X-Git-Url: https://iankelling.org/git/?a=blobdiff_plain;ds=sidebyside;f=distro-end;h=64441d1cfc9d477847610a3158b8b72ac2f6a438;hb=1f524e72136f1d10548bdc4f502c6405ba6dbcd0;hp=8d1a580f3ac2cd3f03c1a1bed2691dcb5a6d8c65;hpb=d2a47c0cb8dd83d90b1062d0513d1719d5a15b9c;p=distro-setup
diff --git a/distro-end b/distro-end
index 8d1a580..64441d1 100755
--- a/distro-end
+++ b/distro-end
@@ -1,399 +1,1287 @@
#!/bin/bash -l
# Copyright (C) 2016 Ian Kelling
-# This program is under GPL v. 3 or later, see
-errcatch
-set -x
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
-exec &> >(sudo tee -a /var/log/distro-end)
-echo "$0: $(date): starting now)"
+# http://www.apache.org/licenses/LICENSE-2.0
+
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+### setup
+source /a/bin/errhandle/err
src="${BASH_SOURCE%/*}"
+source $src/pkgs
+set -x
+exec &> >(sudo tee -a /var/log/distro-end)
+echo "$0: $(date): starting now)"
+# see example of usage to understand.
end_msg() {
- = local y
- IFS= read -r -d '' y ||:
- end_msg_var+="$y"
+ local y
+ IFS= read -r -d '' y ||:
+ end_msg_var+="$y"
}
-
spa() { # simple package add
- simple_packages+=($@)
+ simple_packages+=($@)
}
-
distro=$(distro-name)
-
pending_reboot=false
-
+sed="sed --follow-symlinks"
# template
case $distro in
esac
+#### initial packages
pup
+if isdeb; then
+ pi aptitude
+fi
-simple_packages=(
- htop
- mailutils
- nmon
- ruby
- ruby-rest-client
- tree
- vim
-)
-
-case $HOSTNAME in
- lj|li) : ;;
- *)
- # universal packages
- # swh-plugins is for karaoke pulsaudio filter.
- simple_packages+=(
- apache2
- bwm-ng
- chromium
- duplicity
- evince
- fdupes
- filelight
- gdb
- gnome-screenshot
- jq
- locate
- meld
- offlineimap
- p7zip
- paprefs
- pavucontrol
- pdfgrep
- pianobar
- pidgin
- rdiff-backup
- slock
- squashfs-tools
- swh-plugins
- tcpdump
- transmission-remote-gtk
- vlc
- )
- ;;
-esac
-
-
-
-########### begin section including lj ################
+########### begin section including li ################
+pi ${p3[@]} $($src/distro-pkgs)
+conflink
case $distro in
- fedora) spa unrar ;;
- *) spa unrar-free ;;
+ arch) sgo cronie ;;
esac
-
case $distro in
- arch)
- # ubuntu 14.04 uses b-cron,
- # but its not maintained in arch.
- # of the ones in the main repos, cronie is only one maintained.
- # fcron appears abandoned software.
- pi cronie
- sgo cronie
- ;;
- *) : ;; # other distros come with cron.
+ arch) sgo atd ;;
esac
case $distro in
- debian|ubuntu)
- pi debian-goodies
- ;;
+ arch) sgo ntpd ;;
esac
+# no equivalent in other distros:
case $distro in
- *) pi at ;;&
- arch) sgo atd ;;
+ debian|trisquel|ubuntu)
+ if ! dpkg -s apt-file &>/dev/null; then
+ # this condition is just a speed optimization
+ pi apt-file
+ s apt-file update
+ fi
+ ;;
esac
-
+# disable motd junk.
case $distro in
- debian) pi curl;;
- arch) : ;;
- # fedora: unknown
+ debian)
+ # allows me to pipe with ssh -t, and gets rid of spam
+ # http://forums.debian.net/viewtopic.php?f=5&t=85822
+ # i'd rather disable the service than comment the init file
+ # this says disabling the service, it will still get restarted
+ # but this script doesn't do anything on restart, so it should be fine
+ s dd of=/var/run/motd.dynamic if=/dev/null
+ # stretch doesn't have initscripts pkg installed by default
+ if [[ $(debian-codename) == jessie ]]; then
+ s update-rc.d motd disable
+ fi
+ ;;
+ trisquel|ubuntu)
+ # this isn't a complete solution. It still shows me when updates are available,
+ # but it's no big deal.
+ s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
+ ;;
esac
-case $distro in
- # tk for gitk
- arch) spa git tk ;;
- *) spa git ;;
-esac
+# automatic updates
+# reference:
+# https://debian-handbook.info/browse/stable/sect.regular-upgrades.html
+# /etc/cron.daily/apt calls unattended-upgrades
+# /usr/share/doc/unattended-upgrades# cat README.md
+# /etc/apt/apt.conf.d/50unattended-upgrades
+if isdebian; then
+ setup-debian-auto-update
+fi
-case $distro in
- arch) spa the_silver_searcher ;;
- debian|ubuntu) spa silversearcher-ag ;;
- # fedora unknown
-esac
-case $distro in
- debian|ubuntu) spa ntp;;
- arch)
- pi ntp
- sgo ntpd
- ;;
- # others unknown
-esac
+### begin docker install ####
+if isdeb; then
+ # https://store.docker.com/editions/community/docker-ce-server-debian?tab=description
+ pi software-properties-common apt-transport-https
+ curl -fsSL https://download.docker.com/linux/$(distro-name-compat)/gpg | sudo apt-key add -
+ url=https://download.docker.com/linux/$(distro-name-compat)
+ l="deb [arch=amd64] $url $(debian-codename-compat) stable"
+
+ if ! grep -xFq "$l" /etc/apt/sources.list{,.d/*.list}; then
+ sudo add-apt-repository "$l"
+ p update
+ fi
+ # docker eats up a fair amount of cpu when doing nothing, so don't enable it unless
+ # we really need it.
+ pi-nostart docker-ce
+ # and docker is even more crap, it ignores that it shouldnt start
+ ser stop docker
+ ser disable docker
+ case $HOSTNAME in
+ li|lj) sgo docker ;;
+ esac
+ # other distros unknown
+fi
+### end docker install ####
-# no equivalent in other distros:
-case $distro in
- debian|ubuntu)
- pi apt-file aptitude
- s apt-file update
- # for debconf-get-selections
- spa debconf-utils
- ;;
-esac
+### begin certbot install ###
case $distro in
- ubuntu|debian) spa ack-grep ;;
- arch|fedora) spa ack ;;
- # fedora unknown
+ debian)
+ # note, need python-certbot-nginx for nginx, but it depends on nginx,
+ # and I'm not installing nginx by default right now.
+ # note python-certbot-apache is in suggests, but so is a doc package that brought in xorg
+ if [[ $(debian-codename) == jessie ]]; then
+ pi -t jessie-backports certbot python-certbot-apache
+ else
+ pi certbot python-certbot-apache
+ fi
+ ;;
+ trisquel|ubuntu)
+ # not packaged in xenial or flidas
+ pi software-properties-common
+ l="deb http://ppa.launchpad.net/certbot/certbot/ubuntu xenial main"
+ if ! grep -xFq "$l" /etc/apt/sources.list{,.d/*.list}; then
+ s add-apt-repository -y ppa:certbot/certbot ||:
+ p update
+ fi
+ pi python-certbot-apache
+ ;;
+ # todo: other distros unknown
esac
+# make a version of the certbot timer that emails me.
+x=/systemd/system/certbot
+$sed -r -f - /lib$x.timer <<'EOF' |s dd of=/etc${x}mail.timer
+s,^Description.*,\0 mail version,
+EOF
+$sed -r -f - /lib$x.service <<'EOF' |s dd of=/etc${x}mail.service
+s,(ExecStart=)(/usr/bin/certbot),\1/a/bin/log-quiet/sysd-mail-once certbotmail \2 --renew-hook /a/bin/distro-setup/certbot-renew-hook,
+EOF
+ser daemon-reload
+sgo certbotmail.timer
+### end certbot install ###
+
+
+# dogcam setup. not using atm
+# case $HOSTNAME in
+# lj|li)
+# /a/bin/webcam/install-server
+# ;;
+# kw)
+# /a/bin/webcam/install-client
+# ;;
+# esac
-case $distro in
- arch|debian|ubuntu)
- spa bash-completion
- ;;
- # others unknown
-esac
+pi ${p1[@]}
+
+
+## prometheus node exporter setup
+web-conf -f 9100 -p 9101 apache2 $(hostname -f) <<'EOF'
+#https://httpd.apache.org/docs/2.4/mod/mod_authn_core.html#authtype
+# https://stackoverflow.com/questions/5011102/apache-reverse-proxy-with-basic-authentication
+
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/prometheus-htpasswd"
+ Require valid-user
+
+EOF
+
+
+# website setup
+case $HOSTNAME in
+ lj|li)
+ case $HOSTNAME in
+ lj) domain=iank.bid; exit 0 ;;
+ li) domain=iankelling.org ;;
+ esac
+ /a/h/setup.sh $domain
+ /a/h/build.rb
+
+ sudo -E /a/bin/mediawiki-setup/mw-setup-script
+
+ pi-nostart mumble-server
+ s $sed -ri "s/^ *(serverpassword=).*/\1$(< /a/bin/bash_unpublished/mumble_pass)/" /etc/mumble-server.ini
+
+ # do certificate to avoid warning about unsigned cert,
+ # which is overkill for my use, but hey, I'm cool, I know
+ # how to do this.
+ web-conf apache2 mumble.iankelling.org
+ s rm -f /etc/apache2/sites-enabled/mumble.iankelling.org
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/mumble.iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
+EOF
+ sgo mumble-server
+ vpn-server-setup -rd
+ s tee /etc/openvpn/client-config/mail <<'EOF'
+ifconfig-push 10.8.0.4 255.255.255.0
+EOF
+ # it\'s strange. docker seems to make the default for forward
+ # be drop, but then I set it to accept and it\'s stuck that way,
+ # I dun know why. But, let\'s make sure we can forward anyways.
+ s DEBIAN_FRONTEND=noninteractive pi iptables-persistent
+ rm /etc/iptables/rules.v6
+ s tee /etc/iptables/rules.v4 <<'EOF'
+*filter
+-A FORWARD -i tun+ -o eth0 -j ACCEPT
+-A FORWARD -i eth0 -o tun+ -j ACCEPT
+COMMIT
+EOF
-# disable motd junk.
-case $(distro-name) in
- debian)
- # allows me to pipe with ssh -t, and gets rid of spam
- # http://forums.debian.net/viewtopic.php?f=5&t=85822
- # i'd rather disable the service than comment the init file
- # this says disabling the service, it will still get restarted
- # but this script doesn't do anything on restart, so it should be fine
- s dd of=/var/run/motd.dynamic if=/dev/null
- s update-rc.d motd disable
- ;;
- ubuntu)
- # this isn't a complete solution. It still shows me when updates are available,
- # but it's no big deal.
- s t /etc/update-motd.d/10-help-text /etc/update-motd.d/00-header
- ;;
-esac
+ sudo dd of=/etc/systemd/system/vpnmail.service <
+ Options +FollowSymLinks +Multiviews +Indexes
+ AllowOverride None
+ AuthType basic
+ AuthName "Authentication Required"
+ # setup one time, with root:www-data, 640
+ AuthUserFile "/etc/caldav-htpasswd"
+ Require valid-user
+
+EOF
+ # nginx version of above would be:
+ # auth_basic "Not currently available";
+ # auth_basic_user_file /etc/nginx/caldav/htpasswd;
+
+ ########## begin pump.io setup ##########
- { cat <<'EOF'
-Unattended-Upgrade::Mail "root";
-Unattended-Upgrade::MailOnlyOnError "true";
-Unattended-Upgrade::Remove-Unused-Dependencies "true";
-Unattended-Upgrade::Origins-Pattern {
-# default is just upgrade main and security, not updates.
+ # once pump adds a logrotation script, turn off nologger,
+ # and add
+ # "logfile": "/var/log/pumpio/pumpio.log",
+ #
+ s dd of=/etc/pump.io.json <<'EOF'
+{
+ "secret": "SECRET_REPLACE_ME",
+ "driver": "mongodb",
+ "params": { "dbname": "pumpio" },
+ "noweb": false,
+ "site": "pump.iankelling.org",
+ "owner": "Ian Kelling",
+ "ownerURL": "https://iankelling.org/",
+ "port": 8001,
+ "urlPort": 443,
+ "hostname": "pump.iankelling.org",
+ "nologger": true,
+ "datadir": "/home/pumpio/pumpdata",
+ "enableUploads": true,
+ "debugClient": false,
+ "disableRegistration": true,
+ "noCDN": true,
+ "key": "/home/pumpio/privkey.pem",
+ "cert": "/home/pumpio/fullchain.pem",
+ "address": "localhost",
+ "sockjs": false
+}
EOF
- if isdebian-testing; then
- cat <<'EOF'
-# for testing, only do security updates.
- "origin=Debian,codename=${distro_codename},label=Debian-Security";
+ s sed -i "s#SECRET_REPLACE_ME#$(cat /p/c/machine_specific/li/pump-secret)#" /etc/pump.io.json
+
+ # stretch node is too old
+ # https://nodejs.org/en/download/package-manager/
+ curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
+ pi nodejs graphicsmagick mongodb
+ cd /home/iank
+ if [[ -e pump.io ]]; then
+ cd pump.io
+ git pull
+ else
+ git clone https://github.com/pump-io/pump.io.git
+ cd pump.io
+ fi
+ # note: these 2 commands seem
+ # note: doing this or the npm install pump.io as root had problems.
+ npm install
+ npm run build
+ # normally, next command would be
+ # s npm install -g odb
+ # but it\'s this until a bug in pump gets fixed
+ # https://github.com/pump-io/pump.io/issues/1287
+ s npm install -g databank-mongodb@0.19.2
+ if ! getent passwd pumpio &>/dev/null; then
+ s useradd -Um -s /bin/false pumpio
+ fi
+ sudo -u pumpio mkdir -p /home/pumpio/pumpdata
+ # for testing browser when only listening to localhost,
+ # in the pump.io.json, set hostname localhost, urlPort 5233
+ #ssh -L 5233:localhost:5233 li
+
+ s mkdir -p /var/log/pumpio/
+ s chown pumpio:pumpio /var/log/pumpio/
+
+ web-conf - apache2 pump.iankelling.org <<'EOF'
+# currently a bug in pump that we cant terminate ssl
+ SSLProxyEngine On
+ ProxyPreserveHost On
+ ProxyPass / https://127.0.0.1:8001/
+ ProxyPassReverse / https://127.0.0.1:8001/
+ # i have sockjs disabled per people suggesting that
+ # it won\'t work with apache right now.
+ # not sure if it would work with this,
+ # but afaik, this is pointless atm.
+
+ ProxyPass wss://127.0.0.1:8001/main/realtime/sockjs/
+ ProxyPassReverse wss://127.0.0.1:8001/main/realtime/sockjs/
+
EOF
- else
- cat <<'EOF'
-# These are stable packages only getting bugfixes anyways.
- "origin=*";
+
+ sudo -i <<'EOF'
+export RENEWED_LINEAGE=/etc/letsencrypt/live/pump.iankelling.org
+/a/bin/distro-setup/certbot-renew-hook
EOF
+
+ s dd of=/etc/systemd/system/pump.service <<'EOF'
+[Unit]
+Description=pump.io
+After=syslog.target network.target mongodb.service
+Requires=mongodb.service
+
+[Service]
+Type=simple
+User=pumpio
+Group=pumpio
+ExecStart=/home/iank/pump.io/bin/pump
+Environment=NODE_ENV=production
+# failed to find databank-mongodb without this.
+# I just looked at my environment variables took a guess.
+Environment=NODE_PATH=/usr/lib/nodejs:/usr/lib/node_modules:/usr/share/javascript
+
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo pump
+ ########## end pump.io setup ############
+
+
+ ############# begin setup mastodon ##############
+
+ # main doc is Docker-Guide.md in docs repo
+
+ # I'd like to try gnu social just cuz of gnu, but it's not being
+ # well maintained, for example, simple pull requests
+ # languishing:
+ # https://git.gnu.io/gnu/gnu-social/merge_requests/143
+ # and I submitted my own bugs, basic docs are broken
+ # https://git.gnu.io/gnu/gnu-social/issues/269
+
+ # note, docker required, but we installed it earlier
+
+ # i subscrubed to https://github.com/docker/compose/releases.atom
+ # to see release notes.
+ # i had some problems upgrading. blew things away with
+ # docker-compose down
+ # docker rmi $(docker images -q)
+ # s reboot now
+ # when running docker-compose run, kernel stack traces are printed to the journal.
+ # things seem to succeed, google says nothing, so ignoring them.
+ curl -L https://github.com/docker/compose/releases/download/1.18.0/docker-compose-`uname -s`-`uname -m` | s dd of=/usr/local/bin/docker-compose
+ s chmod +x /usr/local/bin/docker-compose
+
+
+ cd ~
+ s rm -rf mastodon
+ i clone https://github.com/tootsuite/mastodon
+ cd mastodon
+ # subbed to atom feed to deal with updates
+ git checkout $(git tag | grep -v rc | tail -n1)
+
+ # per instructions, uncomment redis/postgres persistence in docker-compose.yml
+ sed -i 's/^#//' docker-compose.yml
+
+ cat >.env.production <<'EOF'
+REDIS_HOST=redis
+REDIS_PORT=6379
+DB_HOST=db
+DB_USER=postgres
+DB_NAME=postgres
+DB_PASS=
+DB_PORT=5432
+
+LOCAL_DOMAIN=mast.iankelling.org
+LOCAL_HTTPS=true
+
+SINGLE_USER_MODE=true
+
+SMTP_SERVER=mail.iankelling.org
+SMTP_PORT=25
+SMTP_LOGIN=li
+SMTP_FROM_ADDRESS=notifications@mast.iankelling.org
+SMTP_DOMAIN=mast.iankelling.org
+SMTP_DELIVERY_METHOD=smtp
+EOF
+
+ for key in PAPERCLIP_SECRET SECRET_KEY_BASE OTP_SECRET; do
+ # 1 minute 7 seconds to run this docker command
+ # to generate a secret, and it has ^M chars at the end. wtf. really dumb
+ printf "%s=%s\n" $key "$(docker-compose run --rm web rake secret|dos2unix|tail -n1)" >>.env.production
+ done
+ found=false
+ while read -r domain port pass; do
+ if [[ $domain == mail.iankelling.org ]]; then
+ found=true
+ # remove the username part
+ pass="${pass#*:}"
+ printf "SMTP_PASSWORD=%s\n" "$pass" >>.env.production
+ break
fi
- cat <<'EOF'
-};
+ done < <(s cat /etc/mailpass)
+ if ! $found; then
+ echo "$0: error, failed to find mailpass domain for mastadon"
+ exit 1
+ fi
+
+ # docker compose makes an interface named like br-8f3e208558f2. we need mail to
+ # get routed to us.
+ if ! s /sbin/iptables -t nat -C PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25; then
+ s /sbin/iptables -t nat -A PREROUTING -i br-+ -p tcp -m tcp --dport 25 -j DNAT --to-destination 10.8.0.4:25
+ fi
+
+ docker-compose run --rm web rake mastodon:webpush:generate_vapid_key | grep -E '^VAPID_PUBLIC_KEY=|^VAPID_PRIVATE_KEY=' >> .env.production
+ logq docker-compose run --rm web rake db:migrate
+ docker-compose run --rm web rails assets:precompile
+
+ # avatar failed to upload, did
+ # docker logs mastodon_web_1
+ # google lead me to this
+ s chown -R 991:991 public/system
+
+ # docker daemon takes care of starting on boot.
+ docker-compose up -d
+
+ s a2enmod proxy_wstunnel headers
+ web-conf -f 3000 - apache2 mast.iankelling.org <<'EOF'
+ ProxyPreserveHost On
+ RequestHeader set X-Forwarded-Proto "https"
+ ProxyPass /500.html !
+ ProxyPass /oops.png !
+ ProxyPass /api/v1/streaming/ ws://localhost:4000/
+ ProxyPassReverse /api/v1/streaming/ ws://localhost:4000/
+ ErrorDocument 500 /500.html
+ ErrorDocument 501 /500.html
+ ErrorDocument 502 /500.html
+ ErrorDocument 503 /500.html
+ ErrorDocument 504 /500.html
EOF
- } | s dd of=/etc/apt/apt.conf.d/50unattended-upgrades
- echo $- > /tmp/x
-fi
+ ############### !!!!!!!!!!!!!!!!!
+ ############### manual steps:
+
+ # only following a few people atm, so not bothering to figure out backups
+ # when mastodon has not documented it at all.
+ #
+ # fsf@status.fsf.org
+ # cwebber@toot.cat
+ # dbd@status.fsf.org
+ # johns@status.fsf.org
+
+ # sign in page is at https://mast.iankelling.org/auth/sign_in
+ # register as iank, then
+ # https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Administration-guide.md
+ # docker-compose run --rm web bundle exec rails mastodon:make_admin USERNAME=iank
+
+ ############# end setup mastodon ##############
+
+ # we use nsupdate to update the ip of home
+ pi bind9
+
+ pi znc
+ # znc config generated by doing
+ # znc --makeconf
+ # selected port is also used in erc config
+ # comma separated channel list worked.
+ # while figuring things out, running znc -D for debug in foreground.
+ # to exit and save config:
+ # /msg *status shutdown
+ # configed auth on freenode by following
+ # https://wiki.znc.in/Sasl:
+ # /msg *sasl RequireAuth yes
+ # /msg *sasl Mechanism PLAIN
+ # /msg *sasl Set ident_name password
+ # created the system service after, and had to do
+ # mv /home/iank/.znc/* /var/lib/znc
+ # sed -i 's,/home/iank/.znc/,/var/lib/znc,' /var/lib/znc/config/znc.conf
+ # and made a copy of the config files into /p/c
+ # /msg *status LoadMod --type=global log -sanitize
+ # to get into the web interface,
+ # cat /etc/letsencrypt/live/iankelling.org/{privkey,cert,chain}.pem > /var/lib/znc/znc.pem
+ # then use non-main browser or else it doesn't allow it based on ocsp stapling from my main site.
+ # https://iankelling.org:12533/
+ # i'm going to figure out how to automate this when it expires. i know i can hook a script into the renewal. https://wiki.znc.in/FAQ seems to imply that znc doesn\'t need restart.
+ # todo: in config file AllowWeb = true should be false. better security if that is off unless we need it.
+ # /msg *status LoadMod --type=network perform
+ # /msg *perform add PRIVMSG ChanServ :invite #fsf-office
+ # /msg *perform add JOIN #fsf-office
+ #
+ # i set Buffer = 500
+ # also ran /znc LoadMod clearbufferonmsg
+ # it would be nice if erc supported erc query buffers by doing
+ # /msg *status clearbuffer /dev/null <<'EOF'
+[Unit]
+Description=ZNC, an advanced IRC bouncer
+After=network-online.target
-# cron
-/a/bin/crons/all
+[Service]
+ExecStart=/usr/bin/znc -f --datadir=/var/lib/znc
+User=znc
+[Install]
+WantedBy=multi-user.target
+EOF
+ ser daemon-reload
+ sgo znc
-case $HOSTNAME in
- lj|li)
+ echo "$0: $(date): ending now)"
+ exit 0
+ ;;
+esac
- pi "${simple_packages[@]}"
- case $HOSTNAME in
- lj) domain=iank.bid ;;
- li) domain=iankelling.org ;;
- esac
- homepage-setup $domain
- s rld /a/h/_site/ /var/www/$domain/html
+########### end section including li/lj ###############
+
+# depends gcc is a way to install suggests. this is apparently the only
+# way to install suggests even if the main package is already
+# installed. reinstall doesn't work, uninstalling can cause removing
+# dependent packages.
+pi ${pall[@]} $(apt-cache search ruby[.0-9]+-doc| awk '{print $1}') $(apt-cache depends gcc|grep -i suggests:| awk '{print $2}')
+
+if ! type pip; then
+ x=$(mktemp)
+ wget -O$x https://bootstrap.pypa.io/get-pip.py
+ python3 $x --user
+fi
- curl https://$domain/git/?p=mediawiki-setup/.git;a=blob_plain;f=mw-setup-script;hb=HEAD | bash
- $src/phab-setup
+sgo fsf-vpn-dns-cleanup
- echo "$0: $(date): ending now)"
- exit 0
- ;;
+case $distro in
+ debian)
+ pi chromium ;;
+ trisquel|ubuntu)
+ wget -qO - https://downloads.iridiumbrowser.de/ubuntu/iridium-release-sign-01.pub|sudo apt-key add -
+ t=$(mktemp)
+ cat >$t </dev/null <$t < /dev/null; then
+ s groupadd -g 450 debian-transmission
+ case $distro in
+ arch)
+ s useradd \
+ --system \
+ --create-home \
+ --gid 450 \
+ --uid 450 \
+ --home-dir /var/lib/transmission-daemon \
+ --shell /bin/false \
+ debian-transmission
+ ;;
+ *)
+ s adduser --quiet \
+ --gid 450 \
+ --uid 450 \
+ --system \
+ --no-create-home \
+ --disabled-password \
+ --home /var/lib/transmission-daemon \
+ debian-transmission
+ ;;
+ esac
+fi
+# We want group writable stuff from transmission.
+# However, after setting this, I learn that transmission sets it's
+# own umask based on it's settings file. Well, no harm leaving this
+# so it's set right from the beginning.
+s chfn debian-transmission -o umask=0002
-if [[ $HOSTNAME == frodo ]]; then
- case $distro in
- debian|ubuntu)
- # note i had to do this, which is persistent:
- # cd /i/k
- # s chgrp debian-transmission torrents partial-torrents
-
- # syslog says things like
- # 'Failed to set receive buffer: requested 4194304, got 425984'
- # google suggets giving it even more than that
- tu /etc/sysctl.conf<<'EOF'
+case $distro in
+ debian|trisquel|ubuntu)
+ # note i had to do this, which is persistent:
+ # cd /i/k
+ # s chgrp debian-transmission torrents partial-torrents
+
+ # syslog says things like
+ # 'Failed to set receive buffer: requested 4194304, got 425984'
+ # google suggets giving it even more than that
+ tu /etc/sysctl.conf<<'EOF'
net.core.rmem_max = 67108864
net.core.wmem_max = 16777216
EOF
- s sysctl -p
-
- # some reason it doesn't seem to start automatically anyways
- pi-nostart transmission-daemon
- # config file documented here, and it's the same config
- # for daemon vs client, so it's documented in the gui.
- # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
- s ruby <<'EOF'
+ s sysctl -p
+
+ # some reason it doesn\'t seem to start automatically anyways
+ pi-nostart transmission-daemon
+ # be extra sure its not started
+ ser disable transmission-daemon
+ ser stop transmission-daemon
+
+ # the folder was moved here after an install around 02/2017.
+ # it contains runtime data,
+ # plus a simple symlink to the config file which it\'s
+ # not worth separating out.
+ # between comps, the uid can change
+ f=/i/transmission-daemon
+ s lnf -T $f /var/lib/transmission-daemon/.config/transmission-daemon
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:debian-transmission $f
+ fi
+ for f in /i/k/partial-torrents /i/k/torrents; do
+ if [[ -e $f ]]; then
+ s chown -R debian-transmission:traci $f
+ fi
+ done
+ s chown -R debian-transmission:debian-transmission /var/lib/transmission-daemon
+ #
+ # config file documented here, and it\'s the same config
+ # for daemon vs client, so it\'s documented in the gui.
+ # https://trac.transmissionbt.com/wiki/EditConfigFiles#Options
+ #
+ # I originaly setup rpc-whitelist, but after using
+ # routing to a network namespace, it doesn\'t see the
+ # real source address, so it\'s disabled.
+ #
+ # Changed the cache-size to 256 mb, reduces disk use.
+ # It is a read & write cache.
+ #
+ s ruby <<'EOF'
require 'json'
p = '/etc/transmission-daemon/settings.json'
File.write(p, JSON.pretty_generate(JSON.parse(File.read(p)).merge({
-'rpc-whitelist' => '127.0.0.1,192.168.1.*',
+'rpc-whitelist-enabled' => false,
'rpc-authentication-required' => false,
'incomplete-dir' => '/i/k/partial-torrents',
+'incomplete-dir-enabled' => true,
'download-dir' => '/i/k/torrents',
-"speed-limit-up" => 700,
+"speed-limit-up" => 800,
"speed-limit-up-enabled" => true,
-"ratio-limit" => 1.4000,
+"peer-port" => 61486,
+"cache-size-mb" => 256,
+"ratio-limit" => 5.0,
"ratio-limit-enabled" => true,
})) + "\n")
EOF
- sgo transmission-daemon
- ;;
- arch)
- # todo, setup it's config file & daemon
- pi transmission-cli
- ;;
- esac
+
+ ;;
+ # todo: others unknown
+esac
+
+
+
+# trisquel 8 = openvpn, debian stretch = openvpn-client
+vpn_ser=openvpn-client
+if [[ ! -e /lib/systemd/system/openvpn-client@.service ]]; then
+ vpn_ser=openvpn
fi
-# adapted from /var/lib/dpkg/info/transmission-daemon.postinst
-if ! getent passwd debian-transmission > /dev/null; then
- case $distro in
- arch)
- s useradd \
- --system \
- --create-home \
- --home-dir /var/lib/transmission-daemon \
- --shell /bin/false \
- debian-transmission
- ;;
- *)
- s adduser --quiet \
- --system \
- --group \
- --no-create-home \
- --disabled-password \
- --home /var/lib/transmission-daemon \
- debian-transmission
- ;;
- esac
+s dd of=/etc/systemd/system/transmission-daemon-nn.service </dev/null; then
- s apt-get -fy install
- else
- exit 1
- fi
- ;;
- esac
- ;;
- arch)
- pi google-chrome
- ;;
- esac
- ;;
-esac
-
-# printer
-case $distro in
- arch)
- pi cups ghostscript gsfonts # from arch wiki cups page
- pi hplip # from google
- s gpasswd -a $USER sys # from arch wiki
- sgo org.cups.cupsd.service
- # goto http://127.0.0.1:631
- # administration tab, add new printer button.
- # In debian, I could use hte recommended driver,
- # in arch, I had to pick out the 6L driver.
- ;;
- debian|ubuntu)
- spa hplip
- ;;
- # other distros unknown
-esac
-
-
-case $distro in
- ubuntu|debian) pi --no-install-recommends mairix notmuch ;;
- fedora|arch) spa mairix notmuch ;;
-esac
-case $distro in
- arch) spa nfs-utils ;;
- ubuntu|debian) spa nfs-client ;;
-esac
-case $distro in
- ubuntu|debian) spa par2 ;;
- arch|fedora) spa par2cmdline ;;
-esac
-
-# needed for my tex resume
-case $distro in
- ubuntu|debian) spa texlive-full ;;
- arch) spa texlive-most ;;
- # fedora unknown
-esac
-
-case $distro in
- ubuntu)
- # flash, unrar, codecs, ms fonts.
- # This has a manual prompt.
- spa ubuntu-restricted-extras
- ;;
- fedora)
- pi yum-utils
- # rpm fusion recommended codecs
- s su -c "yum localinstall -y --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
- pi gstreamer-plugins-ugly gstreamer-plugins-bad gstreamer-ffmpeg\
- xine-lib-extras-freeworld
- ;;
-esac
-
-case $distro in
- # optional dep for firefox for h.264 video
- arch) spa gst-libav ;;
- # other distros, probably come by default
-esac
-
-case $distro in
- fedora|ubuntu|debian) spa gnupg-agent ;;
- arch) : ;;
+ li|lj) s rm -rf /home/linode ;;
esac
+### printer setup
case $distro in
- fedora) spa pinentry-gtk ;;
- *) : ;; # comes default or with other packages
-esac
-
-case $distro in
- arch) spa firefox pulseaudio;;
- *) : ;; # comes default or with other packages
+ arch)
+ pi cups ghostscript gsfonts # from arch wiki cups page
+ pi hplip # from google
+ s gpasswd -a $USER sys # from arch wiki
+ sgo org.cups.cupsd.service
+ ;;
+ debian|trisquel|ubuntu)
+ pi cups
+ s gpasswd -a $USER lpadmin # based on ubuntu wiki
+ spa hplip
+ ;;
+ # other distros unknown
esac
+# goto http://127.0.0.1:631
+# administration tab, add new printer button.
+# In debian, I could use hte recommended driver,
+# in arch, I had to pick out the 6L driver.
-case $distro in
- arch) spa ttf-dejavu;;
- debian|ubuntu) spa fonts-dejavu ;;
- # others unknown
-esac
-
-
-case $distro in
- arch) spa xorg-xev;;
- debian|ubuntu) spa x11-utils ;;
- # others unknown
-esac
-
-case $distro in
- arch) pi virt-install;;&
- debian|ubuntu) pi virtinst ;;&
- *) pi virt-manager ;; # creates the libvirt group in debian at least
- # others unknown
-esac
# allow user to run vms, from debian handbook
-for x in ian traci; do s usermod -a -G libvirt,kvm $x; done
-# bridge networking as user fails. google lead here, but it doesn't work:
+for x in iank traci; do s usermod -a -G libvirt,kvm $x; done
+# bridge networking as user fails. google lead here, but it doesn\'t work:
# oh well, I give up.
# http://wiki.qemu.org/Features-Done/HelperNetworking
# s mkdir /etc/qemu
@@ -567,126 +1346,68 @@ for x in ian traci; do s usermod -a -G libvirt,kvm $x; done
# #s chown root:qemu $f # debian has somethig like qemu-libvirt. equivalent?
# s chmod 640 $f
-
-case $distro in
- arch) spa cdrkit;;
- debian|ubuntu) spa genisoimage;;
- # others unknown
-esac
-
-case $distro in
- arch) spa spice-gtk3 ;;
- debian|ubuntu) spa spice-client-gtk;;
- # others unknown
-esac
-
# general known for debian/ubuntu, not for fedora
-case $distro in
- arch)
- # cdrkit for cloud-init isos
- # dnsmasq & ebtables for nat networking in libvirt
- # qemu for qemu-img, bind-tools for dig
- # dmidecode just because syslog complains
- pi unzip xorg-xmodmap dmidecode ebtables\
- bridge-utils dnsmasq qemu bind-tools
- # otherwise we get error about accessing kvm module.
- # seems like there might be a better way, but google was a bit vague.
- s sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
- echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
- # https://bbs.archlinux.org/viewtopic.php?id=206206
- # # this should prolly go in the wiki
- sgo virtlogd.socket
- # guessing this is not needed
- #sgo virtlogd.service
- sgo libvirtd
-
- ;;
-esac
-
-case $distro in
- arch) pi virtviewer ;;
- *) : ;; # other distros have it as a dependency afaik.
-esac
-
-
-
-case $distro in
- fedora) cabal install shellcheck ;;
- *) spa shellcheck ;;
- # unknown for older ubuntu
-esac
-
-
-case $distro in
- arch|debian|ubuntu) spa pumpa ;;
- # others unknown. do have a buildscript:
- # /a/bin/buildscripts/pumpa ;;
-esac
-
case $distro in
- debian|ubuntu) spa android-tools-adb/unstable ;;
- arch) spa android-tools ;;
- # other distros unknown
+ debian|trisquel|ubuntu)
+ if ! type -p go &>/dev/null; then
+ cd $(mktemp -d)
+ # just the latest stable at the time of writing
+ # TODO, maybe put this all into a build script,
+ # and do some automatic updates
+ wget -q https://dl.google.com/go/go1.12.4.linux-amd64.tar.gz
+ s tar -C /usr/local -xzf go1.12.4.linux-amd64.tar.gz
+ rm -f *
+ fi
+ go get -u mvdan.cc/fdroidcl
+ # a bit of googling, and added settings to bashrc
+ ;;
esac
case $distro in
- debian)
- if [[ `debian-archive` == testing ]]; then
- # has no unstable dependencies
- spa bitcoin-qt/unstable
- fi
- ;;
- # other distros unknown
-esac
-
-
-# proprietary flash. going without for now
-# case $distro in
-# debian)
-# pi flashplugin-nonfree
-# esac
-
-
+ arch)
+ pi virt-install
+ # otherwise we get error about accessing kvm module.
+ # seems like there might be a better way, but google was a bit vague.
+ s $sed -ri '/^ *user *=/d' /etc/libvirt/qemu.conf
+ echo 'user = "root"' | s tee -a /etc/libvirt/qemu.conf
+ # guessing this is not needed
+ #sgo virtlogd.service
+
+ # iank: disabed as im not using libvirt usually
+ # # https://bbs.archlinux.org/viewtopic.php?id=206206
+ # # # this should prolly go in the wiki
+ # sgo virtlogd.socket
+ # sgo libvirtd
+ ;;
+ debian|trisquel|ubuntu)
+ pi-nostart virtinst virt-manager
+ ;;
-case $distro in
- fedora)
- cd $(mktemp -d)
- wget http://tamacom.com/global/global-6.3.2.tar.gz
- ex global*
- cd global-6.3.2
- # based on https://github.com/leoliu/ggtags
- ./configure --with-exuberant-ctags=/usr/bin/ctags
- make
- s make install
- s pip install pygments
- ;;
- *)
- pi global
- ;;&
- arch)
- pi python2-pygments
- ;;
- debian|ubuntu)
- pi python-pygments
- ;;
esac
case $distro in
- debian)
- pi task-cinnamon-desktop
- # in settings, change scrolling to two-finger,
- # because the default edge scroll doesn\'t work.
- pu transmission-gtk
- ;;
- # others unknown
-esac
-
-case $distro in
- arch) spa apg ;;
-
- # already in debian jessie
+ fedora)
+ cd $(mktemp -d)
+ wget ftp://ftp.gnu.org/pub/gnu/global/global-6.5.7.tar.gz
+ ex global*
+ cd global-6.5.7
+ # based on https://github.com/leoliu/ggtags
+ ./configure --with-exuberant-ctags=/usr/bin/ctags
+ make
+ s make install
+ pip install pygments
+ ;;
+ *)
+ pi global
+ ;;&
+ arch)
+ pi python2-pygments
+ ;;
+ debian|trisquel|ubuntu)
+ pi python-pygments
+ ;;
esac
@@ -696,73 +1417,122 @@ esac
# because no systemd user instance was running.
# Doing systemd --user resulted in
# Trying to run as user instance, but $XDG_RUNTIME_DIR is not set
-case $distro in
- # ubuntu unknown. probably the same as debian, just check if the
- # init scripts come with the package.
- debian)
- # copied from arch, but moved to etc
- s dd of=/etc/systemd/user/synergys.service <<'EOF'
-[Unit]
-Description=Synergy Server Daemon
-After=network.target
-[Service]
-User=%i
-ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
-Restart=on-failure
+if isdebian-testing; then
+ # as of 7/2016, has no unstable deps, and is not in testing anymore.
+ pi synergy/unstable
+else
+ pi synergy
+fi
-[Install]
-WantedBy=multi-user.target
-EOF
- s dd of=/etc/systemd/user/synergys.socket <<'EOF'
-[Unit]
-Conflicts=synergys@.service
+# case $distro in
+# # ubuntu unknown. probably the same as debian, just check if the
+# # init scripts come with the package.
+# debian)
+# # copied from arch, but moved to etc
+# s dd of=/etc/systemd/user/synergys.service <<'EOF'
+# [Unit]
+# Description=Synergy Server Daemon
+# After=network.target
+
+# [Service]
+# User=%i
+# ExecStart=/usr/bin/synergys --no-daemon --config /etc/synergy.conf
+# Restart=on-failure
+
+# [Install]
+# WantedBy=multi-user.target
+# EOF
+# s dd of=/etc/systemd/user/synergys.socket <<'EOF'
+# [Unit]
+# Conflicts=synergys@.service
-[Socket]
-ListenStream=24800
-Accept=false
+# [Socket]
+# ListenStream=24800
+# Accept=false
-[Install]
-WantedBy=sockets.target
-EOF
- ;;&
- *)
- pi synergy
- # taken from arch wiki.
- s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
-[Unit]
-Description=Synergy Client
-After=network.target
+# [Install]
+# WantedBy=sockets.target
+# EOF
+# # had this fail with 'Failed to connect to bus: No such file or directory'
+# # then when I tried it manually, it worked fine...
+# if ! systemctl --user daemon-reload; then
+# sleep 2
+# echo retrying systemd user daemon reload
+# systemctl --user daemon-reload
+# fi
+# ;;&
+# *)
+# # taken from arch wiki.
+# s dd of=/etc/systemd/system/synergyc@.service <<'EOF'
+# [Unit]
+# Description=Synergy Client
+# After=network.target
+
+# [Service]
+# User=%i
+# ExecStart=/usr/bin/synergyc --no-daemon frodo
+# Restart=on-failure
+# # per man systemd.unit, StartLimitInterval, by default we
+# # restart more than 5 times in 10 seconds.
+# # And this param defaults too 200 miliseconds.
+# RestartSec=3s
+
+# [Install]
+# WantedBy=multi-user.target
+# EOF
+# s systemctl daemon-reload
+# case $HOSTNAME in
+# x2|x3|tp)
+# ser enable synergyc@iank
+# ser start synergyc@iank ||: # X might not be running yet
+# ;;
+# frodo)
+# systemctl --user start synergys ||:
+# systemctl --user enable synergys
+# ;;
+# esac
+# ;;
+# esac
-[Service]
-User=%i
-ExecStart=/usr/bin/synergyc --no-daemon treetowl
-Restart=on-failure
-# per man systemd.unit, StartLimitInterval, by default we
-# restart more than 5 times in 10 seconds.
-# And this param defaults too 200 miliseconds.
-RestartSec=3s
-[Install]
-WantedBy=multi-user.target
-EOF
- case $HOSTNAME in
- frodo)
- ser enable synergyc@ian
- ser start synergyc@ian ||: # X might not be running yet
- systemctl --user start synergys ||:
- systemctl --user enable synergys
- ;;
- treetowl) systemctl --user enable synergys ;;
- esac
- ;;
+pi --no-install-recommends kdeconnect-plasma
+### kdeconnect for gnome. started in /a/bin/distro-setup/desktop-20-autostart.sh
+### but gnome + xmonad not working in flidas, so i disabled it
+pi libgtk-3-dev python3-requests-oauthlib valac cmake python-nautilus libappindicator3-dev
+cd /a/opt/indicator-kdeconnect
+mkdir -p build
+cd build
+cmake .. -DCMAKE_INSTALL_PREFIX=/usr
+make
+sudo make install
+# we can start it manually with /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
+# it seems, according to
+# /etc/xdg/autostart/kdeconnectd.desktop
+# I'm not seeing the icon, but the clipboard replication is working
+
+
+### model 01 arduino support ###
+# https://github.com/keyboardio/Kaleidoscope/wiki/Install-Arduino-support-on-Linux
+# also built latest arduino in /a/opt/Arduino, (just cd build; ant build; ant run )
+# set arduino var in bashrc,
+# have system config file setup too.
+sudo adduser $USER dialout
+case $distro in
+ arch)
+ sudo usermod -a -G uucp $USER
+ ;;
esac
+# this is for the mail command too. update-alternatives is kind of misleading
+# since at least it's main commands pretend mail does not exist.
+# bsd's mail got pulled in on some dumb dependency, i dunno how.
+s update-alternatives --set mailx /usr/bin/mail.mailutils
######### end misc packages #########
-# packages I once used before and liked, but don't want installed now for
+# packages I once used before and liked, but don\'t want installed now for
# various reasons:
# python-sqlite is used for offlineimap
# lxappearance python-sqlite dolphin paman dconf-editor
@@ -782,8 +1552,8 @@ pi smartmontools
# -o on, turn on 4 hour period non-performance degrading testing.
# short test daily 2-3am, extended tests Saturdays between 3-4am:
sched="-s (S/../.././02|L/../../6/03)"
-s sed -i "s#^[[:space:]]*DEVICESCAN.*#\
-DEVICESCAN -a -o on -S on -n standby,q $sched\
+s sed -i --follow-symlinks "s#^[[:space:]]*DEVICESCAN.*#\
+DEVICESCAN -a -o on -S on -n standby,q $sched \
-m ian@iankelling.org -M exec /usr/local/bin/smart-notify#" /etc/smartd.conf
# in the default configuration of at least ubuntu 14.04, resolvconf is
@@ -792,7 +1562,7 @@ DEVICESCAN -a -o on -S on -n standby,q $sched\
# consulted first. This is often slower and undesirable, ie. local dns
# queries go from 0ms to 10+ or 100+ ms. To reverse the ordering, you
# can do:
-#sudo sed -i '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
+#sudo sed -i --follow-symlinks '/tun\*\|tap\*/d' /etc/resolvconf/interface-order
# however, this breaks dns lookup for hosts on the openvpn lan.
# I can\'t figure out why hosts on the normal lan would not be
# broken under the default ordering, except the host I was
@@ -802,73 +1572,137 @@ DEVICESCAN -a -o on -S on -n standby,q $sched\
########### misc stuff
+# make networkmanager use resolvconf instead of its own dnsmasq which
+# conflicts with the normal dnsmasq package.
+f=/etc/NetworkManager/NetworkManager.conf
+m=$(md5sum $f)
+s sed -ri '/ *\[main\]/,/^ *\[[^]]+\]/{/^\s*dns[[:space:]=]/d}' $f
+if [[ $m != $(md5sum $f) ]]; then
+ srestart NetworkManager
+fi
-case $distro in
- debian|ubuntu)
- case `debian-archive` in
- stable)
- s dd of=/etc/apt/preferences.d/unison-gtk <<'EOF'
-Explanation: Allow unison-gtk to be upgraded
-Package: unison-gtk
-Pin: release a=unstable
-Pin-Priority: 500
+# make my /etc/fonts/conf.d/ get used.
+# I have a new sans-serif font there because the default one
+# displays l and I as the same char, grrrrr.
+s fc-cache
+
+/a/bin/distro-setup/mymimes
+
+
+sgo dynamicipupdate
+
+
+# stop autopoping windows when i plug in an android phone.
+# dbus-launch makes this work within an ssh connection, otherwise you get this message,
+# with still 0 exit code.
+# dconf-WARNING **: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY
+dbus-launch gsettings set org.gnome.desktop.media-handling automount-open false
+
+
+# on grub upgrade, we get prompts unless we do this
+devs=()
+for dev in $(s btrfs fi show /boot | sed -nr 's#.*path\s+(\S+)$#\1#p'); do
+ devs+=($(devbyid $dev),)
+done
+devs[-1]=${devs[-1]%,} # jonied by commas
+s debconf-set-selections < x.html
+EOF
+
+
+case $distro in
+ trisquel|ubuntu|debian)
+ # unison-gtk second, i want it to be default, not sure if that works
+ # with spa. note, I used to install from testing repo when using stable,
+ # but it shouldn't be needed since I wrote a script to handle mismatching
+ # compilers.
+ spa unison unison-gtk
+ ;;
+ arch)
+ spa unison gtk2
+ ;;
esac
case $distro in
- arch)
- # default is alsa, doesn\'t work with with pianobar
- s dd of=/etc/libao.conf <<'EOF'
+ arch)
+ # default is alsa, doesn\'t work with with pianobar
+ s dd of=/etc/libao.conf <<'EOF'
default_driver=pulse
EOF
- ;;
+ ;;
esac
-# not using it atm, and for jessie, it depends on a higher version of btrfs-tools
+# note, for jessie, it depends on a higher version of btrfs-tools.
+#
+# # disabled due to my patch being in btrbk
# case $distro in
-# arch|debian|ubuntu) pi btrbk ;;
+# arch|debian|trisquel|ubuntu) pi btrbk ;;
# # others unknown
# esac
+cd /a/opt/btrbk
+s make install
-if [[ $HOSTNAME == treetowl ]] && [[ `debian-archive` != testing ]]; then
- # fail2 ban is broken, with a workaround, per
- # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770171
- # ill wait a while to see if it gets fixed
- pi fail2ban
- sgo fail2ban
-fi
-
-
+# ian: temporarily disabled while hosts are in flux.
+# if [[ $HOSTNAME == tp ]]; then
+# # backup/sync manually on others hosts for now.
+# sgo btrbk.timer
+# # note: to see when it was last run,
+# # ser list-timers
+# fi
+end_msg <<'EOF'
+In mate settings settings, change scrolling to two-finger,
+because the default edge scroll doesn\'t work. Originally found this in debian.
+EOF
case $distro in
- debian|ubuntu) s gpasswd -a ian adm ;; #needed for reading logs
+ debian)
+ # remove dep that came in with desktop
+ pu transmission-gtk
+ ;;
esac
-# tor
+
case $distro in
- # based on
- # https://www.torproject.org/docs/rpms.html.en
- # https://www.torproject.org/docs/debian.html.en
- # todo: figure out if the running service needs to be restarted upon updates
+ debian|trisquel|ubuntu) s gpasswd -a iank adm ;; #needed for reading logs
+esac
+/a/bin/buildscripts/pithosfly
- # todo on fedora: setup non-dev packages
- fedora)
- s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
+#### tor
+case $distro in
+ # based on
+ # https://www.torproject.org/docs/rpms.html.en
+ # https://www.torproject.org/docs/debian.html.en
+ # todo: figure out if the running service needs to be restarted upon updates
+ # todo on fedora: setup non-dev packages
+ fedora)
+ s dd of=/etc/yum.repos.d/torproject.repo <<'EOF'
[tor]
name=Tor experimental repo
enabled=1
@@ -885,35 +1719,35 @@ gpgcheck=1
gpgkey=http://deb.torproject.org/torproject.org/rpm/RPM-GPG-KEY-torproject.org.asc
EOF
- # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
- # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
- sgo tor
- /a/bin/buildscripts/tor-browser
- ;;
- ubuntu)
- tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
- gpg --keyserver keys.gnupg.net --recv 886DDD89
- gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
- p update
- pi deb.torproject.org-keyring
- pi tor
- /a/bin/buildscripts/tor-browser
- ;;
- debian)
- pi tor
- /a/bin/buildscripts/tor-browser
- ;;
- arch)
- pi tor tor-browser-en
- sgo tor
- ;;
- # ubuntu unknown
+ # to be secure, take a look at the fingerprint reported from the following install, and see if it matches from the link above:
+ # 3B9E EEB9 7B1E 827B CF0A 0D96 8AF5 653C 5AC0 01F1
+ sgo tor
+ /a/bin/buildscripts/tor-browser
+ ;;
+ ubuntu)
+ tu /etc/apt/sources.list "deb http://deb.torproject.org/torproject.org $(debian-codename) main"
+ gpg --keyserver keys.gnupg.net --recv 886DDD89
+ gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | sudo apt-key add -
+ p update
+ pi deb.torproject.org-keyring
+ pi tor
+ /a/bin/buildscripts/tor-browser
+ ;;
+ debian)
+ pi tor
+ /a/bin/buildscripts/tor-browser
+ ;;
+ arch)
+ pi tor tor-browser-en
+ sgo tor
+ ;;
+ # ubuntu unknown
esac
# nfs server
case $distro in
- fedora)
- end_msg <<'EOF'
+ fedora)
+ end_msg <<'EOF'
fedora todo: disable the firewall or find a way to automate it.
there's an unused section in t.org for tramikssion firewall setup
@@ -930,183 +1764,64 @@ make sure to reload the firewall to load the persistent configuration
EOF
- pi nfs-utils
- sgo nfs-server
- ;;
- debian|ubuntu)
- pi nfs-server
- ;;
- arch)
- pi nfs-utils || pending_reboot=true
- sgo rpcbind
- # this failed until I rebooted
- sgo nfs-server
- ;;
+ pi nfs-utils
+ sgo nfs-server
+ ;;
+ debian|trisquel|ubuntu)
+ pi nfs-server
+ ;;
+ arch)
+ pi nfs-utils || pending_reboot=true
+ sgo rpcbind
+ # this failed until I rebooted
+ sgo nfs-server
+ ;;
esac
+# networkmanager has this nasty behavior on flidas: if the machine
+# crashes with dnsmasq running, on subsequent boot, it adds an entry to
+# resolvconf for 127.0.0.1 in some stupid attempt to restore
+# nameservers.
+# This can be manually fixed by stoping dnsmasq,
+# then based on whats in /run/dnsmasq/, i see we can run
+# s resolvconf -d NetworkManager
+# oh ya, and stoping NetworkManager leaves this crap behind without cleaning it up.
+ser stop NetworkManager
+ser disable NetworkManager
+
+
if [[ $HOSTNAME == frodo ]]; then
- tu /etc/exports <<'EOF'
-/k 192.168.1.0/24(rw,nohide,no_subtree_check,insecure)
+ # nohide = export filesystems mounted deeper than the export point
+ # fsid=0 makes this export the "root" export
+ # not documented in the man page, but this means
+ # 1. it can be mounted with a shorthand of server:/
+ # 2. exports that are subdirectories of this one will automatically be mounted
+ tu /etc/exports <<'EOF'
+/k 10.0.0.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)
EOF
- s exportfs -rav
+ s exportfs -rav
fi
-if [[ -e /k/video ]]; then
- # nohide = export filesystems mounted deeper than the export point
- # fsid=0 makes this export the "root" export
- # not documented in the man page, but this means
- # 1. it can be mounted with a shorthand of server:/
- # 2. exports that are subdirectories of this one will automatically be mounted
- tu /etc/exports '/i/video 192.168.1.0/24(rw,fsid=0,nohide,no_root_squash,async,no_subtree_check,insecure)'
- s exportfs -rav
- showmount -e localhost
-fi
-
-
e "$end_msg_var"
-# persistent virtual machines
-case $distro in
- debian|ubuntu)
- pi libosinfo-bin;
- ;;
-esac
+# if I was going to create a persistent vm, i might do it like this:
+# variant=something # from: virt-install --os-variant list
+# s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
+ # --disk=/a/images/some_name.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
+ # -n some_name --import --os-variant $variant --cpu host-model-only
-# distro may not know about win 10 yet.
-variant=win7
-if ! virt-install --os-variant list &>/dev/null; then # we are using a newer virt-install
- for v in 10 8.1 8; do
- if osinfo-query os | gr "^\s*win${v/./\\.}\s" &>/dev/null; then
- variant=win$v
- break
- fi
- done
-fi
-
-if ! s virsh list --all --name | grep -xF win10 &>/dev/null; then
-
- # created account with
- # win10vmian@outlook.com, and easy to remember password
- # win 10 virtio, makes disk way way way faster
- # wget https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/latest-virtio/virtio-win.iso
- # https://wiki.archlinux.org/index.php/QEMU#Change_Existing_Windows_VM_to_use_virtio
- # for installing virtio after initial install instead of with initial iso:
- # qemu-img create -f qcow2 fake.qcow2 1G
- # --disk=/a/images/virtio-win.iso,device=cdrom \
- # --disk=/a/images/fake.qcow2,bus=virtio
- # Also,
- # went to device manager, saw 2 pci devices with yellow !,
- # did search for drivers, pick cdrom location, done.
- #
- # from http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html.
- # google said there was a control panel option for it, but
- # that turned out to be a lie.
- # Put this in a .bat file and run as administrator to turn off
- # hyberboot which fucks things up.
- # REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Power" /V HiberbootEnabled /T REG_dWORD /D 0 /F
- # power settings, turn off display: never
- # run "control userpasswords2", turn on automatic login.
- # note: when changing devices, I just undefine, the create the vm again.
-
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win10.qcow2,bus=virtio --vcpus 2 -r 4096 -w bridge=br0 \
- -n win10 --import --os-variant $variant --cpu host-model-only
-
- s virsh destroy win10
-
- # this one hasn\'t had the virtio fix done yet.
- s virt-install --noautoconsole --graphics spice,listen=0.0.0.0 \
- --disk=/a/images/win7.qcow2 --vcpus 2 -r 4096 -w bridge=br0 \
- -n win7 --import --os-variant win7 --cpu host-model-only
- s virsh destroy win7
- # had a problem with --cpu host, so trying out
- # --cpu host-model-only
-
-fi
-
-
-pi samba
-# note samba re-reads it's config every 1 minute
-case $distro in
- arch) s cp /etc/samba/smb.conf.default /etc/samba/smb.conf ;;
-esac
-
-# add 2 lines after workgroup option
-s sed -ri '/^\s*encrypt passwords\s*=/d' /etc/samba/smb.conf
-s sed -ri '/^\s*map to guest\s*=/d' /etc/samba/smb.conf
-s sed -i 's/\(\s*workgroup\s*=\).*/\1 WORKGROUP\n\tencrypt passwords = yes\n\tmap to guest = bad password/' /etc/samba/smb.conf
-# remove default homes section. not sharing that.
-s sed -ri '/^\s*\[homes\]/,/\s*\[/d' /etc/samba/smb.conf
-
-if ! grep -xF '[public]' /etc/samba/smb.conf &>/dev/null; then
- s tee -a /etc/samba/smb.conf <<'EOF'
-[public]
- guest ok = yes
- read only = no
- path = /kfrodo
-EOF
-fi
-
-case $distro in
- debian|ubuntu)
-# systemd claims it generates units from /etc/init.d, but it clearly doesn't
-# in debian. I have no idea how they are related. fuck debian right now. It's
-# not documented. samba has a systemd init file linked to /dev/null.
-# There's this https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=769714 which
-# claims samba's sub-services will be started automatically by systemd... it
-# didn't on install, wonder if it will on boot. It clued me in how to start
-# it manually though. Nothing in /usr/share/doc/samba, debian admin guide
-# says nothing about any of this. (this is in debian testing as of 4/2016).
-
-s /etc/init.d/samba start
-;;
- arch)
- sgo samba
- ;;
-esac
-
-tu /etc/hosts <<< "127.0.1.1 $(hostname).lan $(hostname)"
-
-
-
-rootdev=$(mount | sed -rn 's#^(\S+) on / .*#\1#p')
-s mkdir /mnt/root
-tu /etc/fstab <<< "$rootdev /mnt/root btrfs noatime,subvolid=0 0 0"
-mountpoint /mnt/root || s mount /mnt/root
-idev=$(mount | sed -rn 's#^(\S+) on /i .*#\1#p')
-if [[ $idev != $rootdev ]]; then
- s mkdir /mnt/iroot
- tu /etc/fstab <<< "$idev /mnt/iroot btrfs noatime,subvolid=0 0 0"
- mountpoint /mnt/iroot || s mount /mnt/iroot
-fi
######### begin stuff belonging at the end ##########
-# Apps we want to override others for default file handler:
-# simplest way in debian is to just install them last.
-simple_packages+=(
- mpv
-)
-
-case $distro in
- ubuntu|debian)
- spa spacefm-gtk3 ;;
- arch)
- spa spacefm ;;
-esac
-
-
-pi "${simple_packages[@]}"
-
-
if $pending_reboot; then
- echo "$0: pending reboot and then finished. doing it now."
- s reboot now
+ echo "$0: pending reboot and then finished. doing it now."
+ s reboot now
else
- echo "$0: $(date): ending now)"
+ echo "$0: $(date): ending now)"
fi
+exit 0