpu host-model-only
-case $distro in
- debian|ubuntu)
-# systemd claims it generates units from /etc/init.d, but it clearly doesn't
-# in debian. I have no idea how they are related. fuck debian right now. It's
-# not documented. samba has a systemd init file linked to /dev/null.
-# There's this https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
-# claims samba's sub-services will be started automatically by systemd... it
-# didn't on install, wonder if it will on boot. It clued me in how to start
-# it manually though. Nothing in /usr/share/doc/samba, debian admin guide
-# says nothing about any of this. (this is in debian testing as of 4/2016).
-
-s /etc/init.d/samba start
-;;
- arch)
- sgo samba
- ;;
-esac
-tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
+######### begin stuff belonging at the end ##########
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-s mount /mnt/root || [[ $? == 32 ]]
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- s mount /mnt/iroot || [[ $? == 32 ]]
+if $pending_reboot; then
+ echo "$0: pending reboot and then finished. doing it now."
+ s reboot now
+else
+ echo "$0: $(date): ending now)"
fi
-
-# Do this again because it occasionally has changes and
-# it can be run outside initial isntall.
-s /a/bin/fai/fai/config/distro-install-common/end
+exit 0